|
|
Order by: |
0 bids Free Shipping
Condition: New – Open box Location: , IL
NOS TRACTOR PARTSK910608 HOUSING Case IH 770B, 1529, 780, 880UF, 380CK, 880A, 885, 880B, 880UE, 880E, 770A, 880F.
0 bids Free Shipping
Condition: New – Open box Location: , IL
NOS TRACTOR PARTS132101A1 BEARING, ROLLER,40 mm ID x 90 mm OD x 23 mm Case IH CX50, C70, CX60, C80, CX70, C90, CX80, C100, CX90, C50, CX100, C60. Importent Notice . If you have any complaints about your order.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Replaces Part Numbers: WN-AL173569, AL173569. -Backrest Cushion is 9.5" x 8.5" (W x H). -20" Tall: Bottom of the mounting to the top of the backrest cushion. Fits John Deere Tractor models -Will not fit if the Tractor has a plastic inner fender panel.
0 bids Free Shipping
Condition: New Location: Webberville, United States
NOTE: This Fuel Tank has a Pin Hole Vent in the Top Center of the Tank. It allows air into the Tank as the Gas is used up. Colors may vary. Last photo is Actual Photo of Fuel Tank. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More!
0 bids Free Shipping
Condition: New Location: Aurora, United States
Steering Wheel for Ford/New Holland Tractors 8N3600 17.5". Steering Wheel For Ford New Holland 8N3600 Tractor 17.5". Steering Wheel : 8N3600. Trailer Parts. For Ford New Holland Models Whether you need hitches, brakes, or lighting, our trailer parts are designed to enhance safety and performance.
Buy It Now
$13.00 Shipping
Condition: New Location: Faribault, United States
Grille Screen Reforming Tools for John Deere tractors. Designed by a tool maker and John Deere hobbyist, this tool is a must for every John Deere owner as described below. It is very effective, inexpensive and can be used again and again.
0 bids $0.99 Shipping
Condition: New Location: Hebron, United States
■ Auxiliary Venturi: 7.3mm. ■ Venturi (Choke Tube): 28 mm. Carburetor Upgrades. ■ Carburetor Barrels: 4-Barrel. Replace 1901-GG 4-BBL Rochester Quadrajet 4MV carburetor. Cadillac 1969 V8 472 Cu. ■ Choke: Electric Choke.
Buy It Now
Free Shipping
Condition: New Location: Athens, United States
Genuine Fleetguard LF672. Oil Filter.
Buy It Now
Free Shipping
Condition: New Location: Webberville, United States
Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Featured Categories. Warranty6 Month Warranty. 9-5/8" x 2-3/4" center-to-center mounting pattern. How do I know if my order was submitted properly?.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specifications The mounting studs measure 2-3/8 inch center to center,for C113 gas engine,replacement for TSX156,TSX157,TSX319 carburetor. Part NO # 352047R91,352376R92,354184R93,355485R91,372985R91,373957R91, 52499DB,69401D,69404D, 10514A,9748,9749,9752,10514, TSX156,TSX157,TSX319, Fitment: for IH-Farmall for A, AV, B, BN, C, SUPER A, SUPER C.
0 bids Free Shipping
Condition: New Location: Nand Nagri C SO, India
We usually do our best to serve you more than your expedition.
Buy It Now
Free Shipping
Condition: New Location: Cullman, United States
Part Type: CAV Injection Pump Repair Kit. CAV Injection Pump Repair Kit. John Deere. For Makes: Fits John Deere. For John Deere. For John Deere: 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2040, 2240, 2440, 2640, 2020, 2120, 2030, 2130, 2440, 3120, 3030, 3130, 2840, 2940, 300, 300B, 400, 301, 302, 401, 310, 410.
0 bids Free Shipping
Condition: New Location: , United States
Replaces Part Numbers: 8N9510C-HD, 8N9510C, TSX241B, TSX-241B, TSX241C, TSX-241C, TSX33. For 1939 1940 1941 1942 Ford 9N Tractor. For 1947 1948 1949 1950 1951 1952 Ford 8N Tractor. For 1942 1943 1944 1945 1946 1947 Ford 2N Tractor.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
7117174 Bucket Tilt Cylinder Fit for Bobcat Skid Steer Loader S150, S160, S175, S185, S205, T180, T190, 773. High Quality Material Bucket Tilt Cylinder Fully Assembled. 9014 Pinon Shaft Run Out and Gear Drive Backlash Tool For Harley Davidson M8.
0 bids Free Shipping
Condition: New Location: Hebron, United States
This Ford tractor part replaces parts number C5NE9165C. D9NN9165BA, 81811612, 83937061, C5NE9165C, C7NN9162B. Replaces Massey Ferguson OEM Number Fits Massey Ferguson Industrial(s) Fits Massey Ferguson Combine(s).
0 bids Free Shipping
Condition: New Location: Lansing, United States
500 Series, 600 Series, 700 Series, 800 Series, 900 Series, 2000 (4 Cyl.)., 2031, 2111, 2131, 4000 (4 Cyl.)., 4000SU (4140), 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 5000 (1965-1975), 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 8700, 9700, TW10, TW20, TW30 (8/1975-1982), 2810, 2910, 3910, 4110, 4610SU (1981-2/1990), 5110, 5610, 5900, 6610, 6710, 7610, 7710 (1981-10/1991), 7810 (exc. ).
Buy It Now
Free Shipping
Condition: New – Open box Location: Horton, United States
Upper Grille for Ford tractors: 2000 3000 4000 5000 7000.
0 bids Free Shipping
Condition: New Location: Webberville, United States
2N8100A, 2N8100AGV, WRC2N9N8N, WRC-2N9N8N. Winged Design with wing finger lug. Replaces Part Number Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Featured Categories.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Fits Ford Tractor Models: 9N, 8N, NAA, Jubilee. Not for Dry Air filters. Replaces Part Number: ABC422. Mower Parts for Bad Boy, for Briggs & Stratton, for Cub Cadet, for Honda, for Sears, for Snapper & More!
Buy It Now
Free Shipping
Condition: New Location: Riverview, United States
1/8"-Thick x 1 "-Wide Rolled Flex Molded Brake Lining. Lining Is Sold By The Foot or Full Roll . This Lining Can Be Used Externally or Internally On Brake Shoes & Brake Bands and Cannot Be Used In Oil or Grease Applications.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Replaces Part Number: 376525X1. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Olive rubber is 7/16" OD x 1/4" ID x 1/4" Wide. Need help with a part you found?.
Buy It Now
Free Shipping
Condition: New Location: Cullman, United States
ATK6FFR NEW Ignition Kit With Rotor For Ford Tractors 8N, 9N, 2N. Part Number: ATK6FFR. Replaces: 21A7R, ATK6FFR, APN12000A. This tractor part replaces21A7R, ATK6FFR, APN12000A. Part Type: Tractor Ignition Kit With Rotor 8N, 9N, 2N.
0 bids Free Shipping
Condition: New Location: Webberville, United States
, 830 (3 Cyl.)., 920, 940, 290D, 310C, 310D, 315C, 315CH, 315D, 350D, 410B, 410C, 410D, 490D, 344E, 350, 350B, 400G, 444C, 444CH, 444D, 450, 450B, 450E, 455E, 500, 500A, 500B, 510B, 600. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More!
Buy It Now
Free Shipping
Condition: New Location: Springfield, United States
The two holes punched are on 3.5" center to center. Your order cannot be completed without this information.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Fits Models Fits Ford/New Holland Loader Models: 555A, 555B, 555, 550, 535, 420. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Featured Categories. Warranty6 Month Warranty.
Buy It Now
Free Shipping
Condition: New Location: Webberville, United States
Replaces: 1851882M1, 7123-287, 1001883M1, 7180-451. Tractors: Many Models with CAV pump. Do not replace gasket with out replacing the washers and orings or you will take a good chance of the pump leaking and having to do it all over again.
Buy It Now
Free Shipping
Condition: New Location: Riverview, United States
1/8"-Thick x 1 1/4 "-Wide Rolled Flex Molded Brake Lining. Lining Is Sold By The Foot or Full Roll . This Lining Can Be Used Externally or Internally On Brake Shoes & Brake Bands and Cannot Be Used In Oil or Grease Applications.
0 bids $25.00 Shipping
Condition: Used Location: Moody, United States
Case 411 gas tractor air cleaner. No international shipping. E-mail with questions.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Fits Massey Ferguson Tractor Models. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Points, Condenser, Rotor, Spark Plugs, Clip Held Distributor Cap, Custom Spark Plug Wire Set, (4) 386 Plugs, (1) 12 Volt Ignition Coil.
Buy It Now
Free Shipping
Condition: New Location: Des Plaines, United States
For Massey Ferguson TE20, TO20, TO30, TO35, 150, 165, 175, 230, 235, 245, 255, 265, 275, MF285, 20, 20C, 30, 30B, 35, 40, 50, 50A, 202, 203, 204, 205, 2135, 3165, 30D, 40B, 50C. Ladders&Holders Rack. Surface Finish:Powder Coated.
0 bids Free Shipping
Condition: New Location: , United States
This kill switch is fiber optically coupled to isolate your ignition system from your radio system. (no interference). (no interference). Specification: This device plugs into a spare receiver channel.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
8N9510C-HD, 8N9510C, TSX241B, TSX-241B, TSX241C, TSX-241C, TSX33, 9N9510A, B3NN9510A, TSX241A, TSX241B, TSX241C. For Ford Tractor 2N 8N 9N. 1 x Carburetor. Interchange Part Number. We will do everything we can to give you a satisfying solution.
