|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New – Open box Location: Chino, United States
Power: 550W. Compatible with oil, diesel, bio-diesel or kerosene. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances! Pump type：Diesel pump.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
125VDC Panel Mount Breaker - 3/8" studs. AIC 50,000 at 125VDC. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Always use a properly sized breaker for disconnecting.
Buy It Now
Free Shipping
Condition: New Location: Detroit, United States
12-Volt 35Ah AGM Deep Cycle. Capacity(Amp Hours @20-Hr Rate): 35Ah. VMAX V35-857. VMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte.
0 bids Free Shipping
Condition: New – Open box Location: Pueblo, United States
Still sealed in its bag. These were use for off grid wind tower battery banks. One complete kit and a bunch of extras from another kit. All rubber is pliable. Please look at all the photographs carefully. We are happy to answer any questions you have. We love to combine shipping, so check out our store, Hippie Cat Bargains. Please feel free to make an offer, we consider them all.
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
Morningstar SunGuard Datasheet. Morningstar SunGuard Operator"s Manual. Morningstar SunGuard Bench Testing Instructions. Morningstar SunGuard Field Testing Instructions. Morningstar SunGuard Quick Test Checklist.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Morningstar SunLight™ SL-10L-24V Charge Controller Morngstar's SunLight is the world's leading solar lighting controller. We have combined all the advantages of our SunSaver charge controller with some unique lighting control features. ---Includes all the advantages of the SunSaver charge controller. Please refer to SunSaver product information for more details. ---Unique Lighting Control Features ------Using solar array voltage to determine day and night, the SunLight provides 10 different lighting control options. ------By measuring the length of the night, the SunLight's ON/OFF/ON options provide the capability to turn on the light at sunset, turn off the light after 3 to 6 hours, and then turn on the light again for 1 or 2 hours before sunrise.
0 bids Free Shipping
Condition: New Location: 乐清市, China
Circuit Breaker. Monitoring Relay. Current Monitoring Relay. Solid State Relay. Electromagnetic Relay. PV Soler <-> City Power. 2PCS DC 15A FUSE+Socket. Maximum input current for each string 15A.
Buy It Now
Free Shipping
Condition: New Location: , United States
Drum Size:200 L(55Gallon). Fits most 55 gallon drums.Ideal for heating up WVO for settling or processing biodiesel. 1pc s Silicon heater(the drum not included). Heating Power:1000W. Compressive strength: 1500V / 5S.
0 bids Free Shipping
Condition: New – Open box Location: Fresno, United States
#5 housing 6 1/2 drive. for small gas or diesel engine-includes rectifier.
Buy It Now
Free Shipping
Condition: Used Location: East Syracuse, United States
Included 1x PlugPower GenDrive 2440-36. Hydrogen Storage 1.1kg. Significantly Reduce Peak Power Demand - Demands for high-cost electricity eliminated. Pressure 350 bar. Reduce Site Emissions - Safe, clean, zero emission power sources.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids $6.00 Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
Midnite Solar MNPV-DISCO MNPV Disconnecting Combiner Box MNPV6 DISCO COMBINER Please Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
MIDNITE SOLAR MNEPV40 CIRCUIT BREAKER 40A 150VDC 1-POLE DIN MOUNT Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. 150VDC din rail mount breaker (13mm wide).
0 bids Free Shipping
Condition: New Location: Roanoke, United States
Midnite Solar Panel Mount Circuit Breaker 40A, 150VDC *Image on listing is a standard product image provided by the manufacturer. This listing is for the 40A breaker. Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. 40 amp 150VDC Panel Mount Breaker, 10,000 AIC UL & CSA Listed 1/4" studs 3/4" wide.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
MIDNITE SOLAR MNEPV3 CIRCUIT BREAKER 3A 150VDC 1-POLE DIN MOUNT Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. 150VDC din rail mount breaker (13mm wide).
0 bids Free Shipping
Condition: New Location: Roanoke, United States
MIDNITE SOLAR MNEAC10 10 AMP AC DIN RAIL MOUNT BREAKER 10 Amp 120 VAC din rail mount breaker (13 mm wide) 10,000 AIC Note: UL489A is the branch circuit rating, UL1077 is for supplementary protection.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Click here to see description.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
These mount on standard 35mm DIN rail. ETL listed for USA and Canada.
0 bids Free Shipping
Condition: New Location: Providence, United States
28 rpm, and the Slew Drive ( 110Lb total). Key attributes. Gear Ratio. Rated Output Speed. Radial Static Load. Axial Static Load. Radial Dynamic Load. Axial Dynamic Load.
0 bids Free Shipping
Condition: Used Location: Rome, United States
It’s equally useful for PV, passive hot water, roof mount or ground-mount systems. Passive solar house design and green architecture. Solar panel system design and installation. Charging Cable(s) USB & Wall for Unit.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Morningstar Corporation MSC-PC Meterbus Adapter (MSC) Morningstar's PC Meterbus Adapter (MSC) converts a controller's meter port (RJ-11 phone type connector) to a standard RS-232 serial connector for connection to a PC or other equipment. The MSC may be used with any Morningstar controller or inverter equipped with a meter connection that does not also already have a RS-232 port. By converting to RS-232, the MSC allows Morningstar's controllers and inverters to communicate with a variety of third party serial enabled devices such as: ---A PC running Morningstar's MS View software or any other compatible software. ---A serial enabled device such as an internet gateway. ---Another MODBUS enabled hardware device at the site that needs to access solar system information.
Buy It Now
Free Shipping
Condition: New Location: Greenville, United States
GRAINGER APPROVED Drum Heater: 115V AC, 1,500 W Watts, 50°F to 400°F, For 55 gal Drum Capacity. For 55 gal Drum Capacity. 1,500 W Watts.
Buy It Now
Free Shipping
Condition: New Location: Cle Elum, United States
Suitable for use in agricultural, mining, logging and construction applications even with the high levels of fuel sulfur. Heavy Duty Diesel Engine Oil. Engine Type: Diesel. Oil Type: Heavy Duty. Product Type: Engine Oil.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
0 bids Free Shipping
Condition: New Location: 乐清市, China
Zhejiang Geya Electrical Co., Ltd. We have more than ten years of production experience and have CE, CB and other international certifications. Customization service is also provide. Mini Circuit Breaker.
0 bids Free Shipping
Condition: New Location: Chino, United States
Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel. 7: After closing the gun, switch off the motor pump as quickly as possible.
0 bids $10.00 Shipping
Condition: New – Open box Location: Chino, United States
16GPM Self Priming Portable Electric Oil Pump Transfer Fuel Diesel 110V AC 550W. Compatible with oil, diesel, bio-diesel or kerosene. Do not use the diesel pump and fuel oil pump for pumping water, gasoline or flammable, volatile substances!
0 bids Free Shipping
Condition: New Location: Roanoke, United States
MidNite Solar Busbar w/Ground MNGBB(Midnite Short Busbar) Shorter version of the insulated bus bars. These are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for charge controllers that require them. Four #6 and two 1/0 wire slots.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
Midnite Solar DIN Mount Circuit Breaker 10A 300VDC 1-POLE DIN MOUNT Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. 300VDC din rail mount breaker. 10,000 AIC MNEPV breakers are the same as CBI QY breakers, and have been evaluated by ETL to 300VDC and are listed for US and Canada. Breaker Torque Value: 20 In-Lbs (2.3NM).
