|
|
Order by: |
0 bids $20.00 Shipping
Condition: New Location: Austell, United States
Packing List: Machine+Drill*2+ Proportioning Bucket+Funnel+Filter+Small Accessories*7 Product Key Data Engineer Type：44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Impact Fregnency:1500bpm Impact Enengy: 20-55j Starter System：hand Pull Start Net Weight :20.5 Kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch） Cylinder Diameter * Stroke :44×34 Mm(1.73×1.34 Inches) Spark Plug Model: Bm6a Main Use and Feature.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 3 in 1 multifunction gasoline demolition hammer Powered by 2-stroke motor, with exchangeable drill and chisel to suit your needs Hand pulls start system offering a high degree of flexibility without cable Portable and lightweight for easy handling operation and convenient transport Widely used in concrete, bricks, rocks, construction and more Size & Weight: Overall Dimension: 24 13/16" x 10 5/8" x 10 1/4" (63x27x26cm) Engine Type: 36 x32mm; single cylinder; air cooling; 2 stroke Weight: Net weight of the machine (excluding the weight of the drill) : ≈10.5kg. 3pcs drill:22*350mm 1pc point chisel:18*350mm 1pc flat chisel: :16*280mm Specifications: Displacement: 32.6CC Impact Frequency: 3200min-1 Impact Energy: 30J Power：1200w.
0 bids Free Shipping
Condition: New Location: Austell, United States
Convenience and Comfort, the Operator Can Shovel Digging a 360 Degree Rotation. Chisel Speed, High Efficiency. Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1). Starter System：hand Pull Start. the Process of Using Machine May Lead to Gravel.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Convenience and Comfort, the Operator Can Shovel Digging a 360 Degree Rotation. Chisel Speed, High Efficiency. Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1). Starter System：hand Pull Start. the Process of Using Machine May Lead to Gravel.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 3 in 1 multifunction gasoline demolition hammer Powered by 2-stroke motor, with exchangeable drill and chisel to suit your needs Hand pulls start system offering a high degree of flexibility without cable Portable and lightweight for easy handling operation and convenient transport Widely used in concrete, bricks, rocks, construction and more Size & Weight: Overall Dimension: 24 13/16" x 10 5/8" x 10 1/4" (63x27x26cm) Engine Type: 36 x32mm; single cylinder; air cooling; 2 stroke Net weight of the machine (excluding the weight of the drill) : ≈10.5kg 3pcs drill:22*350mm 1pc point chisel:18*350mm 1pc flat chisel: :16*280mm Specifications: Displacement: 32.6CC Impact Frequency: 3200min-1 Impact Energy: 30J Power：1200w Max Torque an.
0 bids Free Shipping
Condition: New Location: , China
This rust removal gun has a strong impact force. Simply place it on the product that needs rust removal and strike naturally or apply slight force. The rust removal gun will start to heat up internally during high-speed operation.
Buy It Now
Free Shipping
Condition: New Location: Chicago, United States
Rated power： 1300W. It is an excellent tool for individuals working on demolishing, chipping, crushing, scraping, driving ground rods, and breaking through concrete. of impact energy for fast Chipping and Demolition Applications.
Buy It Now
Free Shipping
Condition: Used Location: Lockport, United States
Recently used at a Local Construction site so please expect some minor scratches, residue from use and other cosmetic imperfections. Shows wear from use, refer to pictures. We have multiple quantity available for purchase. Please see pictures carefully for further visual details as they are part of the description. This item is to be used for its intended purpose. We did our diligence cleaning this item, but this item can still use a good wipe down upon receipt.
0 bids Free Shipping
Condition: Used Location: Lockport, United States
This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
OEM Genuine Switch Guide part number 455511-4.
0 bids Free Shipping
Condition: Used Location: Augusta, United States
BAUER SDS MAX-TYPE PRO.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New – Open box Location: Saint Louis, United States
PART NUMBER 615.5361.
0 bids Free Shipping
Condition: New Location: Chino, United States
Convenience and comfort, the operator can shovel digging a 360 degree rotation. Engineer type：44mm, Single eylinder, air coling,2 stroke. Fuel:mixing oil(gasoline 25, two-stroke engine oil 1). Starter system：Hand pull start.
0 bids Free Shipping
Condition: New Location: La Puente, United States
NOTE: This product is heavy and light, easy to fall in the vertical state, please pay attention to posture to avoid falling and damage the machine, due to falling products damaged, the company does not assume after-sale responsibility. Product key data Engineer type：44mm, Single eylinder, air coling, 2 stroke Fuel:mixing oil(gasoline 25, two-stroke engine oil 1) Fuel tank capacity:1.3L Displacement:52cc Max power and speed:1.9K W/6500r/min Max torque and speed:3.5N.m/5000r/min Consmption rate:≤0.6L/h Impact fregnency:1500Bpm Impact enengy:20-55J Starter system：Hand pull start Net weight :20.5 kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch） Cylinder diameter * stroke :44×34 mm(1.73×1.34 inches) spark plug model: BM6A.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Dig up Soil Ball. Fuel: Gasoline/ 4 Stroke Engine Oil. Tree Digging and Root Cutting. Scope of Application Tree Transplanting. Net Weight : 16.5kg (36.4 Ib). Rock Breaking. Power and Speed: 1.2kw/8500r/Min.
Buy It Now
$42.09 Shipping
Condition: Brand New Location: Pascoe Vale, AU
(Standard 30mm / 1.1/8" Hex). Solid Heavy Industrial / Trade Quality, built solid for Australian conditions.
Buy It Now
Free Shipping
Condition: New Location: Greensboro, United States
BY SKIDRIL. Skidril high quality design, materials and build make this a rel iable driver.
Buy It Now
$9.99 Shipping
Condition: New Location: Reading, United States
FOR SALE IS THE NOS PART PICTURED.
Buy It Now
Free Shipping
Condition: New Location: Council Bluffs, United States
0 bids Free Shipping
Condition: New Location: Austell, United States
Features: 3 in 1 Multifunction Gasoline Demolition Hammer Powered by 2-Stroke Motor, with Exchangeable Drill and Chisel to Suit Your Needs Hand Pulls Start System Offering a High Degree of Flexibility Without Cable Portable and Lightweight for Easy Handling Operation and Convenient Transport Widely Used in Concrete, Bricks, Rocks, Construction and More Size & Weight: Overall Dimension: 24 13/16" X 10 5/8" X 10 1/4" (63x27x26cm) Engine Type: 36 X32mm; Single Cylinder; Air Cooling; 2 Stroke Net weight of the machine (excluding the weight of the drill) : ≈10.5kg 3pcs Drill:22*350mm 1pc Point Chisel:18*350mm 1pc Flat Chisel: :16*280mm Specifications: Displacement: 32.6CC Impact Frequency: 3200min-1 Impact Energy: 30j Power：1200w Max Torque and Speed: 1.5n.m/5000r/Min0.5l/H Fuel Type: Mixed.
Buy It Now
Free Shipping
Condition: New Location: , China
We will respond to you within 24 hours and do our best to help you out!
Buy It Now
Free Shipping
Condition: New Location: , United States
MAKITA GENUINE 723008-4-2 72300842 JIG SAW BLADES.
0 bids Free Shipping
Condition: New Location: Chino, United States
Petrol Concrete Saw Portable Cutter Circular Cut 125mm Blade Brick Masonry Stone. Material: Aluminum Saw Blade: Grinding Wheel. Saw Blade + Oiler + Master Cylinder Tool. Precise Cutting, Efficient Cutting of a Variety of Materials, High-precision Design, Seamless Integration Technology.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specifications: --Material: 40Cr Chromium steel --Size: 30*440*135mm --Suitable type: suitable for 65/95 Jack hammer --Color: Silver Application: --Hammer shovel can only be used for vulnerable objects, such as concrete, stone, etc. Never for metal objects such as steel bars. Features: --Made of high quality 40Cr chromium steel as raw material --High temperature quenching greatly improves hardness --The product life is longer than that of ordinary carbon steel. --65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Package included: 1 x Jack hammer Clay Spade Chisel.
Buy It Now
Free Shipping
Condition: New Location: Minooka, United States
HALDER SUPERCRAFT 3377040. SPEEDAIRE 30E688 Quick Connect,Socket,3/8" Body,1/4" PK 10. Grainger Part #:3ZLR4. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Color: Black Material: Aluminum, Plastic Style: Modern Surface Treatment: Painted Process Assembly Required: Yes Power: 1200W Displacement: 32.6CC Engine Type: Single Cylinder, Air Cooling, 2-stroke Impact Frequency: 3200min-1 Impact Energy: 30J Max Torque and Speed: 1.5N.m/5000rpm Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil) Fuel Tank Capacity: 0.9L/0.2gal/30Oz Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour Max Drilling Diameter: 40mm/1.5inch Starter System: Hand Pull Start Noise: ≤104dB Net Weight (Exclude Drill): About 10.5kg/23lbs Product Size (L*H): 63*24cm/24*9inch Engine Size: 36*32mm/14*12inch Drill Size: 22*350mm/0.8*13inch Point Chisel Size: 18*350mm/0.7*13inch Flat Chisel Size: 16*280mm/6*11inch Auxiliary Handle Length: 13cm/5inch I.
0 bids $15.99 Shipping
Condition: Used Location: Middlebury, United States
MPN: 8500 LSC. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. Weight (lbs, oz): 5. To get a freight quote we will need to know the following.
0 bids Free Shipping
Condition: New Location: , United States
VARIETY OF APPLICATIONS: the powerful demolition power drill is perfect for demolition, trenching, cutting and hole-breaking work on concrete, masonry, brick and tile.
Buy It Now
Free Shipping
Condition: New Location: Birdsboro, United States
NEW Makita GMH02PM 40V X2 80V max XGT Brushless 28 lb. We will always work it out.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
OEM Genuine Makita part.
0 bids $20.00 Shipping
Condition: New Location: Monroe Township, United States
Description Good tools are indispensable for the complicated work of breaking up concrete and block. Made of high-quality steel and PP, and adopting a painting process, this item lays a foundation for your long-term use. 1900W power, 52cc two-stroke engine, and 6500 r/min speed can greatly improve your efficiency. With it, you can completely say goodbye to the traditional breaking method and work more easily. Key Features Bulid to Last: High-quality steel and PP, and painting process make this product solid, wear-resistant, impact-resistant, and rustproof, so it can keep beautiful and practical without frequent replacement. High Efficiency: The 52cc 2-stroke engine, 1900W power, 6500r/min speed, and 3.5Nm torque provide impact energy of up to 20-55J and impact times of 1500bpm, so it c.
Buy It Now
Free Shipping
Condition: New Location: Bellflower, United States
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Power: 650W. You can push the forward and reverse switch to the middle position of the handle to lock the screwdriver, which improve safety. In addition, turning the switch clockwise and counterclockwise makes it easy to tighten or loosen the screws.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Size & Weight: Overall Dimension: 24 13/16" X 10 5/8" X 10 1/4" (63x27x26cm) Engine Type: 36 X32mm; Single Cylinder; Air Cooling; 2 Stroke Net weight of the machine (excluding the weight of the drill) : ≈10.5kg3pcs Drill:22*350mm 1pc Point Chisel:18*350mm 1pc Flat Chisel: :16*280mm Specifications: Displacement: 32.6cc Impact Frequency: 3200min-1 Impact Energy: 30j Power：1200w Max Torque and Speed: 1.5n.m/5000r/Min0.5l/H Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil) Fuel Tank Capacity: 0.9l Fuel Consumption Rate: ≤0.5l/H Max Drilling Diameter:40mm Starter System: Hand Pull Start Package Contents: 1x Gasoline Hammer Drilling Machine 3x Drill 1x Point Chisel 1x Flat Chisel 1x Toolkit 1x Oil Can (Empty).
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
HALDER SUPERCRAFT. Anvil 0308003201 Cast Iron Threaded Flange, Faced And Drilled Class 125. Condor 30Hg96 Body Belt, 2 D-Rings, Size L. Lyle T1-3138-Eg_18X12 No Trespassing Sign, 12 In H, 18 In W, Aluminum.
Buy It Now
Free Shipping
Condition: New Location: Athens, United States
Buy It Now
Free Shipping
Condition: New Location: Greensboro, United States
BY SKIDRIL. Skidril high quality design, materials and build make this a rel iable driver.
Buy It Now
$26.99 Shipping
Condition: New Location: Memphis, United States
Size:2200Watt perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! Includes: 1-1/8" Bull Point Chisel, 1-1/8" Flat Chisel.
Buy It Now
$65.99 Shipping
Condition: New Location: , China
The 19PCS3MM flat-head steel needle can be replaced during use. The operation of the pressure plate switch is labor-saving and convenient.