Buy It Now
Free Shipping
Condition: New Location: Fair Grove, United States
John Deere A (584,000 and up). John Deere B (201,000 and up). John Deere G (26,000 and up). John Deere 50, 520 and 530. John Deere 60, 620 and 630. John Deere 70, 720 and 730. Platform Screw - Quantity 2.
Buy It Now
Free Shipping
Condition: Used Location: Ravenswood, United States
Farmall Cub oil dipstick, 14 3/4” overall length. Wirebrushed and painted.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Mower Parts for Bad Boy, for Briggs & Stratton, for Cub Cadet, for Honda, for Sears, for Snapper & More! Need help with a part you found?. EXPERT SERVICE. Qualifying order only. Snow Parts for Ariens, for Briggs & Stratton, for Jacobsen, for Toro, for Troy Built, for Sears & More!
0 bids Free Shipping
Condition: New Location: Bordentown, United States
VCGTX06 6FT Heavy Duty Vernier Adjustable Lock Cable. 1pcs 6FT Heavy Duty Vernier Adjustable Lock Cable a. Fit WD21X10492 WD21X10519 For GE Dishwasher Float Switch. Motorcycle Parts. The large, easy-to-grab knob allows for fine tuning for precise settings.
Buy It Now
$19.00 Shipping
Condition: Remanufactured Location: Cottonwood, United States
MARVEL SCHEBLER TSX 33, 241. SINCE THIS ONE HAD BEEN SITTING FOR YEARS IT RECEIVED A FULL PROFESSIONAL RESTORATION TO MAKE SURE IT'S 100%! NO SHORT CUTS, EVERY ORIFICE CLEANED - NEW SEALS, GASKETS, SCREWS, STUDS, FLOAT VALVE, BRONZE THROTTLE BUSHINGS ARE INSTALLED & PRECISION SIZED TO PREVENT AIR LEAKS.
Buy It Now
$3.00 Shipping
Condition: New Location: , United States
CUB CADET 100, CUB CADET 1000, CUB CADET 102, CUB CADET 104, CUB CADET 106, CUB CADET 108, CUB CADET 1200, CUB CADET 122, CUB CADET 124, CUB CADET 1250, CUB CADET 126, CUB CADET 128, CUB CADET 1450, CUB CADET 1650, CUB CADET 582, CUB CADET 70, CUB CADET 71, CUB CADET 72, CUB CADET 73, CUB CADET 800, CUB CADET 86.
Buy It Now
Free Shipping
Condition: New Location: Webberville, United States
Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! How do I know if my order was submitted properly?. Need help with a part you found?. Qualifying order only.
Buy It Now
Free Shipping
Condition: New Location: Webberville, United States
Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Mower Parts for Bad Boy, for Briggs & Stratton, for Cub Cadet, for Honda, for Sears, for Snapper & More!
Buy It Now
Free Shipping
Condition: New Location: Lapeer, United States
Buy It Now
$2.00 Shipping
Condition: New Location: Syracuse, United States
Personalized/customized with your HIN - engraved and etched.
0 bids Free Shipping
Condition: New Location: Lansing, United States
How do I know if my order was submitted properly?. LAWN & GARDEN.
Buy It Now
Free Shipping
Condition: New Location: , China
If LED bulbs DO NOT turn on, reverse the polarity and connect again. 2Pcs White 1156 LED Light Bulbs. -Will these bulbs fit my vehicle?. These bulbs do fit all vehicles in Compatibility. LED Quantity: 2SMD.
0 bids Free Shipping
Condition: New Location: Walton, United States
Technical Features: Flows: 35(GPH)at most. Currents: 1-2A Voltage: 12V Shut off pressure: 5-9 P.S.I. Inlet and Outlet diameter: 5/16 inch Application: Universal . Pump is self priming and designed for Import Carburetor equipped Cars and Trucks and also Replacement Performance Carburetors . - All 12 Volt Cars , Trucks , Boats & Generators Package Include: 1. Micro external pump*1pcs 2. Fittings*2pcs 3. Bolts*2pcs 4. Yellow Caps*4pcs .
Buy It Now
$6.00 Shipping
Condition: New Location: , United States
2N, 8N, 9N. THE ONLY ELECTRONIC IGNITION WITH A 5 YEAR WARRANTY. FOR TRACTORS WITH A 12-VOLT NEGATIVE GROUND SYSTEM AND FRONT MOUNT DISTRIBUTOR. THIS FITS THE FOLLOWING FORD .
0 bids Free Shipping
Condition: New Location: Webberville, United States
Mower Parts for Bad Boy, for Briggs & Stratton, for Cub Cadet, for Honda, for Sears, for Snapper & More! Snow Parts for Ariens, for Briggs & Stratton, for Jacobsen, for Toro, for Troy Built, for Sears & More!
Buy It Now
$5.49 Shipping
Condition: New Location: Prestonsburg, United States
Spark Plug and Spark Plug Wire for 5 and 6.6 hp Gravely Model L's with the slanted plug. Fits Gravely Model L walk-behinds with the slanted spark plug and Fairbanks-Morse or Wico magnetos. Spark Plug Wire made to OEM specs.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Also Fits Ford New Holland Loader Models: 345C, 345D, 420, 445C, 455C, 455D, 535, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 655. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More!
0 bids Free Shipping
Condition: New Location: Webberville, United States
Replaces Part Numbers: C5NN8286B, C5NN8286BV, VPE4042, 81805637, 87745802. Also Fits Ford New Holland Tractor Models : 2000 (3 CYL.)., 2600, 2610, 3000, 3055, 3100, 3230 (ALL PURPOSE 3 CYL.)., 335 (HIGHWAY UTILITY TRACTOR), 340, 3400, 3430, 3600, 3610, 3930 (ALL PURPOSE 3 CYL.).
0 bids Free Shipping
Condition: New Location: Webberville, United States
Replaces Part Numbers: 23084, B7392A. Super 44, Super 55, Super 66, Super 77, Super 88. HG, OC-3, OC-6, 60, 66, 70, 77, 80, 88, 99. Mower Parts for Bad Boy, for Briggs & Stratton, for Cub Cadet, for Honda, for Sears, for Snapper & More!
Buy It Now
Free Shipping
Condition: New Location: Riverview, United States
Size: 3/16" thick x 2" wide woven brake lining. Woven Brake Lining / can be run dry or in oil.
Buy It Now
$3.00 Shipping
Condition: New Location: , United States
4100, GATOR, GATOR 4X2, GATOR 6X4, GATOR TURF 4X2, GATOR TX 4X2, GT242, GT262, GT275, LX172, LX173, LX176, LX178, LX186, LX188, M-GATOR A1, M-GATOR A2, M-GATOR A3, TRAIL GATOR TX. THIS FITS THE FOLLOWING JOHN DEERE JD .
0 bids Free Shipping
Condition: New Location: Webberville, United States
Fits Ford Tractor Models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710, 8000, 9000, 8600, 9600, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2310, 2610, 2810, 2910, 3610, 3910, 4610, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500.
0 bids Free Shipping
Condition: New Location: Webberville, United States
Replaces Part Number: 1876343M92. Fits Massey Ferguson Models : Multiple applications. Agriculture Parts for John Deere, for Ford/New Holland, for Case, for Massey Ferguson & More! Mower Parts for Bad Boy, for Briggs & Stratton, for Cub Cadet, for Honda, for Sears, for Snapper & More!
Buy It Now
$10.00 Shipping
Condition: Used Location: Rockford, United States
IH SEED PLATE FOR 16 CELL POPCORN.
Buy It Now
Free Shipping
Condition: Used Location: Ravenswood, United States
One pair of Farmall Cub INTERNATIONAL hood emblems. Good condition, all mounting posts are intact, although one is slightly bent as shown in last picture.
0 bids $30.00 Shipping
Condition: Used Location: Moody, United States
This is a 4-bolt front tractor rim. Valve stem hole is good. This is from a Case 411 B gas tractor. No international shipping. Message with questions.