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Morningstar Corporation Remote Digital Meter TS-RM-2 (mounted in remote location) for TriStar Charge Controllers The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meters enable manual functions and controller diagnostics. These capabilities will increase your confi dence that the system is working properly and will help you to improve system reliability, battery life, and system performance.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
125VDC Panel Mount Breaker - 3/8" studs. AIC 50,000 at 125VDC. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Always use a properly sized breaker for disconnecting.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Zephyr Power Vent 48V Battery Box Ventilator & Back Draft Damper Why use a POWER VENT? ---Positive venting of hydrogen gas. ---Stops back drafting. ---Puts the smell outside. ---Keeps batteries warmer in cold climates. ---Uses very little power. ---Excellent results for over four year The Zephyr POWER VENT was designed for use in remote home power systems. The concept arose from field experience of systems with enclosed battery boxes. Quite often the NEC required venting was found back drafting, thus cooling the battery bank and lowering its' capacity as well as venting hydrogen gas into the structure. The POWER VENT alleviates this condition by keeping a gravity operated damper closed within the vent pipe except at times when the batteries are being charged and producing hydrogen gas.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
MIDNITE SOLAR MNEAC30-2P 30AMP AC TWO POLE DIN RAIL BREAKER 30 amp din rail mount 120/240 VAC Branch circuit rated 489 two pole. 10,000 AIC. MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers hold 100% rated current independent of ambient temperature. Listed for US & Canada.
0 bids $6.00 Shipping
Condition: New Location: Chino, United States
Voltage: 110v/60hz Current: 6.6a Power: 1100w Capacity: 55 Gallons (208.2 Liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 X 88 Cm Thickness: 1'' The Package Includes: 1x Drum Thermal Blanket.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
MidNite Solar Terminal Busbar MNTBBB (BLACK) Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws. Bus Bar: 4.63" UL and CSA recognized, Made in USA. Insulators ETL recognized, Designed by MidNite Solar and Made in China. Remove the plastic insulators for ground bus applications. A dimensioned drawing is on the MidNite website as "Long MNTB Dimensions". ---Four 1/0 & eleven #6 useable wire slots. ---180 amps. ---Comes with two lengths of 10-32 screws. ---Both copper and aluminum wire is acceptable for use with these busbars. ---Tin plated aluminum. ---Listed for US and Canada.
0 bids Free Shipping
Condition: New Location: , China
25 X 127mm. Engine liquid heater/ 3D Printer Heated Bed/ Lithium battery heater/ Gas Cylinder Heater. - Holes / Eyelets can be added on heater upon request, NO Extra Cost! - CE / UL Certified Heater with One Year Warranty!
Buy It Now
Free Shipping
Condition: New Location: Ventura, United States
Click here to see description.
0 bids Free Shipping
Condition: New Location: , United States
Drum Size:200 L(55Gallon). Fits most 55 gallon drums.Ideal for heating up WVO for settling or processing biodiesel. 1x Silicon heater (the drum not included). Communication, then solution. If you are satisfied with our service, pls.
Buy It Now
Free Shipping
Condition: Used Location: Seffner, United States
Zep Solar MH-007000-639 Double Key Zep Mounting Hardware. See pictures.
0 bids Free Shipping
Condition: New Location: Hayward, United States
125 1740mm(4.92" 68.5") 110v 30~150℃ 200L(53Gallon) 1KW. By heating the barrel, easy to remove coagulum and liquid, as the barrel adhesive, grease, tar, paint, wax, oil, and various resin materials. 1 set of Oil Drum Heater 110v 153157.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Morningstar Corporation Solar Charge Controller (Low Voltage Disconnect) Model: SHS-10 Morningstar’s well-known high quality and reliability is now available in a low cost solar controller. The SHS Controller is ideal for rural electrification systems with one to three solar panels. This controller meets World Bank specifications and provides many features and benefit. Benefits of a Solar Controller: ---Reduces Cost of Battery Replacements: The low voltage disconnect will increase battery life. The loads are automatically disconnected when the battery is low and automatically reconnected after the battery is recharged. Complete charging will increase battery life and storage capacity.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Model: Morningstar TS-60M. “It is a Morningstar, what do you expect! It is great!”. Detailed battery programming options allow for advanced battery support for the latest Lithium, Nickel Cadmium, and Lead Acid battery types.
Buy It Now
Free Shipping
Condition: New Location: Detroit, United States
"The heart of the VMAX is the unique physical and chemical structure of its plates. VMAXTANKS AGM SOLAR BATTERIES. HIGH POWER, AGM 12V SOLAR BATTERY. AGM Electrolyte Suspension System. DRY CELL DEEP CYCLEMAINTENANCE FREE BATTERY.
0 bids Free Shipping
Condition: New Location: Roanoke, United States
Heavy 100 Amp Rectifier with Spade Terminals and Heat Shrink Includes: 1 - Heavy 100 Amp Rectifier 5 - Spade Terminals 3/8 Inch 0.375 UL Listed 5 - 1/2 Inch Heat Shrink Tubing (1 Inch Length) Heavy 100A Rectifier: ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage ---This item is used to convert 3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar Spade Terminals 3/8 Inch 0.
Buy It Now
Free Shipping
Condition: New – Open box Location: Ogden, United States
0 bids Free Shipping
Condition: Used Location: Asheboro, United States
Solmetric Suneye 210. Condition is Used. Shipped with USPS Priority Mail.
Buy It Now
Free Shipping
Condition: New Location: Hibbing, United States
Precision engineered fuel connectors for secure connection to fuel lines.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Power: 550Watts Self Priming. The electric oil pump with a portable handle can make it easier for you to take it to the workplace. The powerful power of 550W can help you finish your work quickly and well.
Buy It Now
Free Shipping
Condition: Seller refurbished Location: , United States
FlashVue Flashing FV-01-M1 Mill Finish FLASHING ONLY NO ACCESSORIES Very Good | Seller Refurbished – May have slight cosmetic scrapes, chips, tattering, and pealing on body, labels, and stamps due to normal wear. May have replacement or missing accessories outside of what makes the item functional. Cleaned and tested. We ship most items via priority mail. Riverside Breakers has been selling online since 2011 and we hold a high rating across all of our selling platforms. Thank you for shopping with us! For additional products please visit our eBay store at the link provided below. https://www.ebay.com/str/riversidebreakersstore Returns: 30 Day returns from the date you received the package. Buyer pays return shipping costs in most cases. FV-01-M1-FLASHING ONLY
Buy It Now
Free Shipping
Condition: New Location: Detroit, United States
12-Volt 35Ah AGM Deep Cycle. Capacity(Amp Hours @20-Hr Rate): 35Ah. VMAX V35-857. VMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte.
Buy It Now
Free Shipping
Condition: New Location: Roanoke, United States
Morningstar Corporation Digital Meter TS-M-2-600V (mounted on controller) for TriStar Charge Controllers The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meters enable manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance. It is worth the time getting to know your meter! The TriStar Meter-2-600V specifically designed for the TriStar MPPT-600V displays extensive system and controller information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting.
