|
|
Order by: |
0 bids $10.95 Shipping
Condition: Used Location: Clinton Township, United States
(2) brass & steel Magnetic TRANSFER Blocks Different Sizes Flat Parallel blocks. The blocks are in very good condition for the age and are smooth to the touch. The sizes are shown with the caliper in the pictures.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Pair Of Cast Iron V-Blocks. Used As a Support For Round Stick. Unit Weight: 1.70 Lbs Per Block Estimate Only . Quantity: 1 Set ( 2 Pc Per order). Product Detail. High Quality Castings, Properly Seasoned Against Distortion.
Buy It Now
Free Shipping
Condition: New Location: Azusa, United States
[HIGH-QUALITY MATERIALS]: Made from high-quality tool steel with a hardness of 50 HRc, this parallel set is durable and long-lasting. [EASY STORAGE AND TRANSPORT]: Complete with durable plastic case for easy storage and transport.
Buy It Now
$20.00 Shipping
Condition: Used Location: , UA
[ ] We are here to help and we hope you will be satisfied with our products.
Buy It Now
Free Shipping
Condition: Used Location: Waterford, United States
USED, PARALLELS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Pair Of Cast Iron V-Blocks. Used as a support for round stick. 90 Degree V in center. Unit weight: 4.65 LBS EACH. Product Detail. Height: 3-1/8". Supplied in pairs. High quality castings, properly seasoned against distortion.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
4 Pair 3/16" -1/2" x 6" Parallel Set. 1 Pair 3/16" x 1" x 6" With 5/16" Hole. 1 Pair 3/16" x 1-1/4" x 6" With 5/16" Hole. 1 Pair 1/2" x 1-1/2" x 6" With 1/2" Hole. 1 Pair 1/2" x 1-3/4" x 6" With 1/2" Hole.
Buy It Now
Free Shipping
Condition: Used Location: Hillsborough, United States
EACH BLOCK PAIR IS WRAPPED IN WAX PAPER. POSSIBLY NEVER USED BEFORE. EACH BLOCK IS 1/4" THICK AND 6" LONG. THE WIDTH STEPS UP FROM 3/4" TO 1-3/4". SEE PICTURES.
0 bids $10.95 Shipping
Condition: Used Location: Clinton Township, United States
The blocks are in very good condition for the age and are smooth to the touch. The sizes are shown with the caliper in the pictures. One has the makers mark pictured. Normal use, age, and wear shows.
0 bids $10.95 Shipping
Condition: Used Location: Clinton Township, United States
Toolmaker made and precision ground and hardened with a 5/16-18" tapped hole through. The blocks look great but have oil stains as pictured. The edges are all bright and shiny. They are matched together.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： BRAND NEW 9 Pairs Wavy Parallel Set 1/2 to 1-1/2 Gages Harden Steel Machinist Tool .0002'' Material: High Quality Spring Steel Each Parallel Hardened and Precision Ground For Use On Precision Clamping For Drilling, Milling, Boring, Grinding, And Assembly Operations 9 Pairs: 1/2" To 1-1/2" x 1/8" Increments +/- .0002" Parallelism Thickness Of The Spring Steel 0.3mm.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Parallelism: +/-. 0001". Hardness: 50 HRC. Size Range: 1/2 - 1-11/16" By 1/16" Intervals. 20 Pairs 1/32" Ultra Thin Parallel Set. Each Parallel Is 1/32" Thick x 6" Long Without Any Holes On The Body.
0 bids Free Shipping
Condition: New Location: Seelampur SO, India
Set of 2 Pcs Cast Iron V-Block 6" Long Ground 90 Degree. Used As A Support For Round Stick. Block Dim L x W x H (in) 90 Degree V in center. Quantity: 1 Set. Unit Weight.
0 bids $21.86 Shipping
Condition: New Location: , India
Used As A Support For Round Stick. Block Dim L x W x H (in) 90 Degree V in center. Quantity: 1 Set. Unit Weight.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square Features: Stepped grove construction permits low or high clamping. Hardened steel. All squares precision ground parallel and square. Sold in matched pairs. About Delivery: We have warehouses in California and New Jersey. We will follow the principle of nearest delivery. When one warehouse is out of stock, it will be shipped from another warehouse. Thank you for your understanding. .