0 bids Free Shipping
Condition: New Location: , China
Description: Part No.: 1751ES-12A3UC12B1S Ref. No.: SA-4673-S,129953-77811 Voltage: 12VDC Application: For Hyundai Excavator R60-5,R210-5,R335-7 excavator Yanmar engine Fit for: Mini Excavator, Tractor, other Machinery and so on INCLUDE: 1 x Solenoid
Buy It Now
$39.99 Shipping
Condition: New Location: , China
Hino J05 J08 Crankshaft Front And Rear Oil Seal Installation Tools. We will respond to you very promptly.
|
|
|
|
Non-working. Holley Carb ur et or numbers on side show: C5NE-951 0L. List: 3013-3(numbers are a little scrat ched. I think this is what it says) This was on a Ford 4000 3-cylinder. Carburetor appears to be good except where the floats attach to carburetor body as sh own in photo abo ve where the screwdriver is pointin g. I don't know if this can be repaired or not.
|
|
|
Up for auction is a PAIR of CULTIVATOR SCRATCHERS for a JOHN DEERE M MT 40 420 430 1010 H and other tractor models. They are in good useable condition. PLEASE CHECK OUT MY OTHER CULTIVATING/FARMALL PARTS AUCTIONS. If you need a Farmall part that isnt listed. Just send me a email and ill check to see if I got it. I will ship internationally. Please email for international shipping price if needed. Thank you for looking!
|
|
|
This is a pair of farmall soybean planter plates the numbers are 3127A
|
|
|
Any questions call 8704034472 Posted with
|
|
|
This came off my Farmall model 200 tractor.I put a electronic ignition and high performance coil on so no need for them.You get the original coil and bracket and a almost new dropping resistor if you want to run it on 12 volts.Tractor was running at take off but sold with no guarantee due to age.
|
|
|
Here we have a good used on off switch for farmall tractors will fit several farmalls the switch works screw are loose not stuck thanx for looking! If you have any questions please feel free to ask before bidding. Please click the link below to see my other items for Ford. Farmall, Case, Allis Chalmers, John Deere and other parts. I DO NOT OFFER SECOND CHANCE OFFERS! Please communicate through ebay messages as i DO NOT CHECK MY EMAIL regularly. good luck and Happy Bidding! Check out my! Be sure to add me to your favorites! Powered by The free listing tool. List your items fast and easy and manage your active items. 466.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fa5%3E466-13def5711f9-0xff-
|
|
|
Selling are 2 brake bands for the Farmall M in good condition.The bands are not perfect but still have some life left.Ask any questions.Payment within 10 days of auction end.I accept all forms of payment Thank You for looking.
|
|
|
This auction is for a Wisconsin crank.Free shipping to continental US.
|
|
|
John Deere Hydraulic breakaway couplers fits 3010 to 8640 tractors. Posted with
|
|
|
Up for auction is the belt pulley we removed from A 1939 Farmall M tractor. The serial# was 4987. This tractor came in running very good and was in good original condition.All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading. WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL. WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM CLOSED WEEKENDS AND ALL MAJOR HOLIDAYS OUR ADDRESS IS 229 THOMPSON RD BAD AXE MI 48413.
|
|
|
Up for auction is the lights(Not original) we removed from A 1939 Farmall M tractor. The serial# was 4987. This tractor came in running very good and was in good original condition.All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading. WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL. WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM CLOSED WEEKENDS AND ALL MAJOR HOLIDAYS OUR ADDRESS IS 229 THOMPSON RD BAD AXE MI 48413. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13e018b837d-0xf8-
|
|
You are bidding on a used clam shell fender off a John Deere 440 I tractor. It needs work not rusted out but has been cut. I have other parts for the John Deere 440. This is being sold at no reserve. Buyers pays shipping. We have other parts for John Deere A. B, H, M, MT, MC, L, LA and LUC. If you don't see it in are store ask us and we can list it. If you need to get a hold of me I can be reach at(856)358-2444 Please check our eBay Store for other Farm Tractor Parts. Please ask questions before bidding to make sure this item is suitable for your use. This item is used- sold"as is" without warranty. Shipping: We will ship this item UPS. Buyer pays shipping charges. Shipping weight 23 lbs. Payment Terms: This item must be paid within 7 days of auction close. If you are picking ... moreit up you must do so within 30 days of auction close. Storage is at your own risk after 30 days. Sales Tax: Items shipped to an NJ address: 7% Items picked up at our shop: 7% even if you do not live in NJ. Exceptions for valid. Signed sales tax certificate AND copy of you authority to collect sales tax Items shipped to states other than NJ: no tax
|
|
TRACTOR OR IMPLEMENT SEAT WITH 30 SLOTS. MEASURES APPROXIMATE: 17 3/4" ACROSS. 14 1/2" FRONT TO BACK, AND 2 1/2" HEIGHT IN BACK. DON'T KNOW WHAT IT WAS TAKEN OFF OF- TRACTOR OR IMPLEMENT? SEE PICTURES OF CONDITION. SURFACE RUST/PITTING BUT FEELS SOLID, DIRTY, DENTS/DINGS, SCRATCHES, PAINT PEELED/GONE. OIL WAS SPILLED ON IT. OUR ZIP 67108 DIMMENSIONAL WEIGHT 5-6LBS BOX 18X15X4 Additional Notes. Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before ... morepurchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) Buyer pay
|
|
You are a looking at what I believe to be used Bosch American FU4 Vintage Magneto Gear Assembly and Points. I don’t know if the points are New Old Stock or not. The points are in some packaging. The points need cleaned. The gear is used but looks in pretty good shape for its age. There is no teeth missing. There is a little bit of light surface rust stains on the tubular part of the gear assembly. This gear is made out of the red fiber material. The gear appears to be in good used condition. The points will need to be polished up. The box I have says FU4. This item will be sold as-is. No returns or refunds once the item is purchased. Buyer pays all shipping costs. I ship to the U.S.A only. Accepted payment method is Paypal with a Confirmed Address only. PLEASE NOTE: OHIO RESIDENTS WILL HAVE ... moreSALES TAX ADDED TO THEIR TOTAL. Please note that I ship Monday through Friday only. Not Saturday or Sunday. I usually try to ship within 48 hours of your payment unless your payment is received on a Friday in which case it will be shipped the following Monday. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e04782b3b-0x102-
|
|
|
For sale is a used front section of hood that came off a farmall 140 the hood is in fair shape it does have couple spots that will need some repair it also has some rust but hood is very usable.This is a used part so it is being sold as-is call with any questions 217-370-6546 or 217-370-1149 thanks for looking and check out other items for sale.
|
|
|
This is a nice tractor. It has a 2 pt fast hitch. Metal is straight and it has the emblems. Tires are good. Good TA. 12 volt. Outside tire measurement is about 7 ft. Take a look at the pictures and let me know if you have any questions. Please be patient with me. I am selling this for my father-in-law and I don't know alot about it, but I will post questions as they come in. If you purchase the tractor and wish to have it shipped. We will see that it gets on a truck of your choosing. Thanks!
|
|
|
UP FOR AUCTION IS AN ORIGINAL ROUND ENGINE OIL DIP STICK(12" AND A ORIGINAL ROUND TRANSMISSION OIL DIP STICK(8 3/4" CHECK OUT MY OTHER LISTINGS IF YOU ARE LOOKING FOR OTHER PARTS. I WILL BE LISTING MANY OVER THE NEXT WEEK. THANKS FOR LOOKING. I DO COMBINE SHIPPING AND ALL ITEMS POSSIBLE. PLEASE KEEP IN MIND WHEN DOING FEEDBACK. I DONT CONTROL THE SHIPPING PRICES AND DON'T ADD TO THEM, I KNOW THEY ARE GETTING HIGH AND DO MY BEST TO COMBINE AND ADD OPTIONS OF USPS OR UPS.
|
|
|
This is a original farmall hydraulic lever for H or M tractors. The lever is stuck but should free up. It was full of oil when removed. There is no breaks or repairs. I will combine shipping when you buy more than one part to save you money! We have many salvage tractors and parts stored inside off John Deere A B G H M 50 60 70 520 620 630 720 730 3020 4010 4020 Ford 3000 4000 Allis WD B and Farmall C H M 350 tractors. We list new parts weekly!