0 bids $6.00 Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. High-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
|
|
|
You are bidding on a Sinton Instruments FMT-350 Light I-V Suns-Voc Solar Module Tester System that INCLUDES Dell Computer. Sinton Instruments IVTools Software, ProFoto Acute Lighting with Power& Head, Testing Station Components These units are in good cosmetic and working condition. Recently obtained from a working Solar manufacturing company environment. Please see attached images for detailed view of all items included in this complete Solar Module Testing station. This is a Complete System is an Advanced analysis of solar modules including light I-V and Suns-Voc data. Capability to accurately measure high-efficiency modules. The Complete System includes the following: 1) x Sinton Instruments- FMT-350 Light I-V Suns-Voc Solar Module Tester System Features: One-Sun Flash Module Testing ... moreAnalysis techniques: Suns-Voc curve- 3-point production testing utilizing Suns-Voc. Jsc, Vload- Efficiency versus intensity characteristic- I-V curves at multiple intensities(1) x Sinton Instruments- IVTools_1.29.4_PC.vi Software(1) x Dell Precision Computer T3400 Intel Core 2 Duo E8400 3GHz 1GB RAM 75GB(1) x Profoto Acute 2 2400 Power Pack& 1) Profoto Acute 2 D4 Flash Head(Key Components) National Instruments PCI-6110 NI DAQ Card 4ch 5MS/sec Analog Input(for PC) National Instruments interface cable to FMT-350(Additional Accessories& Components) Power adapters for Computer. Monitor, Profoto Power Pack- SMC MGPM50N-200 Pneumatic Linear Actuator- Control Air Type 700 Pressure Regulator 0-30 Product Overview: Advanced analysis of solar modules including light I-V and Suns-Voc data. Capability to accurately measure high-efficiency modules. FMT-350 measures any crystalline silicon module. Including high-capacitance, high-effciency modules, using patented electronic load technology" src="http:www.sintoninstruments.com/images/spacer.gif" width=150 height=50 Product Overview" src="http:www.sintoninstruments.com/images/spacer.gif" width=150 height=12 The FMT instrument has been designed to have the
|
|
MGI-250 Hydrogen Gas Generator. This gas generator was originally manufactured for the jewelery industry for welding precious metals as it has a neutral flame. Non oxidizing or carbonizing. This was a $40, 000.00 option on a larger semiconductor manufacturing piece of equipment. They have been regularly maintained until removed from service. It can produce a minimum of 250 standard liters per hour at 5 psi. It can be hooked up to pressurized water and run 24/7 as it auto fills and has a built in scrubber to clean the gas of moisture and contaminates so the gas can be burned with a clean almost invisible flame with temperatures up to 6000 degrees F. This system is as removed from service and may need calibration or some service to get running. Service it yourself and save some money or use ... morethe parts for your our serious hydrogen gas experiments. 208-220 VAC single phase power input. You could also use an external DC power source to make gas too This is a complete system to make hydrogen gas. Ask questions before purchasing. Due to several non paying buyers.you must pay in 7 days or the deal will be canceled and you will be reported to ebay.
|
|
Pneumatic Pump STT40:1 has a pressure ratio of 40:1. Uses compressed air from a compressor source to operate. The purpose of the pneumatic pump is to take a source of gas from a lower level of psi and elevate the psi to a required level to operate equipment or to fill a tank. You can use any gas in this pneumatic pump including: Argon. Oxygen, Nitrogen, natural gas, propane Hydrogen, etc. The minimum supply pressure for the compressed air can be 14.5psi to 1450psi which will increase the gas compression to 4350psi on the outlet gas line. The gas inlet is 1/4" connector and the outlet gas connector is 1/4" The compressed air inlet connector is 1/2" This model has one interior chamber and two anterior chambers. Our regular price is $4999.00. Our competitors price is over $5999.00. ... moreThis is a used item and the price is $2495.00. Size: 21"L x 10"H x 7"W. Special Sale: $1295. 50% below cost. For use with H2 and other gases. Fill your own tanks with compressed Hydrogen fuel or some other type of gas or fuel.
|
|
|
ORIGINAL AND RARE 1940 FIRST EDITION EIGHT IMPRESSION(SMALLER THEN THE TENTH IMPRESSION) BOILER OPERATOR'S GUIDE CONSTRUCTION. OPERATION. INSPECTION AND MAINTENANCE OF STEAM BOILERS, WITH 310 TYPICAL STEAM ENGINEER'S EXAMINATION QUESTIONS AND ANSWERS BY HARRY M. SPRING. JR. PUBLISHED MCGRAW HILL BO O K COMPANY. INC NEW YORK AND LONDON 1940 THE PURPOSE OF THIS BOOK IS TO SUPPLY A MODERN HANDBOOK SPECIALIZING ON BOILERS AND BOILER EQUIPMENT. 353 PAGES ARE INDEXED WITH ILLUSTRATIONS AND INSTRUCTIONS BOOK IN VERY GOOD SHAPE ORIGINAL OWNER S NAME IN FRONT OF BOOK BLANK PAGE HARDCOVER
|
|
|
The GE Panametrics CGA 351 oxygen analyzer utilizes an zirconia sensor to determine oxygen content in process gases. Microprocessor-based electronics allow the GE Panametrics CGA 351 oxygen analyzer to take measurements from ppm levels to 100 percent oxygen.
|
|
This is a system controller for a solar water pump by Dankoff. This is the controller only. Found in the Dankoff ETAPUMP Integrated Solar Pump System ETA-04-300. The casing of this controller has some scratches and scuffs. But as a whole the unit looks like it's rugged for tough environments. There are 8 sets of wires coming out of the unit for a length of nearly 4 feet. Examining all of the screws around the case. And the gaskets of the case, it does not appear that it has ever been opened or tampered with inside. The power button feels responsive. It is noted that there are no user serviceable parts inside. I am selling this in the expectation that this should be a replacement controller. As we do not have the full system. We are unable to fully test. We recommend fully testing yourself ... moreduring the refund period. We can not process refunds if the unit has evidence of being opened. Measures 15.5" tall. 7" wide, and 6" deep. Weighs a hefty 10 lbs. I do not have any manuals. Our policies: Please pay within 3 days of your purchase. We only ship within the United States. We ship USPS with delivery confirmation and tracking. We offer FREE shipping. We cannot offer discounts for multiple purchases. We have a 14 day refund policy. If a problem arrises with your order. Let us know immediately so we can take action. Return shipping is the responsibility of the buyer. Once you've happily received your items. Remember to take a second and leave us feedback. It is our policy to leave feedback for our buyers once feedback is left for us because this is the best way to know that a transaction is happily completed. If there are any questions or special circumstances. Let us know as soon as possible. Communication is the key to preventing bad experiences. We make every reasonable attempt to provide a clear and accurate description. Additional pictures can be made available on request. If there are any errors in our listings. Send us a quick note so we can take action.