Buy It Now
Free Shipping
Condition: New Location: , KR
Anti-Vibration Technology: The HM0810TA(HM0810T) is built with an anti-vibration system that reduces vibrations during use. It is important to follow proper safety guidelines and wear appropriate protective gear during use.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Material: Steel, PP Surface Treatment: Painting Model: 125A Engine Type: 44*34mm/17.32*13.39inch Air-Cooled Single-Cylinder Two-Stroke Fuel: Mixed Oil Ratio: 25: 1(92#Gasoline: Motor Oil) Fuel Tank Capacity: 1.3L/54.95oz Displacement: 52cc Fuel Consumption Rate: ≤0.6L/h /25.36oz/h Impact Energy: 20-55J Impact Times: 1500bpm Max. Power And Speed:1.9kw/6500r/min Max. Torque And Speed:3.5Nm/5000r/min Color: Black+Red Style: Modern Power Source: Gasoline Powered Starter System: Hand Pull Start Carburetor Type: H119-6A-00-210 Spark Plug Type: BM6A Number of Items: 1 Number of Chisels: 2 Assembly Required: Yes Mount Type: Floor Standing Product Size: 40*27*95cm/15.75*10.62*37.4inch Chisel Type: Pin Card Type (Without Thread) 28*400mm (1.1*15.75inch).
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
It is made with high-grade forged and heat-treated steel for maximum durability. Tamp and compact loose granular soils, gravel, and sand. Tamp and compact aggregate materials such as loose granular soils, gravel, or sand with 6 in.
Buy It Now
Free Shipping
Condition: New Location: Hollywood, United States
Brand new in box
0 bids Free Shipping
Condition: New Location: Chino, United States
65a Shovel Is Only for Objects with High Hardness and Brittleness, Such As Concrete, Brick Wall, Stone, Etc. Your satis faction is our ultimate goal. --Made of High Quality 40cr Chromium Steel As Raw Material.
Buy It Now
Free Shipping
Condition: New – Open box Location: Williston, United States
Other Numbers: 849 & HS1515?. 7 bits are for sale and all have varying degrees of rust on them.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
●Shank Types: Round Shank. Fast and easy installation. High hardness，Stable and Durable. Sharp and fast breaking. ● Due to the light and screen difference, the item's colour may be slightly different from the pictures!
Buy It Now
Free Shipping
Condition: Seller refurbished Location: Trenton, United States
Model: APT 160. All of the parts inside have been replaced with new ones. Only the body is used but it has been reconditioned. We have specials on 10 piece orders. Just ask us. Capacity: 1 1/8" Hex X 6.
Buy It Now
$155.00 Shipping
Condition: New – Open box Location: Carlsbad, United States
INGERSOLL RAND. Vibration Reducing Handles. Hex Shank Size. (1) Bare Tool. Exhaust Location. Air Inlet Size. Stroke Length. Air Inlet Type.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description This hammer drill is equipped with an infinitely variable speed button, so you can adjust the speed(0-3000rpm) according to different types of materials and jobs, providing more precise operation for your drilling jobs. In addition, it is small and comfortable to hold, which helps reduce fatigue during long working hours and is ideal for DIY craft projects. This is an ideal gift for relatives, friends and lovers. Key Features High-quality Material: This product adopts a high-quality alloy drill, pure copper motor, and ABS shell as raw materials, with high hardness, high wear resistance, and durability characteristics. Dual Modes: The dual modes allow you to easily switch between flat and impact drill functions depending on your task. High Efficiency: Adopting an 8.
0 bids Free Shipping
Condition: Used Location: Upper Marlboro, United States
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power Source Custom Bundle Does Not Apply.
0 bids Free Shipping
Condition: Used Location: Lockport, United States
Location: Fox Solutions Suite. Bottom Warehouse Rack Pallet by Crate 96.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Application: Hammer shovel can only be used for vulnerable objects, such as concrete, stone, etc. Never for metal objects such as steel bars. Features: Made of high quality 40Cr chromium steel as raw material High temperature quenching greatly improves hardness The product life is longer than that of ordinary carbon steel. 65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Package included: 1 x Jack hammer Clay Spade Chisel Specifications: Material: 40Cr Chromium steel Size: 30*440*135mm Hexagonal Edge Length: 30mm/1.18inch Length Of Diagonal Edge: 34mm/1.34inch Shank Diameter: 24mm/0.94inch Top Diameter Of Handle: 20mm/0.79inch Suitable type: suitable for 65/95 Jack hammer Color: Silver.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Jack Hammer Clay Spade Shovel Chisel Bit 1.18in Demolition Hammer Tool Silver Specifications: --Material: 40Cr Chromium steel --Size: 30*440*135mm --Suitable type: suitable for 65/95 Jack hammer --Color: Silver Application: --Hammer shovel can only be used for vulnerable objects, such as concrete, stone, etc. Never for metal objects such as steel bars. Features: --Made of high quality 40Cr chromium steel as raw material --High temperature quenching greatly improves hardness --The product life is longer than that of ordinary carbon steel. --65A shovel is only for objects with high hardness and brittleness, such as concrete, brick wall, stone, etc. Package included: 1 x Jack hammer Clay Spade Chisel .
0 bids Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
0 bids Free Shipping
Condition: New Location: Chino, United States
Breaker Hammer,Heavy Duty Concrete Breaker,Gasoline-Powered Breaker Hammer,37.7cc 4 Stroke Gasoline Demolition Jack Hammer Drill Chisel Concrete Breaker,Hammer Drill,Max Power 1.2kw Speed 8500r/Min Product Parameters: Machine Size：69*37cm (27.2*14.6 Inch) Net Weight : 16.5kg (36.4 Ib) Engine Type: 40*30mm. Single Cylinder, Air Cooling, 4-Stroke Fuel: Gasoline/ 4 Stroke Engine Oil Displacement: 37.7cc Fuel Capacity: 0.65l Max. Power and Speed: 1.2kw/8500r/Min Max Torque and Speed: 1.2nm/5500/Min Fuel Consumption Rate: 0.47l /Kw.h Scope of Application: 1.Rock Breaking 2.Dig up Soil Ball 3.Tree Transplanting 4.Tree Digging and Root Cutting 5.Tamping Packing List: Hammer+ Sharp Chisel+ Flat Chisel+ Toolkit+ Measuring Cup+ Gauze+ Funnel.
Buy It Now
$5.95 Shipping
Condition: New Location: , PR
D25980 Type 3 68 Lbs.
0 bids Free Shipping
Condition: New Location: , United States
Description: This demolition jack hammer can make light work of breaking up concrete and block quickly and easily. This hammer is powerful enough for most heavy-duty job applications, yet lightweight for effortless control. It features ultimate companion for any demolition task. Suitable for tearing up foundations, ripping up driveways, demolishing re-enforced, concrete floors or walls, breaking through solid rock, etc. It combined with a high tensile reduction gear set and the highest special motor and mechanical components. This jackhammer perfectly matched 52cc power unit allows for maximum demolition force. Specifications: Engine Type: 44 x 34mm, Single cylinder, air cooling, 2 stroke Material:Steel+PP Displacement: 52CC Fuel:mixed oil (25 gasoline: 1 motor oil).
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Key Data Engineer Type：44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Impact Fregnency:1500bpm Impact Enengy: 20-55j Starter System：hand Pull Start Net Weight :20.5 Kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch）.
|
|
|
|
Large 90 Lb Jackhammer. Model# TP6020266. Serial# 50775428-1A. Pneumatic O/D- 29" x 17" x 8" This does not come with any bits or air hose.
|
|
Hitachi Rotary Hammer Drill 1-9/16" DH40MRY DH 40MRY ITEM IS USED! Was tested and works good. Picture is actual item you will receive. Please see pictures for best item description. Comes with everything shown in pictures. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All ... moreof our items will typically ship within 2-3 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. We use only UPS Ground Service and are not able to ship to P.O Boxes and APO's. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concerns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding
|
|
DEWALT 24V XR NICd CORDLESS HAMMER DRILL w/ EXTRAS This item is in GREAT working condition and GOOD cosmetic condition Drill shows scuffs and scratches. It is also missing label. Please see pictures for more details. Items included: Hammer drill, 1) 24 volt battery, Charger, 6) drill bits, Carrying case Item comes as pictured Please ask any questions before bidding Thanks for looking Payment: Paypal Payment must be made within 2 days after the end of the auction. ECheck If you plan to pay through E–Check Contact me immediately ending the auction. It can take up to 7 working day for check to clear. Shipping: I only ship to CONFIRMED addresses NO PO boxes NO exceptions. Shipping price listed is for the lower 48 states. If you live outside the Continental US contact me for shipping quotes as ... morethey will vary. Once payment is received& cleared by PayPal. The item is shipped within 1 to 2 business days. I do not ship on weekends unless prior arrangements are made. Local pick-up can be arranged but arrangements must be made prior to purchase and/or auction end. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return. I do my very best to describe items accurately& answer all questions to the best of my knowledge quickly. I will always try my best to make your shopping experience a pleasant one. I will leave feedback as soon as feedback is left for me! Please ASK any questions you may have before bidding on any items! Please do not assume anything. If it is not shown in the pictures or written in the description, chances are, it does not come with it! Refund: Shipping charges will NOT be refunded! No Exceptions! BUYER IS RESPONSIBLE FOR ALL return shipping costs! Thank you for your time& your business is much appreciated
|
|
|
used electric chipping hammer works good for small jobs two points included Posted with
|
|
Bosch Brute Breaker Hammer 061 1304 139 Up for auction is a used Bosch Brute Breaker Hammer 061 1304 139 in good working condition. Item shows normal use. The auction will include the bits and Hammer only. The cart is not included and will not be shipped with this item. Only what is pictured is included with auction. Powerful breaker hammer that operates without a compressor for true portability. Operates on 115/120V AC/DC. 15 amp. outlet or 2500-Watt portable generator. Grease-Packed gear box and hammer mechanism; Service Minder brush system; shock mounted handles- absorbs vibration. 2-way tool retainer accepts standard 1-1/8-Inch hex. Air-tool steel with retaining collar of Bosch internal locking combo steel. 29-3/4-Inch long; weighs 64-Pound. ALL LOCAL PICK UPS MUST PRESENT A PHOTO ID AND ... moreHAVE A COPY OF YOUR INVOICE. PLEASE EMAIL ME TO SCHEDULE YOUR APPOINTMENT TO PICK UP YOUR PURCHASE. A Note About Shipping All of our auctions start at.01 with NO RESERVE and we now offer FREE SHIPPING. Free shipping does not apply to residents in Hawaii or Alaska. Please contact us for a shipping quote to those states. If you wish to have a specific delivery option that we do not offer, please notify us before paying so that we can send a revised option. Please be aware any upgraded shipping options may not be covered under our free shipping service. PRODUCT DESCRIPTION This product has been described to the best of our knowledge and in the greatest detail and truthfulness. We have also taken detailed photographs of the actual product being sold. These photographs often describe the item better than words. We have made every reasonable effort to disclose any known defects. We test our products to the best of our ability. DISCLAIMER Fast Cash Pawn Brokers is a resale store. We can not tell you if the item originally came from a smoke-free or pet-free home. New items may or may not be eligible for a warranty through the manufacturer. Please contact the original manufacturer to see if your item is eligible. We have 2 ot
|
|
|
This item is used. Functions properly that case is broke in spots and has a little oil in the bottom of the carrying case LW-2693-F2-4. Powerful Demolition Jack Hammer/Breaker, Industrial Grade. Durable& Easy To Operate, Heavy Duty Construction, input motor:3600 watt, Voltage: 110V/60Hz, Speed: 1900 Impacts Per Minute(55j) 360°Swivel Handle, Includes: 1-1/8" Bull Point Chisel. 1-1/8" Flat Chisel, Blowmod case(case may damage during shipping as is) perfect for demolition. Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! Suitable for home and business Applications, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
a used Bosch hammer drill with 4 bits. Model 11316EVS, its in good working condition comes with what you see and a nice box for storage. Please see photos for condition of this item. I will be happy to answer questions if I am able to about the item. Payment or payment arrangements must be made within 7 days of Purchase. I will ship UPS USPS Priority or Fed Ex from 94501 unless other arrangements are made. Please provide a physical address because UPS does not normally ship to P.O. boxes. If you are in the market for more tools please check out my! Alert! ALERT! ALERT! Please be aware of the fact that scam artists are everywhere and even though eBay tries to contain this problem they are still lurking. Recently I sold an item and the buyer received an email with instructions to send the payment ... moreto a certain address. This email was not sent by me. This smart buyer contacted me and I told him it was a spoof and to send a copy of the scam letter to spoof@ebay.com so if you win an auction from me I prefer Pay Pal, please do not respond to an email from me requesting that you send the item by wire transfer or any other method and please forward the email to eBay. Thanks!
|
|
|
I have a like new if not new IR Ingersoll Rand CHIPPING HAMMER Air Powered SIZE 3 with 7 tools and collar for sale! Check out the photos. I tried it out and it works great. Check out all the tools with this rig- u know what these cost new- save a bundle of money here!