|
|
|
VINTAGE JI CASE 119 4 TRACTOR ENGINE HEAD BOLTS Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e056468b3-0xfb-
|
|
|
VINTAGE JI CASE TRACTOR HYD PUMP DRIVE DRIVE BUTTON off 1950 DC Tractor. Used parts, Used original Case item, Note- buyers outside continental US will incur a shipping charge, To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
Vintage Case DC Manifold Hold Downs Set of(2) Tractor. Implement, Farming DC. DC-4, SC, SO, DO This Case DC tractor manifold hold down set is USED. This item is being sold AS IS. This Case tractor manifold hold down set was removed from a Case DC tractor. This tractor manifold hold down set may possibly fit other models and years of Case tractors. This tractor manifold hold down set is in good condition. Complete as removed from tractor. Nice replacement Case DC parts. No dings or dents. No broken parts. I have completed some cleaning on these pieces. These pieces has some missing paint. This vintage Case DC tractor manifold hold down set would make a great addition to any restoration project. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ITEM SOLD AS IS. Locations outside continental US will incur a shipping expense. To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13e07fd3a35-0xfa-
|
|
|
VINTAGE JI CASE 119 4 TRACTOR FUEL PUMP Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE VAC TRACTOR TRANS BRAKE BASE, Original used Case parts. Off VAC Model. Note- Buyers outside continental US will incur a shipping charge, To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e07fd38cd-0xfd-
|
|
Normal 0 false false false EN-US X-NONE X-NONE Here is a instrument panel for a Case 430 or 530 case o matic tractor. Good shape. 1420) Please take time to read the following* My sincere apologies to all of the great E-bayer’s around the world who have to read the following. But due to previous complaints the following is necessary. Top reasons NOT to bid and be our customer: You’re an impossible person to please. You’re looking for something for nothing. You expect used antique parts to be perfect. You’re not sure of the tractor model that you’ll be putting the part on. You have 3 excuses as to why you can’t pay. You’re buying for your brother. Uncle. Sister-in-law, etc. who hasn’t even seen the item. You can’t afford the shipping and think that we should deliver it for free or split the ... moreshipping costs. You're on our blocked bidder list and you're having a friend or family member bid! To be continued* Wrong information gets you the wrong part EVERYTIME…guaranteed! ~ Payment: Payment must be received within 5 days of close of auction. We only accept Pay Pal. However other arrangements can be made. If doing a local pick up. Cash is always an option. ~ Shipping: Orders usually ship 1– 2 business days after receiving a cleared payment. Buyer pays for all shipping costs. Local pick up is available by appointment and can be picked up in Coloma. MI. We ship via the post office. Items over 150 pounds are shipped freight collect. Meaning we ship the item freight then you pay the freight charges at the time the item is delivered. For freight items there is also a $25.00 skid/packaging fee that will be added to the invoice at the end of the auction. All freight items are quoted“dock-to-dock/ business-to-business” Additional charges will apply for residential delivery or limited access. ~Warranty: Item/s in auction are being sold as-is(no warranty) No returns. Refunds, or exchanges. Items are described to the best of our ability. We are not experts. Nor do we cla
|
|
Here is a Case O Matic dri ve for a Case 430 or 530 tr actor. This item appears to be in good shape. Removed from a running tractor. 2 7 6 3) Normal 0 false false false EN-US X-NONE X-NONE This item will be shipped by freight and the amount will be determined by where you’re located. Shipping will be freight collect. Meaning you pay the freight charges upon delivery. There is also a $25.00 skid/packaging fee that will be added to item when purchased. Local pickup is also another option for this item. All freight items are quoted“dock-to-dock/ business-to-business” Additional charges will apply for residential delivery or limited access. Please read the entire listing. We have been getting lots of emails from people who would know the answer if they had just read the listing! We are willing ... moreto do about anything to make you happy and will attempt to answer all emails. So please don't be afraid to ask a question BEFORE buying.AFTER is generally too late! Please take time to read the following* My sincere apologies to all of the great E-bayer’s around the world who have to read the following. But due to previous complaints the following is necessary. Top reasons NOT to bid and be our customer: You’re an impossible person to please. You’re looking for something for nothing. You expect used antique parts to be perfect. You’re not sure of the tractor model that you’ll be putting the part on. You have 3 excuses as to why you can’t pay. You’re buying for your brother. Uncle. Sister-in-law, etc. who hasn’t even seen the item. You can’t afford the shipping and think that we should deliver it for free or split the shipping costs. You're on our blocked bidder list and you're having a friend or family member bid! To be continued* Wrong information gets you the wrong part EVERYTIME…guaranteed! ~ Payment: Payment must be received within 5 days of close of auction. We only accept Pay Pal. However other arrangements can be made. If doing a local pick up. Cash is always an option. ~ Ship
|
|
|
VINTAGE JI CASE TRACTOR FUEL STRAINER off 1950 DC Tractor. Used parts, Used original Case item, Note- buyers outside continental US will incur a shipping charge, To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR LEFT SIDE FENDER Pretty straight. No rust, Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR RIGH T SIDE FENDER Pretty straight. No rust, Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE TRACTOR FRONT END WEIGHT- 30 SE RIES TRACTORS? Auction is for 1. 2 are available, Plan to pick up at 49093 in southern Michigan, Used condition, May fit Others? Use as is or refinish for the show tractor, Locations outside the continental US will incur a shipping charge, YES, We will accept other payment forms, TO see other tractor parts, farm collectibles or original manuals, Check my Ebay store by clicking on the store icon in upper right corner of this listing. Thanks. NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR AIR CLEANER ASSY- Nice piece. Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
Massey Harris# 3 Plow Share May be N.O.S. Part# 12QSGH. I don't believe this was ever used. Light rust is from long storage. Item sold as is. Be sure to check out our other items For Sale or Buy it Now! We try to put something new on everyday! Shipping: We will combine shipping if you purchase more than one item. Insurance and Delivery Confirmation is added to every package. Payment Instructions: We will ship to the address E-Bay gives us on the invoice, unless other arrangements have been made the day of the sale. Please wait for our invoice to pay. Not the purchase order you receive from E-Bay. We may be able to save you some money on shipping. Returns: If you feel this item was" Not as Described" or was damaged in shipment. Please contact us within 14 days for a Claims Resolution. ... moreInsured items th at are damaged during shipping will be refunded in full. Immediately upon recieving the Insurance Claim payment by Postal Carrier. Feedback: I will give automatic Feedback upon prompt payment. Please leave positive feedback if you are satisfied with your purchase. If there is a problem. Please contact me so it can be addressed prior to any Negative Feedback.
|
|
|
John Deere 60 bucket of bolts. May not be a complete set, but nice to have extra we combine ship. We ship usps, ups, speede, we try to pick the most reasonable way to get it to you, shipping costs are estimated, freight cost will be given at your request. We are a family business and want to try to have 100% satisfaction. If there is a problem with a part or condition let use know and we will replace or refund your money with in the 14 day time frame following Ebays Guidelines if you have any questions call Chris at 952-913-0181. Check out my! Be sure to add me to your!
|
|
|
Oliver 88 Gear Shift Row Crop Tractor Diesel. Farm, Implement, Puller This Oliver 88 gear shift is USED. This item is being sold AS IS. You are bidding on a gear shift which was removed from an Oliver 88 tractor. This gear shift was removed from a diesel tractor. This gear shift may possibly fit other makes and models of Olivers. This gear shift may possibly fit the 66. 77, 88 and Supers. I am not 100 percent sure of this, please check on compatibility before bidding. This gear shift was removed from a running puller tractor. This Oliver gear shift is in good condition. This Oliver 88 gear shift would make a great addition to any restoration project. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE OLIVER? JOHN DEERE TRACTOR 12 x 28" POWER ADJUST RIM& CENTER Good solid rim. 8 Bolt, 8" on center, 5 7/8" center bore, Reconditioned, Plan to pick up at 49093 in southern Michigan, Used condition, May fit Others? YES, We will accept other payment forms, TO see other tractor parts, farm collectibles or original manuals, Check my Ebay store by clicking on the store icon in upper right corner of this listing. Thanks. NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
Here is a air cleaner for a Oliver 60 tractor. This item appears to be in good shape. 2 800) Normal 0 false false false EN-US X-NONE X-NONE Please read the entire listing. We have been getting lots of emails from people who would know the answer if they had just read the listing! We are willing to do about anything to make you happy and will attempt to answer all emails. So please don't be afraid to ask a question BEFORE buying.AFTER is generally too late! Please take time to read the following* My sincere apologies to all of the great E-bayer’s around the world who have to read the following. But due to previous complaints the following is necessary. Top reasons NOT to bid and be our customer: You’re an impossible person to please. You’re looking for something for nothing. You expect ... moreused antique parts to be perfect. You’re not sure of the tractor model that you’ll be putting the part on. You have 3 excuses as to why you can’t pay. You’re buying for your brother. Uncle. Sister-in-law, etc. who hasn’t even seen the item. You can’t afford the shipping and think that we should deliver it for free or split the shipping costs. You're on our blocked bidder list and you're having a friend or family member bid! To be continued* Wrong information gets you the wrong part EVERYTIME…guaranteed! ~ Payment: Payment must be received within 5 days of close of auction. We only accept Pay Pal. However other arrangements can be made. If doing a local pick up. Cash is always an option. ~ Shipping: Orders usually ship 1– 2 business days after receiving a cleared payment. Buyer pays for all shipping costs. Local pick up is available by appointment and can be picked up in Coloma. MI. We ship via the post office. Items over 150 pounds are shipped freight collect. Meaning we ship the item freight then you pay the freight charges at the time the item is delivered. For freight items there is also a $25.00 skid/packaging fee that will be added to the invoice at the end of the auction. A
|
|
|
HERE WE HAVE A PTO AND DRIVE SHAFT I BELIEVE CAME FROM A OLIVER OC3. FROM WHAT I UNDERSTAND IT WILL FIT MINNEAPOLIS MOLINE BF AND BG SOME MONTGOMERY WARD MODELS, BF AVERY AND CASE 310 CRAWLER BUT PLEASE DO SOME RESEARCH. THE CASTING HAS BEEN REPAIRED ON THE BRACE INSIDE THE UNIT. LOOKS LIKE SOMEONE BACKED INTO SOMETHING WITH THE OUTPUT SHAFT BREAKING THE BRACE INSIDE. THERE IS AN AREA ON THE OUTSIDE OF THE CASE THAT HAS BEEN REPAIRED AS WELL. BOTH REPAIRS LOOK TO BE WELL DONE AND THE SHAFTS AND SHIFTER MOVE FREELY. SHIPPING WILL BE $45.00(THIS IS HEAVY) IF YOU NEED MORE INFO PLEASE CALL JOHN@ 517 857 3764. UNIT SOLD AS IS THANKS FOR LOOKING.
|
|
up for auction is a caterpillar master publications index manual or catalog. this manual tells you in what manual you can find information for what item on a machine. sold as is. Ask any questions before bidding. Check out my other items! Be sure to add me to your favorites list! COMBINED SHIPPING: if a buyer wishes to purchase multiple items. I will combine shipping within reason. In these cases, buyers are instructed to ignore posted shipping, and I will recalculate shipping based on the new combined weights AFTER THE AUCTIONS ARE OVER. I am sorry for these changes, but I am having to adapt to new eBay policies. The fine print: these are old tractor parts. 60 to 70 years old in some cases, not new ones. Please expect such. Do not expect new, perfect parts. No refunds. Unless I have severely ... moreerred somehow. Email policy: please be kind with emails. No rudeness. Kindness begets kindness, rudeness begets rudeness. My actual email is mdmurphy1@peoplepc.com if you are having trouble emailing me. Please be aware of SPAM FILTERS! If you have a hotmail. Msn, yahoo, netzero, AOL, and some other email accounts, please check your spam filter regularly. I email every one who emails me, and many times I have to resend emails many times as people do not check their spam filters, and emails get routed to those filters very often. Shipping: if the part is small. I will ship it postal flat rate. If it’s large, I will ship it UPS. I generally ship all my UPS stuff once a week, on Monday or Tuesday. I am a one man band, and it takes lots of time to package up parts. I do the best I can. Feedback: feedback is left after it is received. If you wish to receive feedback from me. Please leave positive feedback for me upon completion of the transaction. On Aug-26-08 at 18:26:16 PDT. Seller added the following information:
|
|
|
up for auction is an international parts catalog. it is for the 706 and 2706. it is TC-99. Revision 2. it is missing the original covers. contents are ok. sold as is, ask any questions before bidding. Check out my other items! Be sure to add me to your favorites list! On Aug-26-08 at 18:26:16 PDT. Seller added the following information:
|
|
|
For sale is a set of used allis chalmers wd45 diesel american bosch injectors numbers on injectors are AKB60S1580A 4-55.This is a used part so it is being sold as-is call with any questions 217-370-6546 or 217-370-1149 thanks for looking and check out other items for sale.