|
|
Solmetric Suneye 210 Solar survey tool Item: PV Solmetric Suneye 210 Solar Survey Tool for analysis of shading& solar access comes with user manual, software CD, lense cap, USB cable, AC charger, This is pretty much the latest& greatest when it comes to solar analysis. A must have tool for every solar professional in order to be able to calculate the projected or expected solar access and shading at a given location. For more info. Please visit Condition: Used. 100% functional and in very good condition. Nicey's accepts payment through Paypal. Nicey's uses either USPS(United States Postal Service) or UPS for domestic shipping. Determined by which is more cost effective. We will combine shipping charges on multiple auctions. Discounts will be reflected on invoice sent at end ... moreof auction! Nicey's uses UPS when: A package weighs more than 13 oz A package needs to be insured for more than $200.00 When a package is shipped to a business(regardless of size) By customer request, Quoted UPS Shipping costs will always include insurance.we promise there will be no surprise surcharges after the auction ends. A Tracking number will be emailed to you as soon as your package is picked up by our UPS representative. Nicey's uses USPS when: A package weighs less than 13 ounces when packaged and is insured for less than $200.00 When Shipping to a PO BOX(If your item is weighs more than 2 LBS. Nicey's will email you requesting a residential address for UPS shipment) By Customer Request, All Packages shipped USPS will be sent with a Delivery Confirmation. Insurance is included in the shipping and handling fee. An Email will be sent to you with a tracking number once we print your shipping label via PayPal. Tracking Email is N/A if paid by check or M/O) Local Pickup: Local Pickup is always encouraged.and its free! Our address is 12 Park Drive. Bridgeton NJ 08302. Google a map and see if it is worth your while! International Shipping: Sorry. But there is NO International Shipping Offered on this Auction! Ple
|
|
Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest, Amphenol Helios H4 Male Female Solar Connection Cables- Lot of 50- NEW Cables lengths are TUV 2.5mm Radox solar power cable 15 x 12" lengths w/ male H4 to panel connection 15 x 12" lengths w/ female H4 to panel connection 20 x 30" lengths w/ panel to panel connection All cables are new. PAYMENT: Payment is due upon receipt of your invoice. We accept PayPal payments and all major Credit Cards during the checkout process. We do not collect credit card or personal information. COMBINED SHIPPING: We always adjust shipping costs for multiple items paid for and shipped within the same business day. Items or quantities requiring multiple packages may not receive ... morea discounts on shipping. SHIPPING: We ship using UPS and the US Postal Service(USPS) We do allow customers to use their own UPS account for overnight or special shipping situations. A packaging fee may be applied to your invoice. It is your responsibility to provide a deliverable ship to address at the time of purchase. Most orders are shipped same day with the exception of freight. Overnight Shipments: We can accommodate most requests. It is recommended that you make your purchase and payment before 3 PM MST. We do not refund overnight shipping costs. A valid phone number is required. Overseas Shipments: We ship USPS Priority Mail International in most cases. Each country has its own unique weight and size restrictions when using USPS. IF your package is over the USPS limits for your country. We will quote you UPS costs. Delivery times vary per country, we do not guarantee delivery times or how long the host country holds a package in customs. we have seen shipments via USPS take as long as 6 weeks. We do not allow self shipping and carrier pickup on non freight packages; we can ship items using your UPS account through our system. We do not ship FedEx, DHL, or any other shipper except UPS and USPS. Overseas Freight: Some item
|
|
Advanced lab kit manufactured by Square1 Energy. Used only a couple of times. With all the boxes and original packaging. The Advanced Lab Kit is the ultimate tool for serious researchers and HOD developers. In addition to what is included in the Lab Starter Kit. The Advanced Lab Kit includes an Alicat Measurement Device, specifically calibrated to measure HHO gas. The Alicat integrates with the Commander software to provide real-time visualization and monitoring of gas output relative to user adjustable and/or sequenced parameters. This data is logged and stored in a database along with the readouts from any sensors and parameters read directly from the SIC. This provides the ability to determine the correlations between subtle changes made to the cell operating parameters and the gas output ... moreof the cell. Included with this package is the option to join the HYDRO-MAXX TM Developer Network. If you choose to opt in to this program. Your database and testing results will be integrated with our master database, to which you will have full access. The intention is to provide a wealth of research data to those seriously interested in perfecting HOD technology by incorporating data from as wide a range of sources as possible. Instead of spending days or even weeks testing things that have already been documented elsewhere, the HYDRO-MAXX TM Developer Network will provide serious researchers the means for targeted development of HOD systems for specific applications. Firmly based on a plethora of scientifically acquired data. This package includes: Servo Integrated Controller POM(includes integrated Current Transducer) DB9 → P5 Connector Cable Cat5 Connector Cable Temperature Sensor Power Cable Connector Harness Gas Dryer Filter Assembly Commander L5 Disk(L4 + Data Acquisition. Data Base, Real-Time Graphing) Alicat Measurement Device MSRP 7.000 USD
|
|
Up for sale is a FuelCon TrueData-CMV 70 Fuel Cell MOnitor. Unit is in good used condition. Comes as shown. Sorry. No other accessories, power supply, documentation or software available. Please ask all questions before purchasing. Satisfaction guaranteed. Buyer may return within 10 days or receipt for a refund(less shipping charges) Please use shipping calculator for actual delivery costs. Although the Ebay shipping calculator shows UPS we will ship via FedEx ground. If you need it quicker. Please contact us. All items are packed with care. I've been buying and selling on Ebay for many years. I try to treat my customers like I would like to be treated as a buyer. If you have any problems with any items purchased through our store. Please contact us immediatly and we will make it right. ... moreBefore you email me a question. Please check here for some canned answers to some very common questions: Will you end the auction or sale early? The only way to end the sale early is to"Buy it Now" For the safety of both parties. I do not sell outside of Ebay. Will you ship overseas or to Canada? It may be possible to ship overseas or to Canada depending on the item. Please contact us for details. Do you have any manuals. Accessories, etc for the unit? I do a very good job of listing everything that is included with an item. Everything included is described in the listing and/or shown in the photograph. I'm local. Can I pick up the item? In most cases. No. Only for large bulky items will I consider local pickup. Will you sell a accessory separately or make a copy of a manual or software for me? In most cases no. The accessories provided go with the unit we are selling. If we have any extras they would be listed in our store. We do not copy manuals or software. I will try to answer all questions as fast as possible. Please allow at least 24 hours for answers to most questions. I appologize for all the rules. However. I find it necessary to put these in writing to deal with a small number of"problem" Ebay