|
|
|
USED INGERSOLL RAND PB 35 A PAVEMENT BREAKER JACKHAMMER PNEUMATIC AIR DEMOLITION AS YOU CAN SEE THIS TOOL IS BEEN PAINTED IT MAY HAVE SOME SPOTS MISSING PLEASE LOOK AT THE PICTURES CLOSELY TO MAKE SURE IS SOME THING YOU ARE LOOKING FOR IF HAVE ANY QUESTIONS PLEASE ASK ME BEFORE BUYING THANKS.
|
|
Description This was received from a retired railroad worker(along with 2 other items I will be listing) This was working when he retired. It has not been used since. Additional pictures are located at the bottom of the ad. We try our hardest to give 5-Star Service by giving Clear. Accurate and Honest descriptions to the best of our abilities. We also clearly state our return policies and shipping terms upfront so you know what to expect. If you are pleased with this transaction. Please respond with all 5 Stars! If you are not pleased for any reason, Please contact us using the Contact Seller link on the auction page, and we'll try and make it a Five Star Sale! Sales within the State of Colorado Will have State and local tax applied where applicable. We take care to pack your items professionally. ... moreTherefore items can take up to 7 days or more to ship after payment has cleared when we are backed up. Typically it is only a couple of days after but it does very through the seasons. If there is a critical need for immediate shipping(24 hours from time of payment, Monday through Friday) please let us know immediately after payment has been made.
|
|
Atlas Copco Cobra MK1 Gas Petrol Powered Concrete Breaker Jackhammer*TAX INVOICE INCLUDED IN ALL PURCHASES* PLEASE READ* By participating in the sale or auction. You have read and agreed to ALL of our terms and conditions. For more information. Please click on the below links. Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback Overview On offer is a Atlas Copco Cobra MK1 Gas Petrol Powered Concrete Breaker Jackhammer Buy in confidence with our 30 Day return-to-base warranty. See terms and conditions for more information. See the unit in action below: Sale includes 1 x Atlas Copco Cobra MK1 Gas Petrol Powered Concrete Breaker Jackhammer. Please note that the Jackhammer Bit/ Chisel is NOT included in the sale and was used for ... moretesting purposes only. Condition Item is used but in great working order when it was removed from service. Overall conditions is good. The images in the listing are of the actual item you will receive. The unit has been tested and is in great working order. There are cosmetic blemishes on the case but it doesn't affect it's performance. Additional photos are available upon request. Manufacturer's Overview The Cobra mk1 is the hardest hitting gas driven breaker on the market. It incorporates a number of unique design features such as the vibration-dampened handle frame which serves both as a protection against rough handling and a fuel tank. Keeping the fuel away from the heat of the engine.Thanks to the patented leaf spring construction vibrations are down to an unprecedented 2.3 m/s2. The Cobra mk1 meets the toughest emission requirements in the world, and has been EPA 1 approved. Hard hitting. 60-joule performance Ideal for a wide range of applications Extremely low vibrations Easy maintenance and service Specifications For full specifications- All offers(if available) are welcome! Please submit them through the Best/ Make Offer option* Don't forget to view our other items to take advantage of our combined post
|
|
|
Item tested. Functions properly. Plug in will need replaced(see photos) Powerful Demolition Jack Hammer/Breaker, Industrial Grade. Durable& Easy To Operate, Heavy Duty Construction, input motor:3600 watt, Voltage: 110V/60Hz, Speed: 1900 Impacts Per Minute(55j) 360°Swivel Handle, Includes: 1-1/8" Bull Point Chisel. 1-1/8" Flat Chisel, Blowmod case(case may damage during shipping as is) perfect for demolition. Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more! Suitable for hom, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Item tested. Works great. Cord has a small split where wire shows, missing attatchments Electric Demolition Jack Hammer/Breaker, Industrial Grade. Very Durable, Heavy Duty Construction, Very Easy To Operate, Motor Power: 2200 Watts, Voltage: 120V/60HZ, No Load Speed: 1900RPM, 360° Swivel Handle, Slip Prevent Handle Grip, Heavy Duty Steel Case With 2 Wheels& Handle, Perfect For Demolition. Trenching, Chipping, Breaking Holes In Concrete, Block, Brick, Tile Stucco, Removing A Foundation, Concrete Slab, Oil Chimney And Much More! Suitable For Home And Business, Hex Minimum Width: 1" Makes Digging Trenches With Ease, Faster And Smoother Than Using Chisel Heads, Storage Carrying Case Included, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
FLAT CHIPPING HAMMER CHISEL SET 12" X 1" 24 X 1" 0.680 This item are as shown in pictures; The 12" Chisel it is heavily used and need to be re-shaped at the end. However the 24" Chisel appears to be unused and it is sharp at the end. Also these items do have rust. COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair ... morethe item or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCyberOffice The place for all your tools. Military surplus and much more needs Visit my eBay Store: MyCyberOffice
|
|
Dewalt Demolition Hammer Drill w/ 1 Bit Works Good! You are bidding on Dewalt Demolition Hammer Drill w/ 1 Bit Works Good! Item is used but in good working condition. I don't have a model number. It looks DW53XXX. As you see in pictures. There are lot of usage signs( scratches, scuffs, dents, wear, from works but nothing major. Tested.Works Good! Auction includes a hammer drill and one bit. Comes as showing in pictures. Thanks for watching my item. Good luck! =========================================================================================================================. Payment We accept PayPal and we ship just to the confirmed PayPal address on file for the order. We require immediate payment for all fixed price listings. We do not hold the unpaid items. We just release them ... moreto costumers who pay for their orders. If not paid in full within 5 days the order will be cancelled and an Unpaid Item Notification will be filled. Sales Tax We are required by State law to collect 9.6% Sales Tax for shipments to Washing State address Shipping We ship within USA and its territories by USPS or UPS. We do NOT ship internationally. Orders are processed and shipped within 1 business day. Return Policy Please be sure you are ordering the right item. If you are not sure that the item you want is suitable for you please email us before buying it. Returns caused by buyer mistake may be subject to a 20% restocking fee and the return shipping is paid by the buyer 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147509ab11e-0x110-
|
|
|
Rarely used Bosch electric Jackhammer. Cleaning out garage and have no use for this item. I would drop off item to shipping facility within 20 miles if buyer arranges and pays shipping cost. Posted with
|
|
|
This is a great little digger that we bought to dig out in a basement and few other tight spaces. It worked great! The group include the Ingersoll Pneumatic unit itself and two spade bits. One is like new and the other is used but not used up by a long shot. This has sat in the shop for long enough and I am to old to be climbing under houses anymore. But if you need to dig in a small space and have the air power to run this there is no better way. I did not respray it to make it look newer then it is. This is what it is. If you choose to it would be super easy. Hook up your air hose and dig away. I will only ship with in the lower 48. If you want it shipped else where contact me before you bid.
|
|
Up for Sale is this Preowned Makita HM1307CB Breaker w/ Hauler and 1 Bits Unit is preowned. It is in excellent working conditions. Turns right on. Very powerful, no burnt smells, no power losses, no sparks, No issues, No surprises, No headaches. Unit comes with everything pictured which is the Breaker. The cart, and 1 bit. It is ready to use as soon as it arrives. You will not be dissapointed. Unit has been lightly used just a few times. Unit is 100% mechanically sound! Comes only with what you see pictured. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this item fits your needs. Our ... morereturn policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is recieved. We have items ready to ship by the time our item is listed. We are an e-commerce business. We sell strictly online and we do not offer merchandise pickups. We don't have the proper insurance requirements to greet walk-in customers. We are registered with paypal and feel its the fastest and safest way to complete the transaction. We accept other payment methods aswell. We've moved over our online sales from amazon.com. We look forward to serving your tool. Equipment, and parts needs. Any questions please send us a message through ebay or to our email. We respond emails and ebay messages promptly. Thank you. Best of wishes, and good luck bidding! We look forward to your business.
|
|
|
You are looking at a TE 3000-AVR 120-Volt Polygon Hammer Breaker. Pre-owned polygon breaker but in good working condition. The hammer breaker includes; 4 bits showed in the photos. And dolly. Please revise photos carefully Item comes as shown in the pictures below. Please do not hesitate to ask any questions. Thank you. Please if you have any issues with your purchases please contact us as soon as possible. We will be contacting you immediately. Thank you.
|
|
|
For sale is a good working pneumatic air chipping hammer tool
|
|
Hilti TE3000-AVR Jack Hammer Breaker Electric Polygon 120V Jackhammer Demolition. From the Manufacturer PRODUCT OVERVIEW Hilti is breaking the rules again.Break free from the hassles of pneumatic breakers and other electric tools with the new Hilti TE 3000-AVR. The breaker that promises to revolutionize the demolition market. Hilti's flagship breaker enters the market with innovations that make it the first 65 pound electro-pneumatic tool that can literally perform head to head with air breakers of the same weight. This means less set up time to get that compressor going, no annoying hoses and gasket leaks, and no more diesel thirsty compressors needed for medium to heavier duty breaking jobs. Our powerful SR brushless motor provides previously unheard of power to weight ratios by eliminating ... morethe carbon brushes and copper windings that add weight to traditional motors. The Hilti TE 3000-AVR is engineered to last and allows you to work much longer between service or repair cycles thanks to a three chamber sealing system and active cooling design. Try the best and break free to new levels of productivity and durability. Over 50 ft. pounds of impact energy results in outstanding demolition performance and productivity SR brushless motor delivers tremendous demolition performance while keeping weight down Active Vibration Reduction(AVR) achieves the lowest vibration in its class TE-H polygon self-sharpening chisels provide strong breaking power and stick less in concrete Active cooling system for the motor. Electronics and hammering mechanism keeps the tool and its casing cool for added durability Use for medium to heavy-duty demolition of concrete slabs and foundations; concrete removal for rebar; asphalt and road patch work; penetrations for pipes. Electrical boxes and HVAC Innovative detachable cord Condition Great working condition. Performs as it should. This will out-perform any other jackhammer on the market by at least twice as fast. Be sure to check out some YouTube videos Hilti made comparing it to Bosc
|
|
You are looking at a TOKU Air Powered Jack Hammer Clay Digger w/ 3-11/32" Stroke Model No. TCD-30. Detailed condition information: The item is used with some signs of wear The item is made by TOKU The item is air powered The item is a Clay Digger Jack Hammer The item is 3-11/32" Stroke The items Shank Size 7/8×3-1/4. 1×4-1/4 Model No TCD-30 Great for home or commercial use! The item functions as intended. Please go over the information we have provided on this item. And review the images for a detailed look at what you are buying. If you have any questions regarding this item or would like more information, please contact us. Us on Facebook for exclusive deals and flash sales! Follow us on! Check Instagram for all of our most recent inventory! Purchase with confidence in ... moreour items. The Tool Box Co stands behind our customers. Please do not hesitate to contact us, visit our store page: http:stores.ebay.com/The-Tool-Box-Co for more information. We put customer service above all else and will do our best to make you a completely satisfied and returning customer. Store Policies Condition: We take pride in the quality of the items we sell. All of our items are tested and described to the best of our ability. All of our items are sold as is with no warranties expressed or implied. Please see item description for clarification. Be sure to read our listings thoroughly to make sure you understand what you are buying. Please view the photos for the exact item that you are looking at. Payment: Please send your payment within 7 days of the listings end time. This allows us to make sure we can get your purchase to you faster. And this makes the process run smoother for both parties. We accept payment via PayPal only please. We like to stay away from international order due to high shipping costs but we are willing to ship internationally for a handling fee of $15. Shipping and Handling: All of our items are shipped quickly and securely to make sure they arrive to you in the same way they are shipped. We sh
|
|
This is/was a great demolition hammer. It is about 9 years old. And we are changing over to Bosch tools so we are not going to hang on to this tool anymore. This tool has recently been serviced, and has a new gear housing cover(the yellow plastic bottom near the cord) and new internal lubricants. We also replaced the cord. Last year we replaced the variable speed control and switch. Currently, the speed control and the switch are not working. Since we had two of these tools(the other one is listed too) we did not look to repair this tool right away. This tool was working up until about two months ago. It should only need a new switch and speed control. This has been a fantastic tool for our needs. Generally we use this to break up a small section of basement floor with a point and a chisel. ... moreThen switch over to a clay spade to dig out piers for steel posts. We have also used it to break up small sections of sidewalk and masonry walls. It is definitely not a breaker hammer since it does not hit hard enough to make breaking up a large area of concrete very quickly. For that, we usually rent a full size breaker. The case is plenty big for the tool and several bits. We had 3 points, 3 chisels, a clay spade, and a bushing tool all in the case with the tool. With just the tool, the case weights about 34 pounds. With all the bits, it came in at about 50. The case is pretty large and measures about 32"x16"x7" It could be locked if you want. We do not paint our tools. So the only marks on the tool are those it received through use. This is being listed for parts or not working since it currently is NOT working. As mentioned before. It should only need a new electronics(switch and speed control) We purchased a new Bosch demolition hammer so we no longer need this one at all. The starting price is what we could get for it on trade in from DeWalt on a new demolition hammer if we wanted to stay with DeWalt, but since we are going with Bosch, we have no need, but are using that figure as the established value. Ty
|
|
Hilti TE 50 Combi Drill. EBay Links. Click any image to see it full size. Item Description. For sale today is this Hilti TE 50 SDS max combi hammer drill. The drill is in pretty nice cosmetic condition overall and doesn't look like it was used too much. It has some scratching and scuffs on the body but no signs of heavy damage. It's been plugged in and tested and all features are in good working condition. Chuck size is 1 3/4" Comes with one 1/2" Hilti cement bit and Hilti carrying case. Feel free to ask any questions. Shipping Details. We ship all items through USPS& FedEx. All of our items will be shipped no later than the next business day after your payment is received. We do not offer international shipping. If you need any special shipping arrangements please feel ... morefree to contact us prior to bidding on the item. We welcome local pick up. Payment Details. Paypal is our preferred method of payment. We require payment of all items within 5 business days after the close of the auction. Our Feedback Policy. If you are satisfied with your transaction we would appreciate your positive feedback once you have received your item. In the unlikely event you have a problem please contact us prior to leaving bad feedback so that we can try to resolve the issue with you. We are very good about leaving feedback for our customers in a timely manner. at BiggerBids.com. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1475feb2a81-0x115-
|
|
|
KENT KBH 400 hydraulic breaker. Demolition hammer.used. I think it is a 750 ft lb class? It was used on a Kobelco 50sx excavator. It is the size for a full size backhoe. Such as case 580, cat 415, John Deere, etc. or can be used on a 10,000 lb-16,000 lb excavator. tool is about 3" can ship anywhere in the US. Buyer pays all shipping charges. I can put on pallet and have ready to ship at an additional $50. No warranties expressed or implied. As with any used construction equipment. It is as is where is. All sales final. Spacers in picture are not included. Thank you for bidding! Very LOW RESERVE for this heavy duty commercial Breaker!