|
|
YOU ARE BIDDING ON A CASE INTERNATIONAL FARMALL TRACTOR REMAN CLUTCH KIT. 9" 6 SPRING, 6 SPLINE, 1-1/4" HUB, WOVEN LINING. REMAN PRESSURE PLATE AND DISC DONE BY THE MANUFACTURE R. NEW RELEASE BEARING AND PILOT BUSHING. FITS CASE INTERNATIONAL TRACTOR MODELS A. Super A, B, C, Super C, 100, 130, 140, 200, 230, 240, 404, 2404. Normal 0 false false false EN-US X-NONE X-NONE PLEASE VERIFY STYLE/ TEETH COUNT/ MEASUREMENTS BEFORE BIDING! ALL INTERNET SALES ARE SHIP OUT ONLY! AS A SELLER. WE ARE NOT RESPONSIBLE FOR ANY TARIFFS OR FEES FOR INTERNATIONAL SHIPPING If you have any questions. Email me. Also checkout my other CHEAP AUCTIONS. EBay Store. Thanks for your business! SHIPPING DOES NOT INCLUDE TARIFFS. Please email us with any questions. Check out our other auctions Cheap Tractor Parts ... moreTake a cruise through our ebay store. Thank you For viewing our auction 270-382-2894 by adding my eBay Store to your Favorites
|
|
|
Up for auction is the engine(ran very good at removal) we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the temp gauge we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
VINTAGE JI CASE 119 4 TRACTOR FAN BLADE Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR BATTERY HOLD DOWN RODS- BOLTS Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR FENDER EXTENSIONS Pretty straight. No rust, Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e0baabe75-0xfb-
|
|
|
VINTAGE JI CASE 119 4 TRACTOR RIGHT SIDE STEP Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13e0baabfdd-0xee-
|
|
|
VINTAGE JI CASE TRACTOR STEERING SHAFT& GEAR off 1950 DC Tractor. Used parts, Used original Case item, Note- buyers outside continental US will incur a shipping charge, To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
AUCTION IS FOR A NICE 530 CASE HOOD WOULD BE A GOOD HOOD TO RESTORE NO RUST THRU I TOOK OFF OF A 530 CASE O MATIC THAT I AM PARTING OUT TRACTOR RUN GOOD BUT SMOKED EMAIL ME IF YOU NEED SOMETHING FROM TRACTOR I WILL TRY TO LIST IT WILL BE LISTING MORE PARTS AS I CAN THANKS
|
|
|
VINTAGE JI CASE 119 4 TRACTOR WATER PUMP Turns smooth. Not leaking, Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR FOOT THROTTLE& ROD Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
VINTAGE JI CASE 119 4 TRACTOR ENGINE OIL DIP STICK Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
Up for auction is the tool box we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the instrument panel we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the running boards we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the front bumper(as-is) we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the front axle pivot we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the hyd pump we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the gas tank(clean inside) we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the top link bracket we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the tachometer cable we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
|
Up for auction is the lights we removed from A Ford 601 gas tractor. This tractor was in good running original condition when dismantled. All parts are being sold as good usable condition unless stated otherwise in the listing or listing heading.WE WILL COMBINE SHIPPING AND LOCAL PICKUP IS WELCOME AS WELL.WE ALSO OFFER FREIGHT SHIPPING ON ITEMS MARKED LOCAL PICKUP ONLY. Thank you for visiting my auction! WE ARE A BUSINESS AND ARE OPEN MON-FRI 8AM-5PM EXCLUDING ALL MAJOR HOLIDAYS. WE ARE NOT OPEN WEEKENDS. IF YOU WISH TO PICK UP ITEMS IN PERSON,THE ADDRESS AT OUR SHOP IS 229 Thompson Rd. Bad Axe, Mi. 48413
|
|
Milwaukee Keystone Pitman Stick Part# A-257 N.O.S. Use it or Display it Item sold as is. Be sure to check out our other items For Sale or Buy it Now! We try to put something new on everyday! Shipping: We will combine shipping if you purchase more than one item. Insurance and Delivery Confirmation is added to every package. Payment Instructions: We will ship to the address E-Bay gives us on the invoice, unless other arrangements have been made the day of the sale. Please wait for our invoice to pay. Not the purchase order you receive from E-Bay. We may be able to save you some money on shipping. Returns: If you feel this item was" Not as Described" or was damaged in shipment. Please contact us within 14 days for a Claims Resolution. Insured items th at are damaged during shipping ... morewill be refunded in full. Immediately upon recieving the Insurance Claim payment by Postal Carrier. Feedback: I will give automatic Feedback upon prompt payment. Please leave positive feedback if you are satisfied with your purchase. If there is a problem. Please contact me so it can be addressed prior to any Negative Feedback. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13e0bbd10cc-0xed-
|
|
|
VINTAGE ZENITH 1-BARREL CARBURETOR. ID TAG NUMBER 13405. CHECK MODEL NUMBER AND PICS TO VERIFY IT FITS YOUR APPLICATION. CARB CORE APPEARS MOSTLY COMPLETE. ALL LINKAGE MOVES FREE. THROTTLE BORE MEASURES 1" AND MOUNTING BOLTS CENTER TO CENTER ARE 2-1/4" GOOD FOR REBUILDING OR PARTS. CHECK MY OTHER AUCTIONS FOR OTHER VINTAGE CARBS. PLEASE E-MAIL WITH ANY QUESTIONS BEFORE BIDDING. I DO COMBINE SHIPPING ON MULTIPLE PURCHASES.
|
|
1972 IHC INTERNATIONAL LOADSTAR 1600 TRUCK HEADLIGHT BUCKET BEZEL. SCRATCHES, SURFACE RUST, WIRES CUT, SCREWS MISSING AND WIRE GONE ON ONE, NEED GASKETS UNDER BUCKETS. UNTESTED-DON'T KNOW CONDITION, SELLING FOR PARTS/REPAIR. BOX SIZE 17X11X11 1) 7" DIAMETER SEALED BEAM A114. 2 1) WAGNER B-7. 2D1 2)ALUMINUM BEZELS-HOLE TORE A LITTLE Additional Notes. Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but ... moreif you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) Buyer pays return shipping charges. 15% restocking fee will be c
|
|
Fairbanks Morse Magneto Type: FMJ V4B7 4 cly# A990718 Item turns over freely. But it don't snap. and has no resistance to it. Unsure of the problem. So Selling" AS-IS" and, Please Buy/Bid accordingly. Item been in storage and needing the extra room. I will be listing others soon. At this price you can save money even if you need one for a core. Please look over the pic's closely. This is the item your buying. And as always e-mail us with any questions. Terms of Sell: AS- IS" ===================================== Terms of Payment: Single Orders: Immediate payment is required upon selecting"Buy It Now" or and upon checking out. Payment Combined Orders: If you purchase multiple items from us. Then please email us BEFORE you pay, advise if insurance is wanted or ... morenot. We will e-mail an invoice with your details of purchase, shipping, Ins. if wanted or not + cost) for your combined TOTAL AMOUNT for approval. Once Received: TOTAL AMOUNT IS DUE Or Reply Back With Correct Changes. ===================================== Method of Payment: We only accept payment via"PayPal" or Major Credit Cards Thu"PayPal" ===================================== Shipping Terms: Buyer is responsible for shipping insurance. We offer free shipping on some items. At customers request we can offer local pick up. Where as NO SHIPPING COST IS NEEDED. Domestic Type: We ship Monday- Friday 1 business day after payment received. Some are shipped SAME DAY(see feedback) We ship to the Continental US on all of our sells. Our shipping carriers are USPS Priority Flat Rate. and UPS Ground Rate International Shipping: We at times offer international selling and we have sold and shipped internationally when someone has requested this service. Usually it is on items that can be shipped by USPS International Air with item weighing less then 4 pounds. But other rates can be done by request. Please allow time to get price quote from USPS Office themself's. I have had the e-service for whatever reasons not be
|
|
