|
|
Order by: |
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Split Molding Knife, runs two pieces from one board. Most of the knives have only been sharpened lightly once so they are practically new.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives have only been sharpened lightly once so they are practically new.
Buy It Now
Free Shipping
Condition: Used Location: Orlando, United States
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Knives have been used and sitting for a while. Two knife set. Shown on 1/4” grid paper for reference.
0 bids Free Shipping
Condition: Used Location: Raymond, United States
High speed moulder / shaper steel. 1” wide. 5/16” thick. 20 1/2” long. Used mostly for shaper profiles. Over $250 for a full 25” stick new.
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
1 Set (Two) of Non-Corrugated Molding Knives. Overall Length: 5".
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
1 Set (Two) of Corrugated Molding Knives. Overall sizing: 4" x 2.5".
0 bids Free Shipping
Condition: New – Open box Location: Flint, United States
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Knives have been used and sitting for a while. Two knife set. Shown on 1/4” grid paper for reference.
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
1 Set (Two) of Non-Corrugated Molding Knives. Overall Width: 2".
0 bids Free Shipping
Condition: Used Location: Raymond, United States
Lot of 5 pieces! 35” total. Cleaning out the tool room!! Please see pics for lengths. High speed moulder / shaper steel. 1 3/4 wide. 5/16” thick. M2 Value edge. Used mostly for shaper profiles. Over $250 for a full 25” stick new. Please look at other listings!!
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives have only been sharpened lightly once so they are practically new.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives have only been sharpened lightly once so they are practically new.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
1 Set (Two) of Corrugated Molding Knives. Overall sizing: 3.25" x 2".
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
1 Set (Two) of Non-Corrugated Molding Knives. Overall Width: 2".
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
Overall sizing: 6" x 2.25".
0 bids Free Shipping
Condition: New – Open box Location: Flint, United States
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Knives are 3 1/4" tall. 3/8" thick steel.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board multi-width. Most of the knives have only been sharpened lightly once so they are practically new.
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Large molding profile knife. knives have been used and sitting for a while. Three knife set. Shown on 1/4” grid paper for reference.
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Knives are 2" tall. 3/8" thick steel.
0 bids Free Shipping
Condition: Used Location: Raymond, United States
Grind your own moulder knives!! High speed Leitz moulder / shaper steel. 1 5/16” wide. 5/16” thick. 4 1/4” long. Used mostly for shaper profiles. Cut and ready for your profile. Over $185 for a full 25” stick new.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $7.95 Shipping
Condition: Seller refurbished Location: Poulsbo, United States
Corrugated Molding Knife Lot Set. Surplus from commercial molding manufacturer. M2 HSS, 1/4" thick blades, set of three matched and balanced. Shipped with USPS. Actual dimensions 2.25"x2.25"x0.25". Professionally sharpened, bevel edge, ready to use immediately upon receipt.
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Large molding profile knife. knives have been used and sitting for a while. Three knife set. Shown on 1/4” grid paper for reference.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly once so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$4.90 Shipping
Condition: New Location: Boise, United States
Jig Saw Blades. Includes 3 bit set Not for use with radial or table saw molding heads. For Craftsman planer/molders. The thickness of the blades are 1/8" and the width of the blades are 1". Insert Bits.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Shaper / Molder Custom Corrugated Back / CB Knives For 1 5/16" x 2 1/4 " Brick or Panel Molding. Knives are 2 13/16" long 5/16" thick steel.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives have only been sharpened lightly once so they are practically new.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids Free Shipping
Condition: Used Location: Raymond, United States
Lot of 27 pieces! 160”+ Cleaning out the tool room!! Over 6 pieces of they were 25” length!! Please see pics for lengths. High speed moulder / shaper steel. 1 1/4” wide - 2 1/4” wide. 1/4” + 5/16” thick. M2 Value edge. Used mostly for moulder and shaper profiles. Over $250 for a full 25” stick new. Please look at other listings!! Perfect for the guy matching profiles and trying to stay on a budget.
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Knives have been used and sitting for a while. Two knife set. Shown on 1/4” grid paper for reference.
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Knives have been used and sitting for a while. Two knife set. Shown on 1/4” grid paper for reference.
Buy It Now
$9.75 Shipping
Condition: Used Location: Montour Falls, United States
1 Set (Two) of Corrugated Molding Knives. Overall sizing: 5" x 2.25".
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly once so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Knives have been used and sitting for a while. Three knife set. Shown on 1/4” grid paper for reference.
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Shaper / Molder Custom Corrugated Back Knives For 1+" x 7 1/2" Casing or Base Molding. Knives are 7 3/4" long. 5/16" thick steel.
0 bids Free Shipping
Condition: New – Open box Location: Flint, United States
0 bids Free Shipping
Condition: Used Location: Raymond, United States
Used chair rail Corrugated moulding knives. Matched pair. 3 1/8” overall cut. 3/4” depth of cut. Good looking profile. In excellent condition.
0 bids Free Shipping
Condition: Used Location: Raymond, United States
Bar Rail Moulding Knives-Weinig/Schmidt/M-3-HS Corrugated Knives For Moulder.includes template. Condition is "Used". Shipped with USPS Priority Mail.
0 bids Free Shipping
Condition: Used Location: Raymond, United States
15” total. Cleaning out the tool room!! Please see pics for lengths. High speed moulder / shaper steel. 2 1/4” wide. 5/16” thick. M2 Value edge. Used mostly for shaper profiles. Over $250 for a full 25” stick new. Please look at other listings!!
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Large molding profile knife. knives have been used and sitting for a while. Two knife set. Shown on 1/4” grid paper for reference.
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Knives are 3 1/4" tall. 3/8" thick steel.
0 bids Free Shipping
Condition: Used Location: Clatskanie, United States
Large molding profile knife. knives have been used and sitting for a while. Two knife set. Shown on 1/4” grid paper for reference.
0 bids $10.00 Shipping
Condition: Used Location: Raymond, United States
Used stair rail/ chair rail Corrugated moulding knives. Matched pair. 4” overall cut. 1 3/8” depth of cut. Good looking profile. In excellent condition.
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Knives are 3" tall. 3/8" thick steel.
Buy It Now
Free Shipping
Condition: Used Location: Beach Lake, United States
Knives are 2 3/16" long 5/16" thick steel.
0 bids $5.50 Shipping
Condition: Seller refurbished Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
0 bids Free Shipping
Condition: Used Location: Raymond, United States
2 Unground pieces of 3” wide corrugated moulder knife steel. 4” in length. 3” wide. 5/16 thick. New price is well over $300 for a full stick. This is roughly 1/3 of a stick.
|
|
|
|