|
|
|
Kubota KXB 500 Hydraulic Breaker Jack demo Hammer with new hoses. Ready to work!
|
|
i000000. Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Just one of inkFrog's Creations: Description Chicago Electric Professional Demolition Breaker Hammer Serial#93853 115 VAC 60 HZ 11 Amp Variable Speed 900-1800 RPM Accepts SDS Max Type Bits This product has been tested and runs with no issues. You have our guarantee. Location: J-01-2 LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES ARE GIVEN OR IMPLIED. ALL ITEMS CAME FROM A WORKING ENVIRONMENT WHAT YOU SEE IN THE PICTURES IS EXACTLY WHAT YOU WILL RECEIVE ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL NON FREIGHT ITEMS WILL BE SHIPPED WITHIN 1 BUSINESS DAY UPON RECEIPT OF PAYMENT. UNLESS OTHERWISE ... moreNOTED ALL FREIGHT ITEMS WILL BE SHIPPED WITHIN 3 BUSINESS DAYS RETURNS ARE SUBJECT TO A CASE BY CASE BASIS AND MUST BE WITHIN 7 DAYS OF RECEIVING THE SHIPMENT NEW YORK RESIDENTS ARE SUBJECT TO PAY 8.75% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE DON’T HESITATE TO ASK BEFORE THE END OF THE LISTING* THANKS– BUFFALO VINTAGE: Payment and Shipping Payment is expected with in 5 days of Auction end. We accept PayPal as well as more conventional options. We ship the next business day after payment is received. All our books are carefully packaged to avoid damage in transit and are shipped with delivery confirmation. Most items are shipped via USPS Media Mail but we also offer Priority Mail service. We will combine shipping when possible. inkfrog terapeak. InkFrog Analytics.
|
|
|
1200# energy class for 11.000# to 19,000# 1,120 lbs. 17-30 GPM range, 1700-2150 PSI range, switch hitch mounting option, includes: hammer, jumper hoses, point tool, assembled and ready to install on your machine Fits rubber tire backhoe.Also fits mid size excavator Item is on a pallet and we have a forklift to load it with. Shipping is the buyers responsabilty item is for local pick up in Pahrump Nv
|
|
|
Up for auction is 1 Hilti B 36/2.4 LiIon battery 36 Volts 2.4 Ah Used and will not take a charge. One of the LED's on display lights up. Use with the TE6-A36. WSR 36-A
|
|
1 lot of 2 BEREMA ATLAS 90cc 2 cycle gas powered jack hammers. The better looking unit starts and runs. And has a new primer bulb. The other unit has a good engine, as it started and ran for a few seconds with throat fuel. Missing some nuts and bolts, and it doesn't have a starter recoil. NO bits included, just the 2 jackhammers you see in the pictures. Searching the internet told me that the FB60 Super model has a 90 cc engine, and these are definitely 2 cycle engines. Made in Sweden, and from what I found, NEW price on these was just under $4000 EACH! So this will be a great deal for someone that needs these. Unfortunately I cannot offer a blanket shipping quote. This listing is for local pickup only. However if you have a uShipper or other freight contractor that will come and pickup, ... morecall me and I will work with you on that. Using FedEx or UPS is impossible, as these units are 55 lbs each, and the shipping cost would be very expensive, BUT IF you have an account with Fed Ex, contact them, show them these pictures, and if they will allowing shipping on these WITHOUT having to be boxed, then I will indeed consider that. Fed Ex seems like they will ship certain heavy items without being boxed. These hammers would be much easier to pick up and move around by the handles anyway. Being in a box would just make it harder. My guess is that they wont, given that these are gas powered items. Any questions. Call or text 813-453-5723, thanks for looking and please check my other listings. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-147679c30f5-0x110-
|
|
|
Hello! This listing is for an Electric Brute Bosch Jackhammer model number 601111304139. This item is Used but in Excellent Condition. It comes with a Black. Rolling cart& 4 Bits for attachments. If you look at the pictures you will see that this Jackhammer has been well maintained and cared for: the Vents are Clean the Collar& Inlet Shaft rotate just right for a Bit to fit snugly in place, and the bits are freshly sharpened to ensure accuracy for the perfect break. This item ships via FREIGHT given its weight of 115 lbs. However. If you prefer a different method of shipping we will be more than happy to work with you to find you the most ideal rate. Please feel free to call for a quote or to ask any questions. We thank you for taking a look! Check out our Store too!
|
|
Hilti TE700-AVR Demo Breaker Hammer w/Case You are bidding on a used but running strong and ready for work Hilti model number TE700-AVR demolition breaker with a 10.8 amp motor that operates at 2.760 ipm, uses SDS max bits and includes a handle, manual, 2 chisels, a moil point and a carrying case. The winning bidder pays shipping, and be sure to see my other auctions for more tools! K771 I DO NOT SHIP OUTSIDE OF THE USA Please do not hesitate to bid if you think you might want the above item'cause I have made sure that it is what I say it is but I don't know everything so just in case I missed something I give a 3 Day Return notice(I know you can't get it back that quick but please notify me if there are any problems) for a full refund(less shipping fees) on anything I sell on ... moreEbay. Unless otherwise noted. Please if you any questions. Ask them before the close of the auction. So bid with confidence. All auctions must be paid for within 10 days. I have had a lot of no shows with the money lately, so I will be sending a second email after five days then a Non-Paying Bidder Alert after the 10 days. I don't like to be so strict but it costs me time and money to place the items on Ebay and would like to ship as soon as possible. It's also nice to have the money in the bank so I can go and buy more neat stuff to sell. PLEASE Note shipping charges are calculated USPS rates, my normal $2.00 handling fee plus now all items are shipped with insurance included at no charge. But"If it fits It ships" any item that we can fit into a flat rate box(if the total is cheaper) we will ship that way. Any overpayment will be refunded the day of shipping. NOTICE I am No Longer Shipping Outside of The USA-Too many problems(payment/delivery) And the last thing. If the listing above does not say that an item has a box, paperwork or extra pieces, don't expect it. Normally it's what you see is what you get unless stated in the listing. Thanks again, Chris. I do not send 2nd chance requests nor ask for p
|
|
|
Hydraulic Rock and Concrete Splitter Box Pump. Ships without hydraulic fluid in pump making it lighter and no possible leaking for shipping purposes. Reasonable Best offer considered. Never tested so not sure if it works or not. Selling as is and no returns accepted. $300.00 Shipping flat rate for USA and Canada. Except Hawaii and Alaska higher shipping rate will apply.
|
|
HI. THIS NO RESERVE AUCTION IS FOR A: 1240W C.M.T Electric Demolition Jack Hammer Concrete Breaker Punch w/ Case: This tool is in good condition with light scratch and scuff marks. Please note that the storage case does show wear from being in storage. PLEASE LOOK AT ALL PICTURE TO VERIFY) It has been tested and works great! Comes with Green Metal storage case. Thank you and Good Luck! The shipping cost will be $35.89 due to the weight of the Jack Hammer. It will be securley packaged for safe shipping! Please note that the items in the pictures are the only items in the auction. If it is not in the pictures. Then it is not in the auction. Thank you. PLEASE LOOK AT ALL THE PICTURES* ~~~~~~~~ SHIPPING IS $35.89 FedEx Ground~~~~~~~~ We ship only to locations in the continental United States. ... more100% GUARANTEED! I am not a professional with these items. But I will describe them honestly and to the best of my knowledge. If by chance there is a problem, please email me first so I can try to make it right. I am easy to deal with and have bought and sold thousands of items over the years so I do understand both sides of ebay. Please email me with any questions that you might have before bidding, I will be happy to answer them, normally with in 24 hours. You can call me directly@ 1-520-977-6896, Mike
|
|
I HAVE A HILTI TE 3000AVR 120V BRUSHLESS BREAKER WITH DETACHABLE CORD. It is in excellent condition with minimal scratches and scuffs. WE BOUGHT IT ON 2013 FOR A CONSTRUCTION PROJECT. Used it ABOUT 5 TIMES FOR ABOUT 1 HOUR EACH TIME TO CHIP CONCRETE with Pointed bits. PAID OVER 3500$ AND IT WAS WORTH IT. THIS HILTI TE 3000 AVR IS A MONSTER POWERHOUSE. ONLY REASON WE ARE SELLING IS BECAUSE WE FINISHED THE JOB AND NEED TO DOWNSIZE. WHAT YOU SEE ON PHOTOS IS WHAT YOU GET. 1-NEW SPADE 1-NEW HILTI 4" FLAT SELF SHARPENING BIT 1-USED HILTI POLYGON SELF SHARPENNING POINTED BIT 1-USED POINTED BIT. CART WILL ALSO GET INCLUDED. Bid and BUY WITH CONFIDENCE. LOOK AT MY FEEDBACK. PLEASE SERIOUS BIDDERS AND I SHIP TO BUSINESS LOCATIONS ONLY*READ READ-NO RESERVE-NO RESERVE- WOW WE LIVE ONCE. LETS ENJOY ... moreLIFE BY WORKING AND MAKING MONEY WITH THE BEST TOOLS ON EARTH. HILTI. YOU WILL NOT BE DISAPPOINTED.
|
|
American Pneumatic Chipping Hammer 653 Up for auction is this American Pneumatic Air Chipping Hammer model 653. And this American Pneumatic Chipping Hammer is used with cosmetic scratches and chipped paint from previous use, everything works as it should see images for details. This American Pneumatic Chipping Hammer comes with a used chisel and air hose. This American Pneumatic Chipping Hammer is used for scaling. Chiseling, removing concrete build-up from side of mixers, light concrete demolition and cement finishing, form stripping, etc. Features: Flapper valve design allows dirt to pass without stopping tool. Deep case-hardened alloy steel cylinders. Drop-forged handles. replaceable bushing. Adjustable exhaust deflector. Choice of optional retainers including the APT latch-type. Please ... moreallow up to three days handling time for all items to be shipped. I will combine shipping cost for anyone who purchases multiple items and wishes to save on shipping costs. Just send an email if you intend to purchase multiple items and would like them combined. If there are any questions concerning the items up for auction please feel free to ask before auction end and I will do my best to respond in a timely manner. Customer satisfaction is important to me so if there are any concerns please contact me and I will do my best to satisfy any problems that may have come about. If the buyer feels the item shows up not as described I will issue a full refund and pay for return shipping. All other returns, the buyer will be responsible for paying return shipping. Depending upon convenience I will allow some items to be picked up locally. Before leaving negative feedback please contact me with any concerns and we can work together to try and save any transaction and make sure all parties involved win. Thank you and good luck to all bidders.
|
|
USED: INGERSOLL-RAND Promaxx Jackhammer JX35 Produced by INGERSOLL-RAND Co. 1998 Manufacture Date Model# JX35 Comes with INGERSOLL-RAND Promaxx Jackhammer JX35 and full manual including full Parts List and Repair Manual. Made in: England. U.K. 7500-Shadwell Drive P:MAX.6.1 BAR(90 PSI) Should you have questions. Please contact Greg at(386) 615-7671 or call(386) 212-6398. You are bidding on a used item. Please be sure to ask any or all questions prior to bidding. SOLD As Is/Where Is. INGERSOLL-RAND Promaxx Jackhammer JX35 is fully functional. SHIPPING Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the Greg(386) 212-6398 for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight ... moreshipments may take longer due to palletizing and scheduling. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in transit. Palletizing charge of $75.00 USD if required; Crating charge of $250.00 USD if required for National and International Shipments. Local Pickup is always welcome! No handling fees for Local Pickup. Any item not picked up within 30 days from End of Auction. Will be charged 10% of items cost per month for storage.