|
|
YOU ARE BUYING ONE PV MEASUREMENTS INC PVM 570 PHOTOVOLTAIC REFERENCE CELL. THIS IS USED SURPLUS REMOVED FROM A WORKING SYSTEM THAT WAS REMOVED FROM A SHUTDOWN ABOUND SOLAR FACILITY AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPWSQ) ESTIMATED RETAIL PRICE $4.475.00(6 WEEK LEAD TIME) FOR MORE INFORMATION FROM THE MANUFACTURE PLEASE GO TO: International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International ... moregovernment regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
Produced by SunWize. 5-watt photovoltaic(PV) panel designed for use with Symphonie iPacks. This kit can be used with any Symphonie iPack to provide a renewable source of power for recharging the internal batteries and is ideal for wind assessment sites that receive minimal sunlight during certain seasons. Designed for charging 12-volt battery systems. This photovoltaic(PV) panel is able to deliver battery-charge power levels even in low-light situations. Description Accessory type Photovoltaic panel Instrument compatibility Symphonie NRG logger with any Symphonie iPack Installation Mounting bolts to pre-drilled holes on Symphonie shelter box door with four#10-32 x. 50 inch hex washer head machine screws. Included Tools required 5/16 inch wrench or nut driver Physical Connections 1 m(3 feet) ... morecable to iPack terminal strip Weight 0.91 kg(2 pounds) Dimensions 330 mm x 207 mm x 32 mm(13 inches x 8.13 inches x 1.25 inches) Materials Enclosure black-anodized aluminum frame
|
|
|
Used. Sunlinq 24 volt military grade folding solar panel. Excellent working condition. These retail for 900 and more Ships to U.S. Only 50 States Posted with
|
|
3 Independent. Fully Operational Systems for the price of 1. 4 years old. 25 Year Guarantee on all equipment. Can be viewed. Location: Shelton. CT. Shipping and Installation can be arranged Free shipping if purchased at BUY NOW price. Seller will consider separating. Call with questions: 203.522.0600 TF-800 single axis tracker Qty. 3 SF-45 dual axis trackerQty. 1 Fixed Tilt Rack Qty. 1 275w Jinko solar panelsQty. 108(On single axis trackers) 170w SolarFun solar panelsQty. 36( On fixed and dual axis tracker) Power One Aurora InvertersModel PVI-10.0-OUTD-S2-US-480 Qty. 4 4 to 2 DC combiner BoxesQty. 3 3 to 1 DC combiner Box Qty.1 TF-800 Tracker Control UnitQty. 3 TF-800 Network Control UnitQty. 1 SF-45 Tracker control UnitQty. 1 SF-45 Network Control UnitQty. 1 Anemometer Qty. 1 GPS unit Qty. ... more1 Aurora Universal MonitoringBox(Power One) Qty. 1 Generic Ethernet switchwith POE Qty. 1 100 amp 3 phase 3R NECpanel and enclosure Qty. 1 GE THN 3363R Nema 3Rdisconnect Qty. 1 100 amp 3 phase panel(Mounted in building. Not seen) Qty. 1 Generic Use receptacle.110v weather proof Qty. 1
|
|
|
250 w grid tie inverter. Excellent condition. Used very little as I upgraded to a grid tie system. Masspower Sun-250G model. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ed7174de7-0x106-
|
|
|
Railroad Signal Solar Panel Battery Regulator Solarex Corporation Model Number SRO 12/100 R. Serial Number 5548 Made by EC Electromate Corporation. Jacksonville, Florida Components are mounted in 8" x 6" x 3-1/2" Hoffman style box. No cover Has standard AAR railroad signal 1/4" terminals Bench tested. Adjustable output 12.9 to 15.0 VDC with 15.0 VDC input Capacity/ current rating unknown Sold as is with no returns PayPal payment. Contact me if you have other payment option Shipping insurance will be at the buyer's option Contact me if you have any questions
|
|
Auction Wizard 2000 Listing Template- AW2KLOT#12663 Analog Guy ST1-20A +RS1 light seeking tracker control DC motor linear actuator We gladly ship to most countries! Email us for a Quote NEW The Analog Guy ST1-20A Single axis 20A ight seeking tracker control for DC motors/linear actuators with RS1 remote sensor The ST 1-20A is a light seeking tracker control designed for DC motor systems(typically linear actuators) with up to 48VDC maximum operating voltage(minimum operating voltage=10VDC) In unobstructed sunlight it typically tracks within 0.25 degree of actual sun position. ST1-20A Basic light tracking configuration. Maximum motor current is 20 Amps. Single Axis Version Included Accessories: RS1: Single Axis weatherproof remote sensor with 10 ft(3m) cable. The following normal operating modes ... moreapply: 1) Useable sun-the unit points toward highest illumination. Which is usually the suns disk but may be the brightest part of the sky During variable cloud conditions. 2) Mostly obscured sun(e.g. cumulous clouds with breaks)unit pauses at last valid control point to wait for conditions to change. 3) Heavy overcast or night-unit moves to park position to await light level recovery. The PARK position is determined by S1-2(East or West) and S1-3(V=array vertical. HORIZ=array horizontal) Abnormal conditions-typically. Motor failure or mechanical system jam: Tracker will attempt to move the array. If motor overcurrent condition is sensed. Tracker will terminate drive and flash the PAUSE LED. Indicators on the control PCB: PWR. PRK, PAUSE, E/W DRIVE, UP/DN DRIVE. Notes on initial installation. Power up and adjustments. The remote sensor needs to be attached to the array frame such that the mounting surface of the sensor is parallel with the plane of the array-where on the array is not critical as long as the sensor receives unobstructed sun during the hours when the array is expected to track. One second after power is applied. The tracker is active. If the ambient light level is above the track threshold, it wi
|
|
|
Single Access Ground Mounted. 4 years old. Warranty on all equipment. Can be viewed. Location: Shelton. CT. Shipping and Installation can be arranged Free shipping if purchased at BUY NOW price. Call with questions: 203.522.0600
|
|
Hydrogen Fuel Dispensing Station Mfg. by Air Liquide for General Motors Co. Used from 2008-2012 to fuel 40 hydrogen/ fuel cell vehicles in the NYC area. All major components complete including piping and dispenser unit. A Sullair S-Energy series 3000/ 40 HP compressor functioned with the unit. The compressor is being offered separately from the hydrogen unit. Compressor is a standard 40 hp 150 psi unit. The nitrogen cooling system tank. Designed to accompany the full system, was leased from Praxair. Reinstallation of the system requires a nitrogen tank to be leased as well. Cost at time of installation: $457.000 Info: 802-342-0293 Shipping Information: Hydrogen unit is installed in a modified 8'W x 20'L cargo container. The container has been modified to carry additional weight and ... moreprovide ventilation. Total weight of container is approximately 37.000 lbs Fuel dispenser: skid dimensions 40"w x 130"l x 48"h Freight quote available with C. H. Robinson Worldwide Inspection by Appointment?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f2ecd5272-0xa4-
|
|
|
Here is a Power Jack 1200 watt 14-28 volt grid tie inverter not working red fault light is on. Thanks for looking. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13f69635e1d-0xf6-
|
|
|
I have a tristar TS MPPT-45 solar charge controller if you have questions please email me thanks.