DELCO REMY# 1107343 3M 10. 3 BOLT MOUNTING FLANGE. TURNS FREELY, UNTESTED, DON'T KNOW IF IT WORKS OR NOT OR WHAT IT FITS. NO VISIBLE CRACKS OR WELD, DON'T KNOW IF IT'S 6 VOLT? OR 12 VOLT? BUT THINK IT'S 12 VOLT? DIRTY. UNTESTED, CONDITION UNKNOWN, SELLING FOR PARTS/CORE/REBUILDER. REVISED: GOOGLED SHOWS IT FITS: 12 TOOTH STARTER* INTERNATIONAL Payloaders H-25B IHC C-153 Gas 1968-1979. INTERNATIONAL Power Units UC-135B C-135 1965-1971. INTERNATIONAL Power Units UC-153 C-153 1964-1971. INTERNATIONAL Straddle Carriers 660 C-146 Gas 1965-1974. INTERNATIONAL Straddle Carriers 770 C-146 Gas 1971-1973. INTERNATIONAL Straddle Carriers 780 C-146 Gas 1971-1974. OUR ZIP 67108. 26 LBS LARGE FLAT. Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, ... morewhich automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or c
|
|
EDISON SPLITDORF MAGNETO. TYPE RM 03008P, SN# F1704. NO VISABLE CRACKS, TURNS AND FEELS LIKE ITS HOOKING UP, DON'T KNOW IF ITS NOT FIRING OR NOT, BUT I DID GET SHOCKED WHEN I TURNED IT. THERE ARE 2 WIRES THAT ARE WIRED OFF AND WAS SET UP FOR 2 CYLINDERS, BUT CAN BE SET UP FOR 4 CYLINDERS. WIRES-NEED REPLACED. SURFACE RUST, PAINT IS PEELING OFF/GONE, DIRTY. SINCE WE HAVE NOT TESTED AND CONDITION IS UNKNOWN, SELLING FOR CORE/PARTS/REBUILDER. DON'T KNOW WHAT IT FITS- OLD MOTORCYCLE OR TRACTOR? Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive ... moreof years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy. You may return this item within 14 d
|
|
TRACTOR TRUCK HEADLIGHT FENDER DRIVING FOG LIGHT LOT OF 2 TRACTOR TRUCK LIGHT. DON'T KNOW WHAT THEY TAKEN OFF OF, UNTESTED, SO NOT SURE IF THEY WORK OR NOT OR WHAT THEY FIT? NORMAL SCRATCES, SCUFFS, DINGS, DENTS, SURFACE RUST, DIRTY. MOUNTING GOOD UNLESS MARKED. WIRE FRAYED. NOT TESTED AND IF THEY WORK OR NOT. NORMAL SCRATCHES, SCUFFS, NICKS/DINGS, ALL NEED CLEANED AND POLISHED. NOT SURE IF BULBS WORK ON ANY OF THESE? WIRES ALL CUT. SELLING FOR PARTS/REPAIR. MOUNTING GOOD BOLT TORCHED OFF GLASS HAS SOME TORCH PITS LIGHTS MEASURE(A) 4 1/4(B) 4 DIAMETER(A) 5" B) 4 3/4 OVERALL ACROSS AND(A) 9" B)7 1/2" TOTAL HEIGHT(A) 4(B) 4 1/2" DEPTH BEZEL IS MISSING OFF OF(A) MOUNTING BEEN TORCHED OFF RUBBER BEZEL SMALL CRACKS SEE PHOTOS Additional Notes. Payment is due in 7 days. But ... moreEbay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will n
|
|
NOT SURE WHAT IT WAS REMOVED FROM? STAMPED: 800-1. BOTTOM# 8MM. ON PULLEY S-526-8. ON IMPELLAR# 526-9. TURNS FREELY, DON'T KNOW ANYTHING ABOUT IT. NO VISABLE CRACKS. SURFACE RUST. DIRTY, UNTESTED DON'T KNOW CONDITION- SELLING AS CORE/REBUILDER. OUR ZIP 67108 12 LBS Additional Notes. Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures ... morenot noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) Buyer pays return shipping charges. 15% restocking fee will be charged, item must be in same condition as received. refund will be is
|
|
I BELIEVE THIS RADIATOR TUBE THAT RUNS TO BLOCK WAS REMOVED FROM ALLIS CHALMERS TRACTOR MODEL? BUT NOT SURE. STAMPED: 4598A. FROM END TO THE CURVE OF SPOUT IS 5 1/2" MOUNTING HOLES MEASURE 2 1/2" CENTER TO CENTER, INSIDE HOLE IS 1 1/2" DIAMETER. Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, ... moreplease let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only.Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) buyer pays return shipping charges. 15% restocking fee will be charged, item must be in same condition as received. refund will be issued within 3 d
|
|
DELCO REMY STARTER# 119767 WITH SSTARTER SOLENOID. 3 BOLT MOUNTING FLANGE. TESTED-WORKS, but because we don't know age/use condition, selling for core/parts/rebuilder. NO VISIBLE CRACKS OR WELDS, DON'T KNOW WHAT IT FITS. BUT TAKEN OFF V8 CHEVROLET TRUCK, STANDARD. OUR ZIP 67108. 25 LBS LARGE FLAT. Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition ... moreor you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) Buyer pays return shipping charges. 15% restocking fee will be charged, item must be in same conditio
|
|
TRACTOR VOLTAGE REGULATOR 12V MOUNTS ARE GOOD STAMPED: PART# 1118 896E. 12V, P, 3G UNSURE OF WHAT IT FITS HAS SOME SURFACE RUSTY. LID IS DENTED/PAINT PEELING OFF, DIRTY. UNTESTED CONDITION IS UNKNOWN, SELLING FOR PARTS/REPAIR/CORE SEE PHOTOS- revised added more pictures of the inside. Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something ... morein pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) Buyer pays return shipping charges. 15% restocking fee will be charged, item must be in same condition as received. refun
|
|
NO TAG BUT LOOKS LIKE DELCO REMY? STAMPED: PS344 ON THE NOSE CONE" R2261 ON THE BODY" 3 BOLT MOUNTING FLANGE. UNTESTED, TURNS FREELY. NO VISIBLE CRACKS OR WELDS- THERE IS A WELD LINE BUT NOT SURE IF THIS IS FACTORY OR NOT, TIN BRUSH COVER IS DENTED. DIRTY. UNSURE IF IT WORKS OR NOT, OR WHAT IT FITS. SELLING FOR CORE/REBUILDER. REVISED SCRAPPED IT OFF AND TOOK MORE PICTURES. OUR ZIP 67108. 38LBS BOX 17X7X7. Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ... moreask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll be happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not includ
|
|
DELCO REMY# 1107889. SN# 1K9, 3 BOLT MOUNTING FLANGE. UNTESTED, DOES NOT TURN. NO VISIBLE CRACKS OR WELDS, UNSURE IF IT WORKS OR NOT, OR WHAT IT FITS. WITH STARTER SILINOID. SELLING FOR CORE/REBUILDER. OUR ZIP 67108. 26 LBS LARGE FLAT. Additional Notes Payment is due in 7 days. But Ebay will send a payment reminder in 4 days, which automatically opens an unpaid case. On the 8th day, if item is not paid, I will re-list it. Please ask questions prior to purchasing. Unless I take it off a specific vehicle/tractor. I am not positive of years/make/models it fits, make sure you are purchasing the correct part you need, ask questions before purchasing. I do my best to describe problems, but if you have ANY doubts about condition or you see something in pictures not noted, please let me know, I'll ... morebe happy to double check. Redhill Salvage has no warranty implied or assumed. Items are sold as is, in condition shown in pictures. If only 1 picture is shown, and you want clarification of item description, please request more pictures. Due to bulk listing editing, some of the conditions are not correct, if in doubt, or if you see a discrepancy please let me know, and I will double check the listing. Let me know if you need something measured, or more information, I would be happy to help. I combine shipping, I will ship by by either USPS or FedEx, at my discretion. Larger items are calculated by dimensional weight. Some items are too large to ship and I will need to get a rate quote from a freight broker, will need to know your zip code, if residential or commercial address, and if a lift gate truck is needed to unload from trailer. Do not pay until you are invoiced for shipping unless its local pickup only. Return Policy You may return this item within 14 days from when item was shipped to you for a refund of item price only(does not include shipping) Buyer pays return shipping charges. 15% restocking fee will be charged, item must be in same condition as received. refund will be issued within 3 days or receiving it back
|
|
|
Ferguson TO 30 Right Hand Hood Emblem We accept Paypal. Thanks for looking I will not be available to ship from 3-28 thru 4-3 Sorry!
|
|
|
MASSEY FERGUSON MF 50 WHEEL REAR TIRE RIMS 12.4-28. NOTE NO CENTER* SIZE: 12.4-28 OK CONDITION AS SHOWN IN PICTURES. WORKED FINE. BUT NOTE MODERATE SURFACE RUST. ALSO NOTE 1 HAS BEEN REPAIRED(SEE LAST PICTURES) PLEASE SEE ALL PICTURES TO JUDGE FOR YOURSELF. NOTE YOU'RE ONLY GETTING THE RIMS. NO TIRE OR INNER HUB INCLUDED* MUST PICK UP IN CINCINNATI AREA. PAY WITHIN 5 DAYS. AND WE CAN HOLD FOR UP TO 90 IF NEEDED* MANY MF50 PARTS FIT TO30 TO35 35 F40 MH50 135-I DO NOT KNOW WHICH ARE INTERCHANGEABLE. AND YOU MUST MAKE THE DETERMINATION IF THIS PART WILL FIT ON YOUR TRACTOR. WE ARE PARTING OUT AN ENTIRE MF50 AND LISTING ALL PARTS. I accept money order/check payments. I combine shipping the best I can.
|
|
|
Part came off a H Farmall with a drawbar.