0 bids $4.95 Shipping
Condition: New – Open box Location: Chillicothe, United States
Item DetailsSPI Precision Parallels Steel 3/4" Thick x 9" L x 1" H 13-231-6. Explore Endless Deals Wide Variety of Products & Outstanding Prices! Coins & Paper Money. We are not an authorized dealer of this product.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： 6 Pcs Adjustable Parallel Sets Minimum Measuring Range (Inch): 3/8'' Maximum Measuring Range: 2-1/4'' Length Range From : 1-3/4" to 5" Closed Height Range: 3/8" to 1/2", 1/2" to 11/16", 11/16" to 15/16", 15/16" to 1-5/16", 1-5/16" to 1-3/4", 1-3/4" to 2-1/4" Quickly Adjustable And Locked With Screws For Micrometer Applications:For layout, inspection, shop work, set-up, etc. Package Including： New 6Pcs Adjustable Parallel Set 3/8" - 2-1/4" High Precision US .
0 bids $10.95 Shipping
Condition: Used Location: Clinton Township, United States
Pictures 8-11 show the weight of one and the weight of a larger sized steel block (which is not included). They are a black color. Normal use, wear, and age may show.
Buy It Now
Free Shipping
Condition: New Location: Monrovia, United States
High Quality Cast Iron V-Block Set. Used As A Support For Round Stick. Qty: 1 Pair. Supplied In Matching Ground Pairs.
0 bids $15.00 Shipping
Condition: Used Location: Sheffield, United States
ALL PARALLELS MORE THAN LIKELY MADE FROM A-2 AS MOST OF HIS TOOLS ARE STAMPED A-2. DRESSER HAS A 1/4" HOLE BUT HAS A 3/16" SLEEVE AND A PHONO POINT DIAMOND IN IT NOW. PARALLEL SET (4). GRIND VISE PARALLEL SET.
Buy It Now
Free Shipping
Condition: New Location: Jamaica, United States
Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of India we specialize in providing complete tooling solutions.
Buy It Now
Free Shipping
Condition: Used Location: Brattleboro, United States
This is a pair of antique interlocking cast iron parallels. Be sure to see all the photo for details, including where the tip of one finger is broken off and missing. We'll reply as quickly as possible.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification： 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
0 bids Free Shipping
Condition: New Location: Chino, United States
Features:1/8 × 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support.Made from fine quality tool steel, stress relieved against distortion.Precision ground and hardenedCase hardened RC 55 to 62 on 2 sides, top & bottom.Tolerance is parallel to 0.0003 on 2 sides, top and bottom.Dimensions are within 0.001&.
0 bids Free Shipping
Condition: New Location: Jamaica, United States
Bluefox Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of India we specialize in providing complete tooling solutions.
Buy It Now
Free Shipping
Condition: New Location: Rosemead, United States
Flatness 0.005 mm, Parallelism 0.005 mm. Idea For Mounting Work For Precision. Precision Ground On All Sides. Size Within +/- 0.005 mm, Matched Pair Accuracy 0.005 mm. Hardened Steel 56 - 60 RC. 2 Pcs/ Set.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Description： -Made From Fine Quality Tool Steel, Stress Relieved Against Distortion. -Precision Ground And Hardened -Case Hardened Rc 55 To 62 On 2 Sides, Top & Bottom. -Tolerance Is Parallel To 0.0003 On 2 Sides, Top And Bottom. -Dimensions Are Within 0.001" Allowance. -2 Holes In Each Parallel -Complete With Fitted Durable Plastic Case -1/8 X 1/2 X 4", 1/8 X 5/8 X 4", 1/8 X 3/4 X 4", 1/8 X 7/8 X 4", 1/8 X 1 X 4", 1/8 X 1-1/8 X 4", 1/8 X 1-1/4 X 4", 1/8 X 1-3/8 X 4", 1/8 X 1-1/2 X 4", 1/8 X 1-5/8 X 4". Dimensions Are Within 0. 001" Allowance. Package Include： .
Buy It Now
$18.95 Shipping
Condition: Used Location: Lakeside, United States
Set Is complete. What's in the photos is what you will receive...See Photos for details
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough Estimation* Weight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Includes: 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Supplied With Plastic Case When Purchase.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Length: 2-3/8" Width: 2-3/4 Height: 2" Capacity: 2" round, 1-7/16" square Features: Stepped grove construction permits low or high clamping. Hardened steel. All squares precision ground parallel and square. Sold in matched pairs. UPC Does not apply Brand yibei-tech MPN YI165312T Block Type V-Block Shape V Block Block Material Steel Condiion New.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough Estimation* Weight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Includes: 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Supplied With Plastic Case When Purchase.