|
|
|
HELLO UP FOR SALE ARE 38 PCS OF AIR COMPRESSOR JACK HAMMER BITS IN VARIOUS SIZES AND SHAPES. POINTED/ FLAT/ ETC. THESE ARE USED AND SOME ARE LIKE NEW USED VERY LITTLE. THIS IS AN AS IS SALE. MY NAME IS PASQUALE AND YOU CAN CONTACT ME AT 646 852 2675. EITHER BUYER CAN DO LOCAL PICK-UP OR I CAN SHIP THE CHISELS.
|
|
Milwaukee Heavy Duty 15 Lb SDS Max Demolition Hammer 5446-21 Looks and works great! Come with 360 side handle. Grease, and carry case. Bidding starts at 99¢ with No Reserve! Please ask any questions you have about this item before placing your bid. Pictures shown are of the exact item for auction. U.S. shipping only to lower 48. We ship Monday thru Friday. In most instances we ship within 24 hours of payment. If your payment is received after 1pm on Friday we will ship on Monday. Payment must be received within 3 days of auction end. Returns are only accepted if the item is not as described. You are responsible for return shipping. Shipping may be refunded on a conditional basis. Please let us know asap if there is any problem with the item. We stand behind what we sell and will do whatever ... morewe can to make sure you are satisfied with your purchase. We do not offer partial refunds. For our security. We photograph and record all serial numbers. Please contact us through ebay messaging. We try to respond within 24 hours of your question during normal business hours M-F. If there is a problem or concern about your purchase. Before leaving any neutral or negative feedback, please contact us through ebay messaging first so that we may offer a resolution and ensure that you are 100% satisfied. Great customer service is the foundation of my business. Thank you and happy bidding!
|
|
|
I retired in 2006 and put all my tools into storage. This is pretty much the end of all the pneumatic tools i have been listing over the last few weeks. I cannot read any markings on this one and cosmetically it is not too pretty. I put this in storage in working order 8 years ago. i am selling as is. and starting low because i have no way to test it anymore. I believe it is an atlas copco smaller model. you receive what is in the picture including the oiler. please wait for an invoice at end of auction. so i can charge correct shipping. thank you.
|
|
|
WE BOUGHT THIS BRUSHLESS HILTI TE 1000 AVR FOR A SMALL HOUSE PROJECT AND WOULD USE IT ON AN OFF. IT IS IN EXCELLENT WORKING CONDITION. MADE IN LIECHTENSTEIN. HEAVY DUTY AND VERY POWERFUL. IT HAS BUTTON THAT REDUCES POWER BY 50% FOR PRECISE CHIPPING. HANDLE AND CASE WILL ALSO GET INCLUDED. I WILL INCLUDE* 2-HILTI SELF S HARPENNING BITS( FLAT AND POINTED) 1-new. Pair of large maxiflex gloves* free Knipex Mini Bolt cutter 71 01 200. This hilti te 1000AVR is designed for the CONSTRUCTION PROFESSIONAL. PLUMBERS ELECTRICIANS-CARPENTERS OR SIMPLY HOME OWNERS. BUY WITH CONFIDENCE. CHECK MY FEEDBACK. THANKS FOR LOOKING
|
|
Up for auction Hilti TE 706 Hammer Drill Chipping Gun Demolition Hammer Here we have this used Hilti hammer for your inspection It is in good clean shape with no damage or wear aside from light cosmetic wear and tear. Runs strong and smooth. Comes just as shown here drill only. In case. Please refer to pictures and information below for more detail. If you have any questions email us before bidding. We stand behind everything we sell 100% Please contact us before leaving feedback if your purchase was anything less than expected. We will do our utmost to insure your satisfaction. Happy bidding! More power and more concrete removal per minute than the TE 705 Three power regulation settings for maximum versatility Virtually no loss of power. Even during voltage fluctuations New SR brushless motor ... moreeliminates the need to replace carbon brushes Lightweight design for chiseling in various positions and in almost any direction. Policies: Our ebay operation is closed on Sundays and Mondays. All questions from the off time will be answered on the next business day. Tuesday. All Shipping and invoicing will resume on Tuesday as well. We ship from Tuesday thru Friday only(excluding holidays) Thank you very much for your understanding. Payment: We gladly accept Paypal. For other payment options please contact us through here. Or if you wish to speak with us please call within our ebay business hours Tue-Sat 10am-6pm PST. Our number is(831) 768-7296. All California state sales will be added a 8.25% tax to the final value. Shipping: We will gladly combine shipping on multiple items won. Insurance is already included in all of our shipping charges and quotes. Buyers from Puerto Rico. Hawaii and Alaska may have additonal charges depending on size of shipped item, please inquire for an accurate shipping quote. We ship internationally as well. International buyers please contact us for exact shipping quote if it is not listed in the auction. As charges vary greatly to other countries. In any event, we are not responsible for t
|
|
HELLO. YOU ARE BIDDING ON A USED BOSCH®# 11388; SDS-max Demolition Hammer. THIS ITEM IS USED IN THE HD KIT BOX AND INCLUDES 2 CHISEL BITS. THIS IS NOT A RECONDITIONED MODEL. COSMETICALLY THIS TOOL IS EXCELLENT CONDITION FOR A USED DEMOLITION HAMMER. THE EXTERIOR HAS SOME MINOR SCRATCHES AND SCUFFS WHICH IS TYPICAL FOR THIS TYPE OF TOOL. PLUS IT IS ALL MINOR COSMETIC ITEMS. I HAVE PERSONALLY TESTED THIS DEMOLITION HAMMER AND IT IS IN EXCELLENT WORKING CONDITION. THE PHOTOS IN THE GALLERY OF THIS AUCTION ARE OF THE EXACT ITEM THAT IS BEING SOLD; THEY ARE NOT COPIED FROM THE MANUFACTURER’S WEBSITE. PHOTOS OF A SIMILAR ITEM OR E-BAY’S STANDARD PHOTO. THEY ARE THE EXACT ITEMS THAT ARE OFFERED IN THIS LISTING FOR SALE. WE USE MORE PHOTOS THAN NECESSARY SO YOU WILL KNOW THE EXACTLY WHAT YOUR ... moreBIDDING ON; SO THERE ARE NO SURPRISES! EVERYTHING THAT IS INCLUDED IN THIS AUCTION IS SHOWN IN THE PHOTO GALLERY. IF YOU DON’T SEE IT IN THE PHOTO GALLERY THEN IT IS NOT PART OF THIS AUCTION. PLEASE LOOK AT ALL OF THE PHOTOS CLOSELY TO AVOID ANY CONFUSION. MANUFACTURERS CHANGE THEIR FEATURES& SPECIFICATIONS WITHOUT NOTICE; SOME FEATURES MAY INCLUDE OPTIONAL ITEMS THAT ARE NOT ALWAYS IN OUR AUCTIONS. WE DO OUR BEST TO KEEP OUR DESCRIPTIONS AS ACCURATE AS HUMANLY POSSIBLE. THANK YOU! We strive to make every transaction a 5-Star experience in all categories. If you have any questions or comments please contact us before leaving feedback. If you would prefer. You can call us at(305) 685-9663. We normally respond within 24-hours or the next business day on Holidays or Weekends. INCLUDES: SDS-max® Demolition Hammer Model 11388 360° Auxiliary Handle Heavy Duty Case Box 2 SDS-max Chisel Bits BOSCH 11388 SDS-max® Demolition Hammer The Bosch Difference· The World's Best Selling Hammers. Constant Response™ Circuitry provides soft-start. Constant speed under load and overload protection· Professional drilling speed and longer run time· Bosch.Home of the Bulldog Rotary Hammer The Bosch 11388 SDS-Max dem
|
|
|
MILWAUKEE 5332. 3/4" HEX DEMOLITION HAMMER WITH CASE AND BITS MISSING THE IDLE GEAR ONLY THE MILWAUKEE JACK HAMMER WILL WORK GREAT ONCE THE IDLE GEAR IS REPLACED.EVERYTHING ELSE WORKS FIND. SOLD AS IS. PICK-UP OR SEND INFO FOR S&H QUOTE. IF SOMEONE HAS A IDLE GEAR FOR SALE PLEASE CONTACT ME: dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14777c9a5fc-0x113-
|
|
Hilti Model 1000-AVR Demolition Hammer You are bidding on a Hilti Model 1000-AVR 120-Volt Demolition Hammer(Jack Hammer) We Will Not Ship This Item* This Item Must Be Picked Up* Good Used Condition Fair amount of Normal Wear& Tear Tested Excellent Working Condition Everything pictured is what is in the auction. NO SHIPPING. PICKUP ONLY* We accept PayPal. Payment by checks(which are held for a 10 day period before items are released) also accepted. We will ship 2 business day(Monday- Friday) after cleared Payment. Maryland residents and customers picking items up in person add 6% sales tax. If you have any questions. Please email them to us before winning the auction. We are happy to help you with any questions you may have on any of our items up for auction. Northwestern Loan Company, ... moreone of Maryland's oldest and largest pawn shops, has been under the same family ownership at the same location since 1919. We are located at 1701 Pennsylvania Avenue, Baltimore, Maryland 21217. Our phone number is(410) 669-5454. 341215*We Will Not Ship This Item* This Item Must Be Picked Up*
|
|
|
Up for auction is this Hilti TE 706 Demolition Hammer breaker tool used for PARTS or REPAIR not working. Red light comes on but that is it. Looks to be complete nothing missing for Parts or Repair. What you see is what you will receive.
|
|
|
Wacker Neuson Model: EHB7M Breaker Hammer Drill Version 100 120 Volts 14 Amps 1300 Watt 60 Hz Great Condition! Comes With Case. High-Performance Grease, 1/2" Rock Hard 13inch Bit JHHM-300A 5/8" Rock Hard 13inch Bit JHHM-300 Date: 12/2011
|
|
TEX 140PS US Pneumatic Breaker Description: TEX 140PS US Pneumatic Breaker-Standard 1 x 4-1/4" Shank The latest TEX series is a marriage of the best and most useful features. Characteristics and performance of the breaker range it replaces, and a number of new, but well-proven features such as Atlas Copco's solid body concept and the two-step trigger, SOFSTART. Solid body concept.The solid housing design contains fewer parts- and that means greater reliability. It also allows for fast and exceptionally easy on-site service- a few basic tools are all you need. UNIT COMES JUST AS PICTURED Please feel free to contact me for all you Rigging and Welding needs and I can list any items we have that you might need. Nick 864-230-2843 ext 251 For other great deals on Construction Surplus items, ... morePlease check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. Please note that we only ship Monday through Friday 8am-2 pm EST(Eastern Standard Time) Any orders places or paid for after this time WILL NOT be shipped out that day. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14
|
|
|
For sale one Ingersoll Rand Brand Chipping Hammer Model Size 3. Auction includes Size 3 chipping hammer with 5 bits pictured nothing more. Hammer is in very good looking condition. Tool is in correct working condition. Shipping is $25.00 only for 50 USA States. Auction comes with a 14 day warranty minus any shipping fees to send back. Paypal payment only. Thank you.
|
|
BIDDING ON A USED Berema Atlas FB60-S Gasoline Jack Hammer Breaker W/ Cart and 2 Bits*RUNS GREAT* GOOD LUCK AND HAPPY BIDDING.Check out my other items!Be sure to add me to your favorites list! DUE TO NON PAYING BIDDERS IF YOU HAVE A FEEDBACK SCORE OF 10 OR BELOW PLEASE CONTACT US BEFORE BIDDING.IF YOU DO NOT CONTACT US WE WILL CANCEL YOUR BID. LOCAL PICK UP WELCOMED-THERE IS NO CHARGE FOR LOCAL PICK ON ANY ITEM. WE ONLY SHIP TO THE LOWER 48 STATES. ACCEPT PAYPAL OR M.O.PLEASE INCLUDE YOUR PHONE NUMBER FOR THE SHIPPER.FIXED RATES ARE FOR THE LOWER 48 STATES ONLY. AS ALWAYS IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WILL GIVE FULL REFUND AS SOON AS ITEM RETURNED.BUYER PAYS RETURN SHIPPING. BUYER MUST HAVE ITEM PAID IN FULL 2 DAYS AFTER AUCTIONS END.IF YOU HAVE A PROBLEM LET ME KNOW.ALL ... moreSALES CONSIDERED FINAL 5 DAYS AFTER DELIVERY DATE.LOCAL PICK UP WELCOME ON ANY ITEM.WE ARE LOCATED AT 2704 FREEDOM DR IN CHARLOTTE.OPEN 9-5.PHONE IS 704 392-8244.ONE MORE NOTE.I DO SELL RETAIL IN CHARLOTTE.IF THERE ARE NO BIDS ON AN EBAY ITEM I RESERVE THE RIGHT TO SELL THAT ITEM LOCALLY AND END AUCTION.IF THERE IS ONE BID ON AN EBAY ITEM AUCTION WILL BE COMPLETED.I HOPE THIS EXPLAINS ANY CONFUSION ON WHY SOME ITEMS ARE PULLED OFF MY AUCTIONS.I WANT TO BE FAIR BOTH TO MY EBAY CUSTOMERS AND MY LOCAL BUYERS.