|
|
250 EBOOKS AND PDF'S THIS IS AN INCREASE FROM THE LAST EBOOK COLLECTION OF 100 EBOOKS. THIS HAS 250 EBOOKS ON FREE ENERGY DON'T WAIT TILL THE END OF THE WORLD! THIS IS THE LARGEST FREE ENERGY EBOOK COLLECTION ON EBAY. IT HAS OVER 400 FREE ENERGY DEVICES, MAGNETIC TESLA COIL, ANTI GRAVITY SYSTEM GENERATORS, VEHICLES, MAGNETIC MOTORS AND HYDROGEN POWERED CARS. CONCEPTS. KNOWLEDGE, FORMULA'S AND DIAGRAMS THIS MEGA EBOOK COLLECTION WILL BE SENT TO YOU ON A DVD DISC THE BOOK CONTAINS LINKS TO HOW TO VIDEOS! YOU WILL HAVE OVER PAGES OF PICTURES, DOCUMENTS, DIAGRAMS, INSTRUCTIONS, PATENTS, STEP BY STEP GUIDES TAKE ADVANTAGE OF THE SUPPRESSED TECHNOLOGY INCLUDING: NIKOLAI TESLA COILS BOB NEAL MOTOR LEROY ROGERS MOTOR JAMES HARDYS WATER JET GENERATOR VIKTOR SCHAUBERGER MIKE BRADY'S ... morePERENDEV MAGNET MOTOR THE MURILO LUCIANO GRAVITY CHAIN LAWRENCE TSEUNG'S GRAVITY IMPACT WHEEL DANIEL COOK'S INDUCTION LES BROWNS PYRAMIDS STANLEY MYER HYDROGEN/WATER POWERED CAR(DIRECTIONS. PATENTS, DIAGRAHMS, AND PICTURES) SIMPLE MOTORS, GENERATORS IMAGINE NEVER HAVING A POWER BILL EVER AGAIN. NO WAITING AT THE PUMP, AND HELPING YOUR ENVIRONMENT! WE SHIP WORLDWIDE! INTERNATIONAL BUYERS. ALLOW FOR 2 WEEKS FOR DELIVERY ALL BOOKS WILL BE ON A DVD DISK. TABLET. IPAD, NOOK, KINDLE FRIENDLY! CLICK THE LINK BELOW TO VIEW BOOK LIST AND VIDEOS AGEOFLUCIDITY.INFO 200 EBOOKS IN TOTAL 2447 PAGE Free Energy Book(15 Books in 1) 1) Magnet Power. 2)Moving Pulsed Systems. 3)Motionless Pulsed Systems. 4) Gravitational Pulsed Systems. 5) Energy-Tapping Pulsed Systems. 6) Battery-Charging Pulsed Systems. 7) Aerial Systems. 8) Fuel-less Motors. 9) Passive Systems. 10) Vehicles Systems. 11) Other Devices and Theories. 12) Electronics Tutorial. 13) Doubtful Devices. 14) Renewal Energy Devices. 15)The Present Situation. 50.000 Volt DCPower Supply. Gas electrical hydrogen generator. Magnetism. Alexandersson- Living Water- Viktor Schauberger and the Secrets of Natural Energy(1990) A-Long-Term-Survival-Guide-Scrounging-Metal-and-Survival-Blacksmi
|
|
|
Complete Outback PS2AC& DC less batteries. Grid Tie w/ Battery Backup 2-Outback VFX3648. 1-MX60, Mate, Battery Cables All circuit boards new virtually unused 3600 Watts@ 120/ 230V(stacked) or 7200 Watts@ 120V(parallel) OutBack's grid-interactive technology provides you more than a typical solar inverter. modular design allows for expansion including 3 phase option visit outbackpower/ dot/ com and see interactive grid tie systems/ applications{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13fb95830aa-0xf8-
|
|
|
MAGNUM RD 1824 INVERTER CHARGER- SENT TO MAGNUM FOR CHECKOUT AND UPGRADES- USED ONE YEAR AT CABIN THEN WE UPGRADED SYSTEM. COMES WITH COVER PLATE(REMOVED FOR PICTURE) TERMINAL NUTS. TERMINAL COVERS, AND BATTERY TEMPERATURE SENSOR. WILL SHIP IN ORIGINAL MAGNUM PACKAGING(REMOVED FOR PICTURES) MONEY BACK GUARANTEE- SEE OUR RETURN POLICY.
|
|
|
El Sid Solar Circulating Pump: SID stands for static-impeller driven. Meaning these pumps contain an electronic driver or motor which has no moving parts but simply spins on a magnetic field. The magnetic field grasps the impeller and visibly spins it without any moving parts or seals. As a result, these pumps are extremely long-lived without much power consumption. These pumps are completely brass and stainless steel, so they do not corrode. The El SID pumps have no seals which can leak, and no bearings to get hot or brushes to spark, so they are explosion proof.
|
|
Inventory Number: 02110810930 Manufacturer: Description: SOLAREX AH08160C0 SOLAR PANEL SX10. 22.5Voc, 0.71Isc, 10.7Pnoct, 65Inoct Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, AS SHOWN, OVERALL DIMENSIONS: 17-1/2" X 12" X 2" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to ... morenotify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell addit
|
|
|
6 total units available I am listing these for a friend. they are in very good condition.Very low hours and use. Like new condition. Removed from a wind turbine system. Can also be used with solar panels. Please read manufacturer website for further details. These units are slightly used. Guaranteed to work. Call with any questions. Steve 712-527-0412 This auction is for 1 unit. On Jul-27-13 at 10:12:03 PDT. Seller added the following information: SAVE MONEYON SHIPPING! uShip is the first and largest auction stylemarketplace for shipping and transportationservices. Learn More SHIPPING PRICE ESTIMATOR Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES: uShip Guides and Articles uShip Provider Directory Other Useful Tools& Links Posted with
|
|
|
HHO ELECTROLYTE RECOVERY TANK BUBBLER HYDROGEN CELL You Are Buying A Bubbler/Water Reservoir for HHO Cells. Come with a Plug in the Top for easy Refills. Side Glass View That Allow to see The Water Level and Conditions. Suitable for HHO Dry Cell or Wet Cell Water Reservoir, Bubbler or Water Holding Tank. This unit was constructed and tested but never installed in a vehicle. Shipp NOT available internationally or to Alaska or Hawaii, N.C. residents add 6.75%
|
|
HHO Hydrogen GENERATOR for Cars and TrucksThe HHO Booster is an on-board electrolysis system that generates hydroxy gas at a rate of approx. 1 liter per minute. To go into the air intake, to improve mileage and decrease emissions. An HHO booster is a piece of equipment which increases the mpg performance of a car or motorcycle. It does this by using some current from the vehicle’s battery to break water into a mixture of hydrogen and oxygen gasses called“hydroxy” gas which is then added to the air which is being drawn into the engine. The hydroxy gas improves the quality of the fuel burn inside the engine, increases the engine power, cleans old carbon deposits off the inside of the engine, reduces the unwanted exhaust emissions and improves the mpg figures under all driving conditions. This ... moreunit was constructed and tested but never installed on any vehicle. NOTICE/WAIVER OF LIABILITY Caution: This is not a toy. If you make and use one of these, you do so entirely at your own risk. Neither the designer of the booster, the author of this document or the provider of the internet display are in any way liable should you suffer any loss or damage through your own actions. While it is believed to be entirely safe to make and use a booster of this design, provided that the safety instructions shown below are followed, it is stressed that the responsibility is yours and yours alone. We are not responsible for any damages that may be caused to you, anyone else or your vehicle engine, drive train, personal property, etc. by the purchase and use of any of these products/ parts used for the Hydrogen Generator as well as the information provided that we sell. We are not responsible for improper installation, use, maintenance or operation of these parts. We know, for a fact, when hooked up properly, they create Hydrogen Gas which is HIGHLY EXPLOSIVE. Caution MUST be used when handling this by product of water.ALWAYS use and/or install these in a well-ventilated area and NEVER near a flame. Gas travels and could ignite at an
|
|
|
This Auction is for a Self contained Power Source 10 Watt Solar panel, Includes 10 Watt Solar Panel. Solar Controller trickle charger, Stainless Steel NEMA box with Lock( key not included. Lock is included unmounted so that it does not lock by accident. Does not include battery. Pictures with battery are to show functionality. NEMA is R3 dimensions 10" by 14" by 8" NEMA R3 rated. Perfect for gate entries. Lighting on large properties where electricity is not readily available. Length of operation depends on the Battery hours you install 12 volt battery Please ask all questions prior to bidding. I have 15 in stock. I will ship world wide. Buyer responsible for shipping charges. All sales are final
|
|
|
This solar cell is used and does have a few scratches as pictured. The front only has a very small. Superficial surface scratch on the upper right corner area. Regardless of these, it WORKS GREAT, just like it was new. I tested it with a multimeter before putting it up for sale to verify. It has a cord that is about 8 feet long which is intact but does have a bit of silicone in a few places from when it was mounted. Thanks for looking! Posted with
|
|
|
FUEL CELL INVERTER CANADA MADE IN 2001 IN GOOD SHAPE READY FOR USE MAY NEED REFURBISHING I OPEN IT UP TO TAKE PICTURES AND EVERYTHING LOOKS OK NOTHING BURNED. CAN BE USED OR FOR PARTS IF NEEDED. DON'T KNOW MUCH ABOUT IT SO IF YOU DO BUY IT FOR A DEAL. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1407f523453-0xf1-
|
|
|
unit was removed from a salvage truck. It appears to be in good condition and useable.