|
|
You are bidding on a used. Vintage Marvel carburetor. This is made out of cast steel and brass. This is a very old carburetor. The butterfly still moves back and forth. It is missing the butterfly plate. The casting number on the outside is H2E. The linkage arm for the butterfly on the very tip is broken off but I don’t think this will affect the use of it. The speed adjustment appears to move o.k. It is not stuck. There are some screws loose on the carburetor and a plug missing on the bottom out of the brass piece. The choke assembly presently does not move. This carburetor will need to be completely restored. A very small butterfly on the back side of the carburetor does open and close and it is linked to the main part of the carburetor itself. This item is sold as-is. Be sure to ask questions ... morebefore buying. I ship to the U.S.A only. Accepted payment method is Paypal with a Confirmed Address only. PLEASE NOTE: OHIO RESIDENTS WILL HAVE SALES TAX ADDED TO THEIR TOTAL. Please note that I ship Monday through Friday only. Not Saturday or Sunday. I usually try to ship within 24 hours of your payment unless your payment is received on a Friday in which case it will be shipped the following Monday. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases!
|
|
A Large Pulley. fresh barn find. Weighs over 25 pounds. 3 inches wide. 2-1/2 Deep belt path. As found in A Clark county Iowa Farm Barn. Thank you for your time. 14 day no questions asked money back. You like them or you don't own them. Please be sure to check out my many other vintage Craftsman hand tools; I have several of the first sockets to grace the wonderful name of Craftsman. Many others made by New Britain(and some made in the ole Husky Facility) Moore Drop Forging, others. Most are pre 1947. Also MAC, Snap on, Craftsman, Proto, AND Williams sockets. I have many 3/4 inch and 1 inch drive tools. Check out my! I do not charge any handling or processing fees on this item; Only the actual shipping fees. I use Flat rate almost always. Thanks again. Important: I ALWAYS SHIP OUT THE NEXT ... moreBUSINESS DAY after confirmed PayPal Payment and I only accept PayPal. My number 1 goal is customer satisfaction-I strive for All 5 star ratings-if you feel that I have not earned that. Please contact me and I WILL make it right. Please leave positive feedback WHEN YOU SAFELY RECEIVE your item& then I will know that you are satisfied. See my feed back and bid in confidence. Do not hesitate to ask any questions and look at all pictures, they will tell the story better than I can. Good Luck and happy bidding.
|
|
You are bidding on an original. Used Wisconsin Engine Zenith Carburetor with Elbow. This attaches with the elbow right to the engine itself. It does have a linkage arm still on it. The butterfly has a little play in it and it may need a new shaft put in but it could still be used. The carburetor choke is stuck. It will need to be unfroze. It has a small cable that could be used to open and close the choke. This will need to be completely disassembled and rebuilt. I have not tested the item. It also has the original bracket for the air intake. It doesn’t appear to have any cracks in it. This item is sold as-is. Be sure to ask questions before buying. I ship to the U.S.A only. Accepted payment method is Paypal with a Confirmed Address only. PLEASE NOTE: OHIO RESIDENTS WILL HAVE SALES TAX ADDED ... moreTO THEIR TOTAL. Please note that I ship Monday through Friday only. Not Saturday or Sunday. I usually try to ship within 24 hours of your payment unless your payment is received on a Friday in which case it will be shipped the following Monday. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e0e109d79-0xf6-
|
|
Vintage CASE Tractor Seat. Hinge Tilt Tip, UNKNOWN USE Description Nice Pan Seat. Unknown what this Came from, I Got it in on a Ingersoll Lawn Tractor, They had it Welded,I Cut the Welds with an Air Hammer Nice Restorable Pan Seat If this is your First Auction. We will do our best to help you get through this with a Positive Experience! Thanks Myron& Marcia A. PayPal or Personal Check is Fine. CASH Works too, Scroll Down for More Pics Make it a Great eBay Day Payment We Try to find the Best Items to List for your Bidding Pleasure.Please Bid wih Confidence and Most Important Have Fun. Payment must be received within 4 days of auctions end or a non-paying alert will be issued. I understand that circumstances do arise and therefore would expect e-mail communications if there are any problems. ... moreShipping THANKS FOR VIEWING THIS AUCTION AS ALWAYS WE LOVE TO COMBINE SHIPPING. We ship with in 2 business days. We strive to describe items we are auctioning as accurately as we can. Should you ever purchase from us and find we did not do so. Please let us know so we can continue to improve. We will usually ship within 2 business days of receiving cleared payment. Terms of Sale Return policy details: If an item is found to be incorrectly described in a manner as to be considered materially deficient. We will gladly accept the return at our expense. We realize that on-line shopping is a difficult experience and try to be fair to our customers as well as ourselves. Thank you Marcia& Myron About Us HI. We are Myron and Marcia Our main goal is to make people happy with their purchase and we pride ourselves on our fast shipping. We try very hard to treat other people the way we would like to be treated. EBay is a great hobby. There are many very nice people in the Ebay Community! Thank you for stopping in and have a Great Ebay Day! Contact Us Email with any Questions you have. We will try to answer all of them. We want only Questions about the item, Thank you Myron and Marcia MAKE OFFERS. BUY MORE, SAVE MORE ON SHI
|
|
up for auction is a case sc brake assembly. sold as is. Ask any questions before bidding. Check out my other items! Be sure to add me to your favorites list! COMBINED SHIPPING: if a buyer wishes to purchase multiple items. I will combine shipping within reason. In these cases, buyers are instructed to ignore posted shipping, and I will recalculate shipping based on the new combined weights AFTER THE AUCTIONS ARE OVER. The fine print: these are old tractor parts. 60 to 70 years old in some cases, not new ones. Please expect such. Do not expect new, perfect parts. No refunds. Unless I have severely erred somehow. Email policy: please be kind with emails. No rudeness. Kindness begets kindness, rudeness begets rudeness. My actual email i s mdmurphy1 at peoplepc dot com if you are having trouble ... moreemailing me. Please be aware of SPAM FILTERS! If you have a hotmail. Msn, yahoo, netzero, AOL, and some other email accounts, please check your spam filter regularly. I email every one who emails me, and many times I have to resend emails many times as people do not check their spam filters, and emails get routed to those filters very often. Shipping: if the part is small. I will ship it postal flat rate. If it’s large, I will ship it UPS. I generally ship all my UPS stuff once a week, on Monday or Tuesday. I am a one man band, and it takes lots of time to package up parts. I do the best I can. Feedback: feedback is left after it is received. If you wish to receive feedback from me. Please leave positive feedback for me upon completion of the transaction. On Aug-26-08 at 18:26:16 PDT. Seller added the following information:
|
|
|
SHOWS USE AND AGE SOME RUST& SOME PITTING, NO BREAKS OR WELDS, NEEDS SOME CLEANING SHIPPING COST $ 5.75 I DO COMBINE SHIPPING COST IF YOU BUY 2 OR MORE ITEMS AND I CAN FIT ALL IN ONE PACKAGE JUST ASK AND I CAN TELL YOU ALSO I WILL SHIP MOST ALL INTERNATIONAL, JUST ASK FIRST AND PAY ALL AUCTAL SHIPPING COST TO YOU COUNTRY ALSO IF YOU SEE ITEMS ENDING AT A LATER DATE YOU LIKE, WAIT TO PAY THANKS AND HAVE FUN, TRAPPER Powered by The free listing tool. List your items fast and easy and manage your active items. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e0e532e69-0xfe-
|
|
|
VINTAGE JI CASE 119 4 TRACTOR FUEL FILTER ASSY Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Note- Buyers outside continental US will incur additional shipping expense, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
THIS IS A GOOD RIM.ITEM SOLD AS IS. Locations outside continental US will incur a shipping expense. To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e0e6a7d69-0xfd-
|
|
|
VINTAGE JI CASE 119 4 TRACTOR ENGINE VALVE COVER Off 19 84 1194 Model Tractor. Used parts, Used original Case item, Use as is or refinish for your parade tractor.To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks
|
|
|
AUCTION IS FOR 530 CASE DISTRIBUTOR TRACTOR WAS A GOOD RUNNING TRACTOR BUT SMOKED THANKS
|
|
|
VINTAGE JI CASE TRACTOR AIR CLEANER HOUSING off 1950 DC Tractor. Used parts, Used original Case item, Note- buyers outside continental US will incur a shipping charge, To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13e0e6a807c-0xf8-
|
|
|
TURNS BY HAND.ITEM SOLD AS IS. Locations outside continental US will incur a shipping expense. To see other tractor parts, farm collectibles or Original manuals- Check our Ebay store, Thanks, NOTE- Bidders outside the USA need to be prepared to do payment by paypal. thanks. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13e0e6a7cd2-0xfe-
|
|
Vintage Gauge Auction is for a Great Vintage Gauge from H e licoid This is there Size 6 Torque Gauge for A& W Tractor Products I Ha ve absolutely no idea what it does exactly but look at the pictu res or hopefully you know already as there are none of these on eBay that I was able to locate. I also have no idea if it is working correctly so it is sold As Is fo r that reason. It comes with the original box but it is dirty so it had to have been used Measures: 7.25" Tall x 7.25" wide x 2.25" deep If you need any other information please email us and we will get back to you promptly. Don't miss out on this one! Note: We do not clean any of the items we find because we do not want to ruin them in our ignorance. So we base alot of our cleanliness rating on the age of the ... moreitem and it's overall appearance. Some items like toasters and other food appliances will always need some cleaning they will never look brand new unless they are. So please keep in mind the age of the item when we state how clean the item is in our listing. Shipping: $9.95*Combined Shipping Discounts Available* ATTENTION INTERNATIONAL BUYERS"Import duties. Taxes, and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up- do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Good Luck& Happy Shopping! Your Place for Southern Living at Home& Decorative Accessories Your link to Money Saving Discounts. Newsletter delivered right to your email inbox! Sign up now by clicking the link above- My Policies: About Us: His& Hers Collectibles is a company based on buying and selling t
|
|
You are bidding on a vintage. Small, used Tractor or Car Generator. I don’t see any actual part numbers on it. It does have a voltage regulator on top. I don’t know if it works or not. It does spin freely. The inside dimension between the two ears approximately 5-11/16ths. This generator is in original condition. The brushes sound like they are still hitting. It will need cleaned up. It has a shaft diameter on the end of approximately.668. It is keyed for a Woodruff Key. This is made out of cast iron. I have never tested this item. Buyer pays all shipping costs. I ship to the U.S.A only. Accepted payment method is Paypal with a Confirmed Address only. PLEASE NOTE: OHIO RESIDENTS WILL HAVE SALES TAX ADDED TO THEIR TOTAL. Please note that I ship Monday through Friday. Not Saturday or Sunday. ... moreI usually try to ship within 48 hours of your payment unless your payment is received on a Friday in which case it will be shipped the following Monday. I try to ship Priority Mail because it gets to you the customer faster. But I do use First Class Mail also.