|
|
|
AS IS BOX HAMMER BITS AND OTHER PIECES NOT EVEN SURE IF THEY GO TOGETHER.NOT SURE IF WORKS OLD JACK HAMMER LOCAL PICK UP ONLY. PAYPAL OR GREEN PAPER ONLY.
|
|
|
Item tested- works good. Case is missing both latches& 1 wheel. JM-771-T2-5. Demolition Hammer ZIG 16-30. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Chicago Pneumatic Pavement Breaker 60 lbs Jackhammer Demolition Hammer Used. Excellent working condition. Color: Red 1 1/8" Weight: 75 lbs Thanks for Looking! Customer Service We are here to answer any questions you have and to assist you in your concerns. Please contact us prior to leaving us a neutral or negative feedback. We pride ourselves in having a personal touch with all of our customers and always want to leave you 100% satisfied. If you do not receive a prompt response. Please note that we are in the office Mon-Fri 7am-5pm EST. Responses may be slower during weekends and holidays. Positive feedback is left automatically& immediately upon receiving the same. Payment and Shipping We accept all methods of payment. Payment is due within 3 days of auction ending. Your item will ... morebe shipped usually within 1-2 business days upon receiving payment. We ship using UPS Ground or USPS Priority. If you choose to do local pick up. Sale is subject to 8.875% New York sales tax. Bid with confidence and thanks for checking us out!
|
|
L1 THIS LISTING IS FOR PRE-OWNED MAKITA ROTARY HAMMER DRILL W/CASE AND TOTAL OF 11 USED BITS& CHISELS. AND ONE USED SAFETY EYEGLASS ANSI-582 DRILL BIT 5/8'X 17.3/4'end to end ANSI-391 DRILL BIT 3/4'X 12' end to end makita drill bit 1/2'x 6.1/4' end to end makita drill bit 3/8'x 6.1/4' end to end makita drill bit 5/16'x 6.1/4' end to end makita drill bit 1/4'x 6.1/4' end to end makita drill bit 3/16'x 4.1/4' end to end CHISEL 1.1/2'X10.1/4' end to end CHISEL 3/4'X 9.1/4' end to end POINT CHISEL 1/2'X 9.5/8' end to end 6PIONT ROD 1/4'X 8.5/8' end to end Here some Specifications and more info found from the internet about this item. please see blow) The Makita™ HR2455 1" D-handle SDS-Plus 3-mode Rotary ... moreHammer allows you to chose between using the hammer in rotation mode. Hammering with rotation mode or hammering mode only, so you can match the functionality of the hammer drill to your task. Makita HR2455 1" Rotary Hammer Drill Powerful 7.0 AMP motor and lightweight. 6.2 lbs. Lighter and more powerful than any hammer in its class 2X faster drilling with synchronized RPM and BPM Chisel Rotates 360 degrees with 40 different locking positions 3-mode operation. rotation only, hammering with rotation, or"hammering only" Positive bit lock ensures that the bit is securely fastened Variable speed for complete drilling and hammering control. Reversible One-touch sliding chuck for easy bit changes. Accepts SDS-Plus bits Built-in torque limiter helps prevents kickback when hitting reinforcements Recessed lock-on button for continuous use Large trigger switch and 360° swivel side handle for added comfort Ergonomic. Well balanced design features a rubberized D-handle grip for greater stability, comfort and control with reduced operator fatique Ideal for anchor setters. Sign hangers, installers, electricians, plumbers and masons Capacity- Wood: 1-1/ Capacity- Steel: 1/2" Capacity- Concrete(with core bits) 1&quo
|
|
APT 60 lb Pavement Breaker Demolition Hammer Used. Excellent working condition. Color: Red 1 1/8" Weight: 75 lbs Thanks for Looking! Customer Service We are here to answer any questions you have and to assist you in your concerns. Please contact us prior to leaving us a neutral or negative feedback. We pride ourselves in having a personal touch with all of our customers and always want to leave you 100% satisfied. If you do not receive a prompt response. Please note that we are in the office Mon-Fri 7am-5pm EST. Responses may be slower during weekends and holidays. Positive feedback is left automatically& immediately upon receiving the same. Payment and Shipping We accept all methods of payment. Payment is due within 3 days of auction ending. Your item will be shipped usually within ... more1-2 business days upon receiving payment. We ship using UPS Ground or USPS Priority. If you choose to do local pick up. Sale is subject to 8.875% New York sales tax. Bid with confidence and thanks for checking us out!
|
|
|
Used but in excellent working condition BOSCHHAMMER GSH-16 PRO: Highest material removal rate due to 41 J single impact force and 1750 watts motor power•Longest lifetime due to robust design and use of high-quality materials•Vibration Control for reduction of harmful vibration and. Therefore, longer operating time and greater ease of use•Excellent handling thanks to the large handle•The on/off switch is perfectly positioned, which prevents the tool from being switched off unintentionally TECHNICAL DETAILS: RATED POWER INPUT: 1750 WATTS•MAX IMPACT ENERGY: 41 J•1300 BPM•28 mm HEXAGONAL TOOL HOLDER a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-147871894f7-0x10e-
|
|
|
Item is an Amazon return and has been tested. The item works as it should and has 5 speed controls. There is no manual with the tool. The case is included and it does have wheels for easy transport. But has some slight damage near the latch. The latch works, but the case has a tear in the plastic where the latch snaps to it. The item is being sold as local PICKUP only. If at pickup, buyer is unsatisfied for any reason, money will be refunded. Sold as is after buyer leaves with the item. Please take a look at the photos. Thanks for the look and the bid. Posted with
|
|
|
You are bidding on a C ompletely Rebuilt Horizontal Rock Drill by Chicago Pneumatic + one bit. This drill is great for drilling rock and concrete walls as well as underwater wood piling work. You can use an adapter with this tool to convert it to use SDS bits also which is sold seperately! This tool spins and hammers at the same time. Model: CP-9 BPM: 3400 Piston Diameter: 1 1/4" Piston Stroke: 1 3/8" Length: 14 3/4" Air Inlet: 3/8" NPT Average Air Consumption: 20 Cfm Visit My eBay Store: eairtool_1 Powered by
|
|
NEW TEMPLATE DESCRIPTION Milwaukee M12 Fuel 2416-20 Cordless 5/8" SDS Plus Rotary Hammer Drill Kit WHAT'S INCLUDED* Hammer with 2 Batteries. Charger, Handle and Case(As pictured above) Do not assume anything that is not listed in description or not pictured in the photos. WHAT YOU SEE IN THE PICTURE(S) ABOVE IS WHAT YOU WILL GET. CONDITION Used- with scuffs and stains. Guaranteed to arrive in Good Working Order. RETURNS Returns accepted within 14 days of purchase if item received in NOT AS DESCRIBED condition. Buyer pays return shipping. MUST BE RETURNED IN ORIGINAL CONDITION* PAYMENT We accept PayPal only. Immediate Payment required. SHIPPING Continental US Buyers: FREE Shipping to PayPal Confirmed Address ONLY. Hawaii. Alaska, Puerto Rico, Guam Buyers: NOT AVAILABLE International ... moreBuyers: We utilize Ebay's Global Shipping Program. The Package shipped to a parcel processing facility located in the United States. Where a third party global technology and shipping provider will oversee the processing, customs clearance, and international shipment of the item to the buyer. Buyers will pre-pay all applicable shipping and import charges during checkout. PLEASE NOTE: WE ONLY LIABLE FOR THE PACKAGE UNTIL IT REACHES PARCEL PROCESSING FACILITY IN KENTUCKY. THE REST OF THE JOURNEY IS EBAY'S RESPONSIBILITY. ©1998-2014 Star City Merchandising. All Rights Reserved.
|
|
|
Here is a used CP Chicago Pneumatic Air Chipping Demolition Hammer Tool Part Number#CP-9362 Tool is in good working condition. Personally tested and works. See pictures. Buy it now for $149.00 or make an offer!
|
|
|
Here is a used IR Ingersoll-Rand Demolition Air Chipping Hammer Tool Tool is a Size 4 Tool is in good working condition. Personally tested and works. See pictures. Buy it now for $149.00 or make an offer!
|
|
|
The auction is what you see in the picture. Good working condition. We only used a few times. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1478ea3ee8c-0x111-
|
|
This Listing is For Hilti Breaker Hammer Model: TE1000 AVR Description: Used Condition Working Properly Please Review Pictures Sku: 1100000005281 COMBINED SHIPPING: DOMESTIC COMBINED SHIPPING ALL Domestic orders will have free shipping INTERNATIONAL COMBINED SHIPPING We offer combined shipping on ALL International orders! Combined shipping will be adjusted through the invoice after all items have ended. Once all items you wish to purchase have ended please either contact us via message OR request total on order BEFORE paying. COMBINED SHIPPING QUOTES For an accurate combined shipping quote please contact us. Provide us with a list of the items you wish to purchase, provide us with your Zip Code, and we will send a custom quote. Adding or removing an item to an order will change the quote. ... moreAS- IS ITEMS* ALL ITEMS THAT ARE SOLD"AS-IS" DO NOT QUALIFY FOR REFUNDS OR RETURNS. AS-IS ITEMS ARE SOLD WITH KNOWN PROBLEMS INCLUDING(BUT NOT LIMITED TO) ITEMS THAT ARE NON-FUNCTIONAL. PARTIALLY NON-FUNCTIONAL, OR ITEMS THAT HAVE NOT BEEN TESTED. WE DO OUR BEST TO DISCLOSE ANY PROBLEM OR DEFECTS WITH AN ITEM BUT THERE MAY BE MORE ISSUES THAN THOSE STATED IN THE DESCRIPTION. BIDDERS SHOULD NOT ASSUME AN AS-IS ITEM IS IN WORKING CONDITION. WE WILL ALWAYS DISCLOSE IF AN ITEMS IS TESTED, WORKING, FLAWED, OR AS IS. BIDDERS MUST ASK ALL QUESTIONS BEFORE THE AUCTION ENDS AND NOT ASSUME ANYTHING THAT IS NOT STATED. ALL AS-IS ITEMS ARE SOLD ONLY WITH WHAT IS PICTURED AND AS PICTURED. If there is ever any issue with your item. Please contact us. We always do our best to take care of our customers. ALL AS IS items are sold AS IS. Please read the description very carefully and make a conscious decision when buying AS IS items. For all other items, if there is any issue at all, please contact us and we will offer a replacement, refund, or whatever is needed to ensure a positive transaction. We strive to sell quality products at quality prices. We never attempt to sell anything that is different than what is described. Please conta
|
|
|
HILTI TOOL CASE For the Hilti Hammer: TE 905. Case is in proper. Solid functioning condition. All latches are good. All inner plastic is good and strong and intact. Normal wear and tear. Sale is for CASE ONLY. As pictured- nothing else included. Be sure to compare which shipping service is cheaper. There are two options. Only paypal accepted for payment. Shipping to USA only. Thanks for looking. No returns unless item has been misrepresented.
|
|
This is used HILTI TE-1500 jack hammer demolition breaker kit. Come as pictures, was used once only and all in perfect cosmetic& fully functional condition, come with hammer, side handle, grease tube, new in bag of the safety glasses, two flat chisel the one of TE-SP FM36 narrow chisel#406770 and one of TE-SPM 5/36 wide chisel#406773 and the case included also, all was used once only and in perfect new cosmetic& fully functional condition except that has few minor wears on it only, buyer with satisfaction or return to refund, international shipping welcome but not for all country because may over size or weight limited with some country, he parts#3455943 and the price listed $2,249 plus tax& s/h extra when new purchasing but more less then THE BUY IT NOW AT $1699 ONLY HERE OR YOU ... moreBEST OFFER MAY ACCEPTED Item#3455943. Package Quantity 1 pc, Package Contents: 1x TE 1500-AVR 120V Breaker grounded, 3x Dust shield, 1x Kit box TE 1500-AVR, 1x wide flat chisel TE-SPM 5/36, 1x Narrow-flat chisel TE-SP FM 36, Price: $2.249.00/ 1 Each Order Quantity: Complete the System Find all related products here: Rated input power 1800 W, Max. chiseling performance 539 in³/min, Rated voltage 120 V, Full hammering frequency 1620 impacts/minute, Single impact energy 22 ft-lbs, Weight according EPTA-Procedure 01/2003 31.3 lb. A-weighted emission sound pressure level 89 dB(A) 1 Reduced impact energy No, Dust removal module TE DRS-B(optional) Triaxial vibration for chiseling into concrete 12 m/s² 2
|
|
|
For auction is a Makita HM1100C Demolition Hammer. Has scratches/scuffs from use. Please see pictures. Please Read Before Bidding! If an item is not working/functioning properly. Please just send me an email. I gladly accept returns. CA residents will be charged sales tax because I have to. No shipping outside US, No Exceptions. All items are used unless otherwise stated. If there isÌùñ kind of problem with an item/transaction, please email through ebay messages and I will resolve it as soon as possible. We strive for 100% cutomer service and satisfaction. Thanks.