|
|
|
Hi! You are bidding on an excellent gently used condition BRUNTON SolarRoll 9 Watt Solar Module! Posted with
|
|
|
Up for auction is this Solar Panel Lot. Five small 6 volt Panels and one small 12 volt Panel Panel# Width Including Frame +/ 1/16" Height Including Frame Tested Output No Load 1, 4 1/2" 5 1/8" 6.85 volts, 2, 7 1/8" 6 1/2" 10.39 volts, 3, 7 1/8" 6 1/2" 11.30 volts, 4, 7 7/8" 7" 10.94 volts, 5, 14 1/2" 4 7/8" 21.2 volts, 6, 4 1/2" 5 5/8" 7.47 volts,
|
|
Nanosolar 160 watts Frameless Utility Solar Panel Description Nanosolar 160 watt Frameless Utility Solar Panel Rated Max. Power: 160W Voltage at Max. Power: 30.0V Current at Max. Power: 5.5A System Voltage: 1500V. 600V(UL) Open Circuit Voltage: 44.3V Short Circuit Current: 7.1A Fuse Rating: 25A Panel Dimensions: 76.25"H x 40.75"L x.25"W Weight is 70 lbs. This is a frameless solar panel. The power generating solar cells in this panel are sandwiched between two sheets of glass. These are"new old stock" which means they were manufactured by the Nanosolar company. Prepared for shipment to the customer but were never installed. They were intended for installation in large Electric Utility Company installations to produce large amounts of power for the grid. These were never ... moremade available to individuals so having them available now is rare. Because they were intended for very large installations they have certain efficiencies not normally found in smaller panels. One benefit of this panel is the ability to use them in strings of up to 1500 volts instead of the typical 600 volt panels. The individual power characteristics of this panel make it adaptable to a very small system as well as a large system. Limited number available so get your order in early before they are gone. Manufacturer Nanosolar Manufacturer Part Number 160 watts Item/Ship Weight 76 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may
|
|
|
Up for auction is a HH2 system. This was removed from a 96 Lexus LX 450 that the previous owner had installed. I removed it after purchasing the vehicle. I never tried to use it before removing so it is being sold for parts only. The reservoir tank that holds the water is broken. See pictures for more info. Shipping to address in continental US only. No waranty no return. Thanks for looking. Posted with
|
|
SOLSTAR I-60 FOLDABLE 60 WATT SOLAR CHARGER- BLACK You are bidding on a nice Solstar solar charger. Accessories are not available. The panel is in great condition. Barely used and fully working. It weights only 4 lbs, and it's very compact- approx. 12x10x2 inches. We will ship with signature confirmation and insurance. Happy bidding! Testing· Merchandise listed as“New” or“New Sealed” is not tested. In order to preserve the condition of the product and of the box. Used merchandise is always thoroughly tested. And any problem will be noted in the description or shown in pictures. Because we sell a wide variety of merchandise, sometimes we don't know how to test every feature. You are therefore welcomed to contact us via Ebay email system to require specific testing. We will make ... moreevery effort to comply with your request before your bid. Please thoroughly verify any product. And contact us within 72 hours in case you are not satisfied with your purchase. Please consider that mistakes on testing may occur and are not intentional, and we will do anything we can to solve problems that may occur to protect your purchase. Return Policy We seek 100% customer satisfaction. For this reason. We will try to do our best to solve any problem that you may have with your purchase. We will make every attempt possible to resolve the issue if we made a mistake(It happens) Please do not assume a mistake is intentional. Let us know if our service could be better! You are welcomed to contact us via the Ebay email system in order to discuss your case prior deciding to return. We use the eBay’s managed returns system. In the unfortunate case you feel that your purchase does not match our description. Please contact us immediately for assistance. We’ll assist you promptly. For a smooth return process, please consider starting a return process, instead of opening the case. We will be happy to accept returns within 14 days of delivery under these following guidelines: We accept only USPS as return carrier. All returned mercha
|
|
|
480 3"6" Solar Cells Tabbed and Clipped! Still in Original packaging sealed with Factory Shipping Box! These cells where clipped by the manufacturer( See Pictures) Because they where caught in the tabbing machine. 0.5 Volt per 3" 6" Cell. 15 Feet Bus Wire + 150 Feet Tabbing Wire!
|
|
|
Works good and in great shape. Has been stored in dark/non-sunlit controlled environment for 14 years and unused. Minimal usage(1-10 hours) prior to storage. Was to be used on a VW Van Camper. For lighting/accessories charging system, but never saw implementation.