|
|
Massey Harris Valve Guides for a 44-6 or 101 Sr. Part# 840 211 M91 N.O.S. They have may have some light rust on them. From being in storage for so long. Still in original box. Item sold as is. Be sure to check out our other items For Sale or Buy it Now! We try to put something new on everyday! Shipping: We will combine shipping if you purchase more than one item. Insurance and Delivery Confirmation is added to every package. Payment Instructions: We will ship to the address E-Bay gives us on the invoice, unless other arrangements have been made the day of the sale. Please wait for our invoice to pay. Not the purchase order you receive from E-Bay. We may be able to save you some money on shipping. Returns: If you feel this item was" Not as Described" or was damaged in shipment. Please ... morecontact us within 14 days for a Claims Resolution. Insured items th at are damaged during shipping will be refunded in full. Immediately upon recieving the Insurance Claim payment by Postal Carrier. Feedback: I will give automatic Feedback upon prompt payment. Please leave positive feedback if you are satisfied with your purchase. If there is a problem. Please contact me so it can be addressed prior to any Negative Feedback.
|
|
This is for a Massey Harris Rear Rim. 10- 38. This is a good rim, light rust, no holes or dents. All the lips are good. This item is for local pick-up. Unless you arrange for a truck to pick it up. I can load the item. Shipping: We will combine shipping if you purchase more than one item. Insurance and Delivery Confirmation is added to every package. Payment Instructions: We will ship to the address E-Bay gives us on the invoice, unless other arrangements have been made the day of the sale. Returns: If you feel this item was" Not as Described" or was damaged in shipment. Please contact us within 14 days for a Claims Resolution. Insured items that are damaged during shipping will be refunded in full. Immediately upon recieving the Insurance Claim payment by Postal Carrier. Feedback: ... moreI will give automatic Feedback upon prompt payment. Please leave positive feedback if you are satisfied with your purchase. If there is a problem. Please contact me so it can be addressed prior to any Negative Feedback.
|
|
FORD 2N.8N,9N, JUBILEE,NAA, FUEL VALVE& SEDIMENT BOWL Click to Enlarge Click to Enlarge FORD 2N.8N,9N, JUBILEE,NAA, FUEL VALVE& SEDIMENT BOWL GOOD USED CONDITION COMES AS SHOWN IN THE PICTURES Any Questions. Please send us an eBay message. See more SHIPPING INFORMATION. We Ship With: UNITED STATES POSTAL SERVICE OR UPS This Item Ships To: Continental 48 US, Alaska& Hawaii, I GENERALLY SHIP within the United States. CONTACT US BY EBAY MESSAGES IF YOU ARE INTERESTED AND LIVE OUTSIDE THE UNITED STATES. ALL OF MY SHIPPING IS CALCULATED BY ESTIMATED WEIGHT IF YOU HAVE AN ISSUE WITH YOUR SHIPPING COST CONTACT US BY EBAY MESSAGES WE WILL ARRANGE REPAYMENT OF ANY OVERCHARGES, The shipping rates listed are only for residential or commercial destinations in the continental 48 United States. ... moreIf we ship to other locations it will be listed and it will require an additional shipping charge. Please ask us if there are any questions. We only ship the item to the Paypal Verified address that is sent to us at the time of checkout. Please verify the correct shipping address in your PayPal account before making your payment. If we ship your item to an old or invalid address and you are not able to locate the item. We are not responsible for shipping a replacement. Most of our items are shipped via UPS or USPS mail. WE DO NOT OFFER FED EX AT THIS TIME. Shipping time during holidays may take longer than normal. Many of our items can be shipped 2nd Day and Overnight. Overnight charge is always double of the second day charge. Regardless of what the listing states. If the listing indicates otherwise, please ask us first. For expedited shipping. The order must be placed before 1pm Eastern Standard Time to insure that your item goes out that day, otherwise it will leave the following day. Most of our orders ship within 1 business day. 99% of our order ship within 2 business days. Occasionally. Specific orders will require additional processing time and may be delayed further. International Orders. For International customers.
|
|
up for auction is a farmall 340 set of connecting rods. one rod cap is missing. I dont have it. part number is 367774R1. sold as is, ask any questions before bidding. Check out my other items! Be sure to add me to your favorites list! COMBINED SHIPPING: if a buyer wishes to purchase multiple items. I will combine shipping within reason. In these cases, buyers are instructed to ignore posted shipping, and I will recalculate shipping based on the new combined weights AFTER THE AUCTIONS ARE OVER. The fine print: these are old tractor parts. 60 to 70 years old in some cases, not new ones. Please expect such. Do not expect new, perfect parts. No refunds. Unless I have severely erred somehow. Email policy: please be kind with emails. No rudeness. Kindness begets kindness, rudeness begets rudeness. ... moreMy actual email i s mdmurphy1 at peoplepc dot com if you are having trouble emailing me. Please be aware of SPAM FILTERS! If you have a hotmail. Msn, yahoo, netzero, AOL, and some other email accounts, please check your spam filter regularly. I email every one who emails me, and many times I have to resend emails many times as people do not check their spam filters, and emails get routed to those filters very often. Shipping: if the part is small. I will ship it postal flat rate. If it’s large, I will ship it UPS. I generally ship all my UPS stuff once a week, on Monday or Tuesday. I am a one man band, and it takes lots of time to package up parts. I do the best I can. Feedback: feedback is left after it is received. If you wish to receive feedback from me. Please leave positive feedback for me upon completion of the transaction. On Aug-26-08 at 18:26:16 PDT. Seller added the following information:
|
|
McCormick Mower Swathboard Part# M972 N.O.S. Manufactured by: R. Herschel Mfg. Co. Peoria. IL Item sold as is. Be sure to check out our other items For Sale or Buy it Now! We try to put something new on everyday! Shipping: We will combine shipping if you purchase more than one item. Insurance and Delivery Confirmation is added to every package. Payment Instructions: We will ship to the address E-Bay gives us on the invoice, unless other arrangements have been made the day of the sale. Please wait for our invoice to pay. Not the purchase order you receive from E-Bay. We may be able to save you some money on shipping. Returns: If you feel this item was" Not as Described" or was damaged in shipment. Please contact us within 14 days for a Claims Resolution. Insured items th at are damaged ... moreduring shipping will be refunded in full. Immediately upon recieving the Insurance Claim payment by Postal Carrier. Feedback: I will give automatic Feedback upon prompt payment. Please leave positive feedback if you are satisfied with your purchase. If there is a problem. Please contact me so it can be addressed prior to any Negative Feedback. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e10281fdd-0xf0-
|
|
This is a E-3 Coop or Cockshutt 30. I'm not sure of the year. The wide front looks good except the pipes for the tie rods are getting rusty and I see one has some weld. Otherwise I don't see any welds or damage(front end) Tires are shot. Rear rims look solid. One is rusty on the inside bead. Beads are bent up some. One front rim is bad. Tractor has PTO and rear hydraulic lift. Missing grille. Tin work is rusty. Nose is beat up. There is some rust hole in the fender, mainly pretty solid. No seat pan.Engine block looks cracked. I don't think the motor is loose. Tractor is pretty much complete just rough. From the research I've done, wide fronts are rare. Good for parts of restoration. Tractor rolled fine when loaded on and off the trailer.Steering is tight on top. I'm going ... moreto soak with penetrating oil.I don't know much about this tractor so If you have any questions please ask. I will do my best to answer them for you. Must be picked up within 30 days or deemed abandoned. Must also payed for within 7 days. The serial number is 30 27808. This is being relisted because the previous buyer backed out of his purchase because he said he pushed the wrong button.
|
|
|
International Cub 154/184 LoBoy tractor rear fenders. The sale is for 1 left and 1 right fender. Fenders are fair to good condition. PLease contact me with any questions. Thank You
|
|
|
Here's a huge. Estate sale find, International Harvester Tool or Implement Part, stamped on one end NSG or N5G. On the other end is the I H Logo. It is approx. 23 1/4" long, shaft is approx. 1" dia. at center. I have no idea what it is so I'm selling it As Is, What Is, All Sales Final. Someone thought it may be a threshing Machine Wrench? You be the judge. No date on it but appears old, dark patina and use marks. No Reserve
|
|
|