|
|
Description Tested& Works No Bit One Clip on case is missing. Item(s) looks to have been used or installed installed previously. Please see my other items listed for more great deals! I do combine shipping. Thanks! new customers PLEASE READ what/how I sell The items I sell range in condition from shelf pulls to store returns. Some boxes may be damaged and/or missing paperwork. I do not test the items I sell for full functionality. If the item has a plug. Most of the time it is tested for basic function and labeled about"tested and works" I do offer a 14 day no hassle return policy(see below) Please don't purchase as a brand new item and our transaction will be very smooth. If you are not sure if something is included in the auction please ask. Don't assume it is or isn't. ... moreI do my best to describe what I see accurately but If I miss something, I am only human. We can do a fast return and move on. You can see from my feedback I don't list items that are known bad. SHIPPING: Most items I do a flat rate of $8.95 for shipping for the first auction. All additional auctions are $3 each to combined shipping. For example: purchase 5 auctions and shipping will cost $20.95($8.95 + $3 + $3 + $3 +$3) All auctions must end within 7 days of each other for combined shipping and must be paid together on one invoice. Ebay will automatically update the shipping costs before you pay. All packages are shipped UPS Ground unless otherwise stated in listing. 99.9% of all my shipments are sent within 24 hours of payment. I do shipping Monday-Friday. If you pay on Friday afternoon the package will go out Monday. Delivery can take anywhere from 1-5 days depending on where you live. UPS ground does not deliver on weekends or to PO boxes. Hawaii. Alaska or Puerto Rico are excluded from $8.95 shipping. Tracking information can be found in the item details page after purchase and Ebay will email you the number once I print the label. Shipping insurance: I do insure all shipments I send out. I only shipped to the c
|
|
Demolition Jack Hammer Spade Chisel Bit 7/8" Hex 20" long This item is in GOOD working and cosmetic condition. Item shows scuffs and scratches from normal use. Please see pictures for more details. Item comes as pictured Please ask any questions before bidding Thanks for looking Payment: Paypal Payment must be made within 2 days after the end of the auction. ECheck If you plan to pay through E–Check Contact me immediately ending the auction. It can take up to 7 working day for check to clear. Shipping: I only ship to CONFIRMED addresses NO PO boxes NO exceptions. Shipping price listed is for the lower 48 states. If you live outside the Continental US contact me for shipping quotes as they will vary. Once payment is received& cleared by PayPal. The item is shipped within 1 to ... more2 business days. I do not ship on weekends unless prior arrangements are made. Local pick-up can be arranged but arrangements must be made prior to purchase and/or auction end. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return. I do my very best to describe items accurately& answer all questions to the best of my knowledge quickly. I will always try my best to make your shopping experience a pleasant one. I will leave feedback as soon as feedback is left for me! Please ASK any questions you may have before bidding on any items! Please do not assume anything. If it is not shown in the pictures or written in the description, chances are, it does not come with it! Refund: Shipping charges will NOT be refunded! No Exceptions! BUYER IS RESPONSIBLE FOR ALL return shipping costs! Thank you for your time& your business is much appreciated
|
|
|
Hilti TE 905 Electric Breaker Demolition Jack Hammer USED With BITS AND CASE. Tested working Great. Unit does have owners name on it in ink. Shipping is $35.00 it will only ship in factory case. Item can only be shipped to the United States. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1479d533424-0x109-
|
|
This hammer has been tested I actually used it for a piece of concrete slab at my house and it broke up in no time. As you may see this has been used hard but trust me when I say it works like a dream. The power cored has spots with black electric tape on it so may possibly need a new cord but works just fine as is. If there are any questions please feel free to ask. Thanks! PLEASE READ! This eBay ID is operated by(1) person. I have a business in which I buy and sell new and used items. Whether they are jewelry, coins, tools, electronics or antiques. Therefore I am not the original owner of these items. They are tested and described to the best of my knowledge. Please look at pictures and read the description carefully before bidding. I attempt to answer all questions in a timely manner. If ... moreyou have an important question please wait for a response prior to placing your bid. All Pennsylvania residents are subject to a 6% sales tax on all items. Except coins. If you have a Tax ID number please let me know. I do combine shipping on similar items. Not all the time when items are combined will shipping be cheaper. Depends on items and size of the box. Please wait for a combined invoice before paying for multiples I only accept PayPal. I ship within 24 hours of payment on 99% of the items. There will be a delay since I am not always able to ship on Thursdays. I have automatic feedback on. It leaves positive feedback for the buyer after payment and positive feedback is received. Please contact me before leaving any negative or neutral feedback if you have any issues. Thank You.
|
|
| | | | Click to close full size. Thor-Nado 5314 Electric Hammer. Make: Thor-Nado Model: 5314 Condition: Rough/Very Rough- This item is heavily used. But still works. This item will likely have heavy scratches and wear throughout as well as various other cracks/damage and cosmetic wear. Auction includes: E lectric hammer Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, Nevada, Kentucky, Indiana, and Florida buyers. We are unable to accept orders from resellers. Store | About Us | Shipping | Payment | Terms of Sale | FAQ 00176 16925.1 CD Order: 69005 About Us Bid with confidence. World class customer service is always a top priority at Cash America! Cash America Internet Sales. Inc. is an affiliate of Cash America International©, ... morea NYSE company. Affiliates of Cash America have been operating pawnshops and providing specialty financial services for more than 25 years. Cash America affiliates currently have more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, Cashland, and Prenda Fácil. Please browse through and bid on our items with confidence. By listing our items here we hope to enable the buyer to browse a virtual store with merchandise from various states, and let the deals come to you! Our most important policy is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to make sure you are happy. All items will be shipped quickly and professionally. We'd like to make the buying experience as carefree as possible and want your positive feedback. Our goal is to make sure you'd buy from us again and recommend us to friends and/or fellow eBay users. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS Priority or UPS ground for large items. Shipments
|
|
Welcome to our Auctions Please Come Back Often. We Receive& List New Items Daily. You never know what you may find! There is no reserve on this auction! This item is pre-owned. Brand: MAKITA Model: HM1304B Cosmetic condition: heavily used The item is in working condition. Item comes with original metal case& 2 bits. Shown in the pictures. Item comes without any additional accessories. Item comes exactly as shown in the pictures. Please See Pictures for Details. Thank You. This Item Comes in AS-IS(as described& shown in the pictures) condition- Please see the pictures provided in the item description. PLEASE NOTE: This item will not be shipped to Russia. Ukraine, Belarus or to any Eastern European country. Customer Satisfaction is our#1 Priority. We strive to provide you with superior ... moreshopping experience. We are located in California. Our business hours are Monday-Friday from 9:30am- 6:00pm PST& Saturday from 10:00am- 4:00 pm PST. Please be advised, that our department closed after these hours or days of operation allow us until the following business day to replay to you. We describe our items very carefully and provide plenty of pictures. Please ask us any questions you may have prior to bidding. All sales are Final& in As-Is condition. Unless we grossly misrepresent the item. Upon receipt of your merchandise. Please inspect it very carefully and let us know with in 24 hours of arrival if there are any problems or concerns. We will work with you to resolve these problems. We humbly ask you to give us an opportunity to resolve your concerns prior to you leaving a Neutral or Negative feedback. Poor seller ratings or opening any cases against us. All of these things hurt our seller standing and increase the fees we have to pay to be a seller. We love helping our customers! Attention INTERNATIONAL Bidders! Please contact us via eBay messages. Using"ask seller a question" option, to obtain a shipping quote to your country. Please be advised that in some cases we have to ship using Expres
|
|
Up for sale is a very lightly used heavy duty Chicago Pneumatic CP 60 lbs. jack hammer asphalt breaker. tool comes with a used set of(3) chisel. Point and breaker bits as well as a air hose safety lanyard. This tool has been tested and is ready to get to work. We have owned this hammer for a little under a year. It has had regular maintenance and is a fully functional tool. If you need more bits or hoses for this let me know prior to checkout and we can add or list them BIN Thank You! I list items a couple days a week and I try to respond as quickly as I can. As I'm home with my family. Thank you for your understanding and GOOD LUCK! Please email with any questions and GOOD LUCK! TERMS OF SALE(TOS) SHIPPING- We ship items to all 50 states and some international locations. Buyer shall pay ... morefreight or shipping costs based on address and packaged weight. For items sold as Local Pickup Only(LPO) buyer shall be responsible to arrange and pay all associated freight or shipping costs including crating. All LPO items are sold as-is and where-is. We will load local pickup(LP) items for free. We will not be responsible for items lost or damaged in shipping and all shipping claims must be handled by the buyer. We do combine shipping for multiple item winners. We try to ship small items within 1-5 days and heavy UPS or freight items within 4-7 days of cleared payment. Shipping transit time can take up to 2 weeks or more depending on the service selected. So please, please do not email asking if we shipped your item until said period of time has passed. PAYMENT- Payment must be made within 5 days. We accept Paypal Payments. We do file Unpaid Item Disputes on all non-paying bidders. CUSTOMER SERVICE- We make every reasonable effort to ensure customer satisfaction. But it is necessary for you to communicate with us. All Shipping and associated fees are non-refundable under any circumstance. No refunds, concessions or exchanges will be accepted after posting neutral or negative feedback. ALL correspondence must be sent
|
|
|
Makita HM0810B 11-Pound Demolition Hammer- PARTS/ REPAIR ITEM IS IN GOOD COSMETIC CONDITION- DOES NOT POWER UP DUE TO TEARS ON THE POWER CORD AS SHOWN IN PHOTOS
|
|
UP FOR SALE IS A GREAT WORKING MAKITA DEMOLITION/JACKHAMMER WITH CASE ON WHEELS. IT IS USED AND SHOWS SIGNS OF COSMETIC WEAR BUT NOTHING THAT EFFECTS HOW IT WORKS! I ALSO INCLUDED SOME BITS SO PLEASE VIEW ALLL PICTURES BEFORE BUYING! WE STRIVE FOR 5 STAR SERVICE PLEASE CONTACT US WITH ANY DETAILS BEFORE LEAVING FEEDBACK! PLEASE ADD $49 FOR INSURED SHIPPING AND HANDLING TO WINNING BID. WE SHIP VIA FEDEX AND THEY DONT SHIP TO P.O. BOXES, PAYMENT IS DUE WITHIN 7 DAYS OF OF END OF AUCTION OR WE WILL RELIST THE AUCTION AND LEAVE A NON-PAYMENT STRIKE! ALL CALIFORNIA WINNING BIDDERS ADD 9.00% TAX TO WINNING FINAL PRICE!WE DO NOT SEND SECOND CHANCE OFFERS SO IF YOU GET ONE IT IS A SCAM BY SOME OTHER USER. WE ONLY SHIP WITHING THE CONTINENTAL UNITED STATES, WE DONT SHIP TO ALASKA OR HAWAII OR PUERTO ... moreRICO.WE GUARANTEE OUR ITEMS FOR 7 DAYS AFTER RECEIVING IT.
|
|
|
HILTI TE 6-A36-AVR CORDLESS ROTARY HAMMER DRILL IN ECXELLENT RUNNING CONDITION Rotary hammer dust control pkg TE 6-A36 KIT INCLUDES: 1x TE 6-A36-AVR Cordless rotary hammer 2x B 36/3.0 Li-Ion Battery pack 1x C 4/36-350 115V Battery charger 5 Hammer drill bits 1x TE DRS-6-A Dust removal system no case
|
|
|
This tool will make you Money I will throw in a chisel so you can go right to work 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147ac474bda-0x117-
|
|
|
Pneumatic Rock Drill by Toyo Model: TY24C 50LB Class BPM: 1850 CYLINDER: 2 5/8" PISTON: 2 11/16" CFM: 98 Capacity: 1"Hex X 4 1/4" Air Inlet: 3/4" CP Fitting This tool is in excellent working condition and comes with one piece of drill steel with one bit. These drills hit i ncredibly hard! The color is misrepresented. This drill has been painted green since these photos were taken. This listing created with Images copied from eBay: Powered by
|
|
Used Working Stanley Hydraulic Underwater Breaker BR 45 Light to Medium duty underwater hydraulic breaker, Used for light concrete breaking. Small rock breaking, coral removal and rod driving, Feathering On/Off valve to control speed, Strong tie bolt design for durability, Trouble free diaphram accumulator to provide added punch and reduce recoil, TOOL BIT SIZE: 1 x 6 in. see below to order) HYDRAULIC FLOW: 7-9 gallons per minute, WEIGHT: 50 lbs, LENGTH: 25" WIDTH: 14" CONNECTION: 3/8" NPT Hose Whips, We Ship Domestic Orders Via USPS And FEDEX GRound From North Carolina. We Ship International Orders Via Priority International From North Carolina Please Be Aware There May Be Delays By Costoms And Duties Or Local Taxes Imposeed And We Are Not Responsible For Eany Costs Associated ... moreWith This Item. Return Policy 14 Days Return Policy On Doa(Dead Or Arrival Items Communication
|
|
|
YOU ARE BIDDING ON A MAKITA HM1304B DEMOLITION HAMMER. ALTHOUGH USED. ITS STILL IN GREAT WORKING CONDITION AND IS CLEAN. VERY LITTLE USE. COMES WITH MANUAL AND IN FACTORY CASE. IT IS VERY HEAVY, ALMOST 70LBS SO SHIPPING WILL BE 70$. PLEASE VIEW ALL PICTURES AND DESCRIPTION BEFORE BIDDING AS ALL ITEMS ARE SOLD AS IS. THERE ARE NO REFUNDS OR RETURNS. WHAT YOU SEE IN THE PICTURES IS THE ACTUAL ITEM(S) YOU WILL RECEIVE UPON WINNING THIS AUCTION(UNLESS STOCK PHOTO IS USED FOR DVD'S AND GAMES) PAYMENT IS DUE WITHIN 5 DAYS OF CLOSING DATE. I WILL ONLY SHIP INSIDE THE UNITED STATES. I ONLY SHIP TO THE ADDRESS THAT IS VERIFIED THROUGH EBAY. PLEASE ASK IF YOU HAVE ANY QUESTIONS. GOOD LUCK BIDDIN!