Buy It Now
Free Shipping
Condition: New Location: Minooka, United States
Parallel Set,10 Pr,1/2 to 1-5/8 In 5TZU3. TESA BROWN & SHARPE 599-921-10. GRAINGER APPROVED M24520.030.0008 MS,M3-0.50,Zinc Plated,8mm,100PK PK 10. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
THIS PARALLEL PAIR IS NOT PERMANENT MAGNET ITSELF.
Buy It Now
Free Shipping
Condition: New Location: Monrovia, United States
Made of high quality casting. Unit Weight: 6 Ounce Per Block Rough Estimation . Qty: 1 Set ( 2 Pc Per order).
Buy It Now
Free Shipping
Condition: New Location: Monrovia, United States
Contents Include Made Of High Quality Steel, Durable. Thickness Of The Spring Steel 0.3mm.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Feature?? 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
Buy It Now
Free Shipping
Condition: New Location: Eden Prairie, United States
This is an unused (opened) adjustable parallel block set 3/8" - 2-1/4" for layout inspection stop work set-up. Material - Made from high quality tool steel- stress relieved against distortion, accuracy ground and hardened.
Buy It Now
Free Shipping
Condition: New Location: Rosemead, United States
Pair Of Cast Iron V-Blocks. Used as a support for round stick. Unit Weight All sets are matched.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough Estimation* Weight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Includes: 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Supplied With Plastic Case When Purchase.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Steel Parallel Set 9 Pair 1/4 inch Thick 6 inch Long 0.0002 inch Precision Plastic Case Dimension: 7 in L x 8-1/2 in W x 2-1/2 in H *Rough Estimation* Weight: 9-3/4 Pounds *Rough Estimation* Accuracy (inch): 0.0002 Thickness (inch): 1/4 Length (inch): 6 Includes: 1 Pair of 3/4 X 6 X 1/4" inch 1 Pair of 7/8 X 6 X 1/4 inch 1 Pair of 1 X 6 X 1/4 inch 1 Pair of 1-1/8 X 6 X 1-4 inch 1 Pair of 1-1/4 X 6 X 1/4 inch 1 Pair of 1-3/8 X 6 X 1-4 inch 1 Pair of 1-1/2 X 6 X 1/4 inch 1 Pair of 1-5/8 X 6 X 1/4 inch 1 Pair of 1-3/4 X 6 X 1/4 inch Supplied With Plastic Case When Purchase.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Pair of cast iron v-blocks. 90 Degree V in center. Used as a support for round stick. Unit weight: 1.45 LB EACH. High quality castings, properly seasoned against distortion. Product Detail.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
9 Pair 1/4" Hardened Steel Parallel Set 6" Long 0.0002" Square Precision 3/4 in 1-3/4. 9 Pair 1/4" x 6" Hardened Steel Parallel Set. Quantity: 1 Set (9 Pair, Total of 18 Pieces). 1 Pair of 3/4 X 6 X 1/4".
Buy It Now
Free Shipping
Condition: Used Location: North Tonawanda, United States
This magnetic parallel and V-block set by George Scherr Co. Order now and experience the convenience and quality of George Scherr Co. Inc. products.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Applications For layout, inspection, shop work, set-up, etc. Features:.
Buy It Now
Free Shipping
Condition: New Location: Madison Heights, United States
PART NO. 701- N-O. HARDENED AND PRECISION GROUND. HARDNESS: HRC56 TO 60. MADE OF HARDENED STEEL, TOP QUALITY.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Brand New V Block Clamp Set Multi-use Gauge Gage Machinist Tool Block Size: 2-3/8 X 2-3/8 X 2" Diameter Min.: 13/64" Capacity Max: 1-3/16" V-Blocks Are 90 Accuracy: 0.0002" All Sides Ground Square And Parallel To Each Other "V" Are Ground Central,Parallel And Square To The Ends Made Of Hardened And Ground Chrome Steel Wooden Storage Case Included Weight: 5 Lbs Overall Wooden Storage Case Quantity: 1 Brand marddpair MPN AMZ712467 Block Type V Block Instrument Type Gage Block Block Material Hardened Ground Steel UPC Does not apply.
Buy It Now
$6.50 Shipping
Condition: Used Location: Burton, United States
🗽TOOLMAKER BUILT PARELLELS 1/4 X 1/2 X 6" (B84-223)
Buy It Now
Free Shipping
Condition: New Location: Rosemead, United States
+/-. 0001" In Parallelism. Range Size Are 1/2" to 1-11/16" By 1/16" Intervals. Made From High Quality Tool Steel- Stress Relieved Against Distortion, Precision Ground And Hardened. Each Parallel Is 1/32" Thick x 6" Long Without Any Holes On The Body.
0 bids $9.75 Shipping
Condition: New Location: Mentor, United States
ONE PAIR OF PRECISION PARALLELS. MADE OF HIGH GRADE ALLOY STEEL. HARDENED & GROUND FROM STABILIZED SHOCK.
Buy It Now
Free Shipping
Condition: New Location: Ogden, United States
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Features: Made from fine quality tool steel, stress relieved against distortion. Precision ground and hardened Case hardened RC 55 to 62 on 2 sides, top & bottom..
0 bids $18.50 Shipping
Condition: Used Location: Sheffield, United States
I HAVE SEVERAL SETS OF HIS BLOCKS AND PARALLELS ON NOW ALL ARE EXCELLENT! TOOLMAKER MADE (4) 1-5/32" (1.160") THICK X 2"+ (2.022") WIDE X 3"+ (3.056") LONG. PARALLELS OR BLOCKS (4 MATCHED)1"+ X 2" + X 3+" LONG.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description: 1/8 X 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support. Features: Made from fine quality tool steel, stress relieved against distortion. Precision ground and hardened Complete with fitted durable plastic case.
0 bids $18.00 Shipping
Condition: Used Location: Sheffield, United States
USED BY A US A TOOLMAKER AND IN PRECISION GROUND FINISH AS SHOWN. BROWN&SHARPE No. 510A TOOLMAKERS MAGNETIC PARALLEL OR BLOCK OR CHUCK 510A. NOT MAGNETIC BY ITSELF. THIS TRANSFER MAGNETISM FROM A MAGNETIC CHUCK TO FERROUS PARTS ATTACHED TO THIS.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
5/32" Thin Super Precision Parallel Set. Contents Include Quantity: 4 Pairs/8 Pcs Per Order. Product Detail. (2) 1/2". Item#: 2456.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: 1/8 × 4" 10 Pair Parallel Set - These are hardened steel & are precision ground in multiple sizes of matched pairs. They are ground for tight tolerances on the top & bottom edges. Use these to be sure your work is square and flat on the bottom of your vise. Place a parallel against each vise jaw & rest your workpiece on top. Parallels raise your work piece within the vise allowing more clearance for cutting tools. The holes in their sides are useful for clamping parallels for extra support..
0 bids $10.95 Shipping
Condition: Used Location: Clinton Township, United States
They all look very good for the age. (5) "sets" & (5) misc loose blocks all various sizes. We checked the heights with a caliper and they are matched in height. (011623)(HD-F3)(2).
Buy It Now
Free Shipping
Condition: Used Location: Gainesville, United States
The item is in preowned, barely used condition, in original plastic case. This Parallel Block Set consists of 4 pairs of gauge blocks made of alloy steel with rectangular shape and steel block material.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： -Steel Parallel Set 9 Pair 1/4 Inch Thick 6 Inch Long 0.0002 Inch Precision -Plastic Case Dimension: 7 In L X 8-1/2 In W X 2-1/2 In H *rough Estimation* -Weight: 9-3/4 Pounds *rough Estimation* -Accuracy : 0.0002” -Thickness : 1/4“ -Length : 6” -Includes: 1 Pair Of 3/4 X 6 X 1/4" Inch 1 Pair Of 7/8 X 6 X 1/4 Inch 1 Pair Of 1 X 6 X 1/4 Inch 1 Pair Of 1-1/8 X 6 X 1-4 Inch 1 Pair Of 1-1/4 X 6 X 1/4 Inch 1 Pair Of 1-3/8 X 6 X 1-4 Inch 1 Pair Of 1-1/2 X 6 X 1/4 Inch 1 Pair Of 1-5/8 X 6 X 1/4 Inch 1 Pair Of 1-3/4 X 6 X 1/4 Inch Package Include：.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Pair of cast iron v-blocks. Quantity: 1 set (2 blocks per order). Used as a support for round stick. Unit weight: 7 LBS PER BLOCK. 90 Degree V in center. High quality castings, properly seasoned against distortion.
|
|
|
|