|
|
|
Overview: Make: Wacker Model: EH27 Type: Electric Hammer/ Breaker Features/Specifications: Power Source: Electric 110V- 60Hz- 15A Accepts Standard 1-1/8" x 6" breaker steel Includes cart for easy transport and storage of tools Dimensions/Weight: Actual Dimensions: L 13" x W 21" x H 41" Actual Weight(with hand cart) 91 Shipping Dimensions: L 48" x W 42" x H 15" Shipping Weight:124 lbs. Resources: For further details refer to brochure for full details Condition: Unit is in excellent working condition Good overall cosmetic condition Unit has small cosmetic hole in case- see photos Electric cord has been repaired in two places- see photos Includes handcart– see photos See photos for further detail
|
|
Up for sale we have a used Hilti TE3000-AVR Manual and protective pouch for manual or parts/Pieces. Velcro fastening. Thank You! I take pride in selling quality new& used products. I carefully inspect each item to the best of my ability to ensure listing accuracy. If you are not satisfied with your purchase. Please contact me first. Please understand I’m not a catalog and a lot of my items are used. I list items a couple days a week and I try to respond as quickly as I can. As I'm home with my family. Thank you for your understanding and GOOD LUCK! Please email with any questions and GOOD LUCK! TERMS OF SALE(TOS) SHIPPING- We ship items to all 50 states and some international locations. Buyer shall pay freight or shipping costs based on address and packaged weight. For items sold as ... moreLocal Pickup Only(LPO) buyer shall be responsible to arrange and pay all associated freight or shipping costs including crating. All LPO items are sold as-is and where-is. We will load local pickup(LP) items for free. We will not be responsible for items lost or damaged in shipping and all shipping claims must be handled by the buyer. We do combine shipping for multiple item winners. We try to ship small items within 1-5 days and heavy UPS or freight items within 4-7 days of cleared payment. Shipping transit time can take up to 2 weeks or more depending on the service selected. So please, please do not email asking if we shipped your item until said period of time has passed. PAYMENT- Payment must be made within 5 days. We accept Paypal Payments. We do file Unpaid Item Disputes on all non-paying bidders. CUSTOMER SERVICE- We make every reasonable effort to ensure customer satisfaction. But it is necessary for you to communicate with us. All Shipping and associated fees are non-refundable under any circumstance. No refunds, concessions or exchanges will be accepted after posting neutral or negative feedback. ALL correspondence must be sent via eBay due to spam filters emails outside of the eBay system will not receive a respon
|
|
Have a question? Call us! 1(323) 732-7654 7 Days a Week! 9.00AM to 5PM PST(Please Have Item Number Ready) For sale is a Bosch BoschHammer 11316EVS SDS-Max Demolition Hammer Drill with Case& 3 Bits· WORKING CONDITION OR YOUR MONEY BACK! INCLUDES 14 DAY RETURN WARRANTY! TRUSTED SELLER WITH 100% FEEDBACK! SATISFACTION GUARANTEED! But it now! Make us an offer! FREE SHIPPING! Condition: Working condition is great. Item was tested/powered on and it is fully functional. A ll the 6 settings work accordingly. Bits attach perfectly and hammer drill works powerfully! Cosmetic condition is pre-owned and it shows a few scratches/scuffs on the surface. Please view pictures in Zoom for cosmetic condition details. No broken parts, No cracks, No name markings. Please view all pictures in Zoom for ... morecosmetic details; all minor cosmetic problems have been photographed. Please Note: The auction includes what you see in the pictures and in the cosmetic condition you see in the pictures. None of our items are refurbished unless otherwise stated. Included: Bosch BoschHammer 11316EVS SDS-Max Demolition Hammer Drill· Side Handle· 3 Drill Bits· Carrying Case Please Note: No Manual. Thank you for looking! Payment& Shipping: We accept PayPal only. Item will be shipped out next day(1 day handling) of your made payment. Invoice in packages are by request only. Los Angeles local pick-up is available at our store. 7 days a week! Combined shipping is welcomed! Ask us for combined shipping discount. Unpaid Items: Communication is important to us. If you are unable to make your payment within 4 working days please contact us in order to avoid and unpaid item case/and or strike. We accept extension requests. California Customers: We charge CA tax(9% and due to eBay regulations we cannot negotiate. International Buyers: We are happy to sell our low priced goods worldwide through eBay’s Global Shipping Program. We don't charge additional handling fees and tracking number will always be provided. Please Note: Customs Impo
|
|
|
Makita HM1304B- Demolition Hammer- 35lbs Electric Corded Drill- Power Tool NR Excellent Working Used Jackhammer& 3" Spade NO RESERVE Excellent working used condition with some wear as shown. Is missing one screw on handle as shown. And has some cracks and fixed spots on cord as shown. Includes hammer and 3x13in bit as shown.
|
|
|
Drill has been used but comes in excellent condition! Plenty of life left! Has been personally tested and runs great. Comes with 4 rubberized accessories. Drill is being sold as is.
|
|
|
This is a lightly used set of HILTI power tools used in my fathers construction business he owned a few years back. The set includes a HILTI TE706AVR-The power tool is designed for medium-duty chiseling work. It is suitable for breaking/removing and demol- ishing concrete. Masonry, stone or asphalt. It is intended for use on construction sites of all kinds. a HILTI DX351- saw another one on craigslist for $250 and a HILTI TE 1000AVR- jack hammer used maybe 3 or 4 times. All three come with there original cases Valued around $2900 for highest offer.
|
|
|
Used Bosch demolition hammer. I used it last Spring to break a garage floor. Works great, comes w/ cart and 3 bits, one cart wheel may need replacement, I will include a wheel if I find one. All questions are welcome. Item sold as is. Thank you for viewing. On Aug-08-14 at 20:28:04 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
Hilti TE3000-AVR Jack Hammer Breaker 120V BRUSHLESS, Comes with the jack hammer and cart only. No bits, Very powerful tool. Gentle used. Real Good shape.Good working condition. This tool has been used as demo in the shop. Broke some concretes here and there but never been in the live job.Does shown used and normal worn. Has scratches.Nicks,dents,on the tool and on the cart from demos and moving around in the display area. Item comes as pictured You are buying the Hilty TE3000 EVR with cart only, not the other tools in the back ground 8% sell tax apply to CA residents.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-147bee6167f-0x117-
|
|
|
Stanley MB-550 concrete Hammer was mounted on a 580 backhoe and no longer have the backhoe possible to mount to a mini to mid sized excavator with not much work the dimensions between the ears 10 1/8" and 14" center of holes and 1 3/4" holes it has a moil point bit with lots of life left I can assist with shipping I can remove Bit and strap it to a standard pallet and weighs about 750Lbs I recommend getting a shipping quote from Uship for the best rates should cost $200-$400 at the most for this item If anyone has any questions please ask
|
|
|
I have AN EXCELLENT HILTI TE 905 AVR THAT LOOKS EXCELLENT AND PERFORMS GREAT. IT IS MADE IN LIECHENSTEIN. AS SOON AS YIU PAY I SHIP WHAT YOU SEE WITH 2-4HILTI BITS. CASE WILL ALSO GET INCLUDED. FAST FAST SHIPPING ANY QUESTIONS CALL ME 831 320 6467 GABRIEL I AM ALSO A PLUMBER. I LIVE IN SALINAS CALIFORNIA
|
|
|
Ingersoll Rand Pneumatic Chipping Hammer Size 2 with 4" scraper chisel
|
|
|
UP FOR AUCTION: USED HILTI TE 805 DEMOLITION HAMMER DRILL WITH. 6 ASSORTED BITS. AND CASE. WORKS GREAT, DOES HAVE NORMAL WEAR. AND TEAR. PAINT CHIPS, SCRATCHES, DIRT, ETC- THE CASE DOES HAVE 1 CLASP THAT IS BROKE.BUY AS IS, NO RETURNS. NO INTERNATIONAL SHIPPING. SHIPPING INSIDE THE U.S ONLY, PAYPAL ONLY. FORM OF PAYMENT ACCEPTED. PLEASE MAKE PAYMENT IMMEDIATLY AFTER. WINNING BID. IF PAYMENT IS NOT MADE WITHIN 3 DAYS OF WINNING BID, A. UNPAID ITEM CASE WILL BE OPENED AND THE ITEM WILL BE RELISTED. UNLESS YOU CONTACT ME AND WE AGREE UPON A LATER PAYMENT DATE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-147c99d8826-0x10e-
|
|
|
APT CLAY DIGGER DEMOLITION HAMMER. TOOL WAS TESTED AND IN GOOD WORKING CONDITION. SHIPS NEXT BUSINESS DAY THANKS FOR LOOKING
|
|
|
SULLAIR MCH-4 CHIPPING HAMMER SELLING AS IS NEEDS REPAIR. TOOL HAS AIR LEAK. NO RETURNS SHIPS NEXT BUSINESS DAY THANKS FOR LOOKING ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-147c99d89a4-0x10b-
|
|
Gardner Denver S58 Sinker Drill/ Rock Drill Used. Runs strong. Ready to work. See photos for details. Thanks for Looking! Specifications- Model, S33, S48, S55, S58 Piston Diameter, 2 3/8" 2 1/2" 2 5/8" 2 5/8" Overall Length, 21" 22" 24" 23" Total Weight, 33 3/4 lbs. 51 1/4 lbs. 59 lbs. 62 lbs. Air Hose Size, 3/4" 3/4" 3/4" or 1" 3/4" or 1" Water Hose Size, 1/2" 1/2" 1/2" 1/2" Chuck Sizes, 7/8" 7/8" and 1" 1" 1" and 1" 1/4" Shipping Weight, 41 lbs. 60 lbs. 64 lbs. 73 lbs. Customer Service We are here to answer any questions you have and to assist you in your concerns. Please contact us prior to leaving us a neutral or negative feedback. We pride ourselves in having a ... morepersonal touch with all of our customers and always want to leave you 100% satisfied. If you do not receive a prompt response. Please note that we are in the office Mon-Fri 7am-5pm EST. Responses may be slower during weekends and holidays. Positive feedback is left automatically& immediately upon receiving the same. Payment and Shipping We accept all methods of payment. Payment is due within 3 days of auction ending. Your item will be shipped usually within 1-2 business days upon receiving payment. We ship using UPS Ground or USPS Priority. If you choose to do local pick up. Sale is subject to 8.875% New York sales tax. Bid with confidence and thanks for checking us out!
|
|
|
Up for auction is 2 Hilti B 36/3.0 LiIon batteries 36 Volts 3.0 Ah Used and will not take a charge. Use with the TE6-A36. WSR 36-A
|
|
|
Up for auction is 2 Hilti B 36/2.4 NiCd batteries 36 Volts 2.4 Ah Used but they do charge. Don't run very long or hold the charge. Use with the TE6-A36. WSR 36-A
|
|
|
NO WORKING! It was working. Have not idea what is wrong with it.
|
|
|
This jackhammer is in near mint condition. It has minor scratching and nicks near the bit opening. Manuals and bit lube are included. The case is in similar condition to the jackhammer. If the shipping looks too high or too low then let me know and we can work out a better shipping price. You also may pick this item up in person. This item in case weighs over 70 pounds so the shipping won't exactly come out to $5. I accept returns within 14 days and will be happy to answer any questions regarding my listings. Thanks! Deb
|
|
|
As pictured Milwawkee heavy duty Demolition Hammer in good working condition. Box is a bit beat up.But solid. Includes 3 bits as pictured.
|
|
|