|
|
Nanosolar 9.6 KW Carton of 60 160-Watt 30-Volt Off-Grid Solar Panels $0.68/watt Description Nanosolar 160 Watt 9.6 KW Carton of 60 Utility Grade Solar Panels Rated Max. Power: 160W Voltage at Max. Power: 30.0V which is perfect for 24 Volt DC Off-Grid or Battery Charging Applications Current at Max. Power: 5.5A System Voltage: 1500V. 600V(UL) Open Circuit Voltage: 44.3V Short Circuit Current: 7.1A Fuse Rating: 25A, Panel Dimensions: 76.25"H x 40.75"L x 0.25"W, Panel Construction: Tempered Glass with MC3 Connectors at edge for side by side installation Individual Panel Weight: 76 lbs. This item requires freight shipping please contact us for a quote prior to purchasing. This is a frameless solar panel. The power generating solar cells in this panel are sandwiched between two sheets ... moreof glass. These are"new old stock" which means they were manufactured by the Nanosolar company. Prepared for shipment to the customer but were never installed. They were intended for installation in large Electric Utility Company installations to produce large amounts of power for the grid. These were never made available to individuals so having them available now is rare. Because they were intended for very large installations they have certain efficiencies not normally found in smaller panels. One benefit of this panel is the ability to use them in strings of up to 1500 volts instead of the typical 600 volt panels. The individual power characteristics of this panel make it adaptable to a very small system as well as a large system. Limited number available so get your order in early before they are gone. Manufacturer Nanosolar Manufacturer Part Number 160 Watt Item/Ship Weight 4620 LBS Tech Condition This item is new. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing ma
|
|
This is a 64 cell Ballard Power Mark1012 ACS 2.88 kW(2880 watt) open air cathode proton exchange membrane(PEM) fuel cell stack. This uses state of the art self humidifying membrane technology. This completely eliminates the need of an external air humidification system and significantly simplifies system integration. With no moving parts and high efficiency. This fuel cell produces clean DC power with a low thermal and acoustic signature. The same air that feeds the fuel cell also maintains the stack temperature(60C) eliminating a complicated liquid cooling subsystem. The air moves though the passageway in each cell of the fuel cell similar to an automotive radiator. This type of fuel cell is easy to integrate as it only needs a variable speed fan to supply air for the reaction and temperature ... morecontrol as well as a hydrogen supply system( 5 psig) with or without hydrogen recirculation. This a top of the line hydrogen fuel cell with good power density for use in a multitude of applications. Properly serviced and maintained this unit can provide over 10.000 hours of performance. Perfect for of grid battery charging, portable power, or a science/engineering project. This was used for demonstrations and is in very good condition. It was working when pulled out of service. Therefore. It is being sold as is. Does not include the test stand shown in the pictures. No controls or support systems are included. I have over 10 years of fuel cell experience and can assist you in your integration or build your project for you around this stack. I also specialize in hydrogen storage systems. Specifications Rated Power[kW] 2.88 kW Rated Current 65 Amps DC Voltage(open circuit) 54 VDC DC Voltage(full load) 45 VDC Mass(approximate) 32 lbs Stack core height 16" Stack core width 16” Stack core depth 4.5" Will ship world wide. Shipping costs and customs clearance is responsibility of the purchaser. Ships from 77845. Shipping outside of the United States will have higher shipping costs. Shipping will be calculated after the a
|
|
|
Used Solmetric Suneye 110. Has soft case. Disc and manual. No cable. Works fine. Let me know if you have any questions. Thanks, Todd.
|
|
|
This is a crate of 77 Carrizo quadlam solar panels. I originally purchased 4 crates and these are surplus. I installed the same units at one of our telecommunication sites in 1989. And they have been powering the site to this day with no appreciable power loss from the initial installation(24 years) All panels are functional. I configured them in 8 panel units to charge 24 vdc battery systems, though they put out about 37 vdc unloaded. They would be a great source of power for a remote cabin or telecom site requiring solar power. 14 day return policy. Buyer pays return shipping and insurance. Shipping buy quote and will depend on delivery location. MAKE ME AN OFFER I CANNOT REFUSE!
|
|
GLOBAL SOLAR POWERFLEX P3 SOLAR POWER PACK MODEL:16001 48W, Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 This unit is in full working order.If you have any questions please contact us, we give 14 days warranty for this item.12078 About Us, Payment, Shipping, Returns, Contact Us, Liquiditech specialize in ... moreTech liquidation. You can find in our eBay store everything in the tech world from business and industrial, computer equipment and much more, we are an experienced seller in the online market and we have decided to open an eBay store to expand our clientele. Liquiditech's main goal is to give you an unforgettable shopping experience. We do our best to take care of all the clients that purchase from us and we will never let any customer down, this is our main motto. Our team will be here to support you all the way from purchasing to the arrival of your item. We take our eBay business very seriously and any questions that you may have will be answered within 12 hours(most of the time we respond much quicker! We accept all major credit cards via PayPal. We can accept other forms of payment as well, if you wish to pay in other form of payment please contact us first. Items are shipped within 1-3 days of payment receipt. However. Most items ship within 1 business day. All items are packed professionally with bubble wrap and sturdy boxes. Please keep in mind that we are shipping your item from different locations in the world so shipping cost may seem a bit higher and please allow extra time for delivery. If you ever have any qu
|
|
To avoid a potentially negative transaction. Please read all details- THANKS! EBAY ITEM FOR SALE IS-24-L 24 Volt Industrial Solargizer Battery Maintenance System for your Boat or Camper Shipping: Items will ship within 5 business days from the time payment clears. Items are NOT available for local pick-up. We no longer ship overseas. Customer Support: Our office hours are Monday-Friday. 9AM-4PM Mountain Time. We will try to answer any questions you may have but do not have the staff to answer technical or specifications information- to find this, you can do an internet search on this particular model number. Feedback: PLEASE EMAIL BEFORE OPENING A CASE OR LEAVING NEGATIVE FEEDBACK. We guarantee all of our items. Our return policy is buyer preference returns or exchanges within 14 days of receiving ... morean item. Again. Please try and solve issues before leaving ANY negative feedback. Action Recycling is a metal and electronic recycling company. Our electronics department resells mainly used. Working electronics. In most cases, these used items were pulled from a working environment and are in good working condition. Items listed as“for parts or not working” have either been tested not to work or have not been tested at all and are being sold as is, for parts. There will be a time when an item is received that is not fully functional or differs from the description. This is rare but in these cases, we hope friendly communication can be established in order to deal with any issue you may have. We want to make sure you are 100% satisfied with your purchase. In addition, we offer buyer preference returns or exchanges within 14 days of receiving an item. Thank you for trusting and bidding on our auctions. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Amphenol Helios H4 Solar Panel Connector Tool Set. This is the industry standard tool set for solar panel connection tools. This set was used once or twice and is missing a set of standard wire strippers that you can buy at ace hardware or home depot. Posted with
|
|
|
These Fuel Cell Technologies 100 cm2 Single Cell Hardware Fuel Cells are in real good condition and guaranteed to function 100% They came from a local lab that was upgrading equipment. Included in listing are 5 fuel cells without graphite blocks which will be sold for $1000 a piece. We can accept pay pal or your credit card. Please contact me with any questions. A Fuel Cell Hardware Assembly consists of a pair of Poco Graphite Blocks with a precision. Machined flow-pattern and a pair of gold-plated connectors fastened with aluminum end plates. Gas inputs and outputs are through Swagelok fittings. 100SCH 100 Sq. Centimeter Cell Hardware(No MEA Provided) Ref. Electrode not available $4600.00 RETAIL
|
|
|
These Fuel Cell Technologies 50 cm2 Single Cell Hardware Fuel Cells are in real good condition and guaranteed to function 100% They came from a local lab that was upgrading equipment. As seen in group picture. Various components of hardware assembly are or are not provided(terminal wires, heater plug, etc) We can accept pay pal or your credit card. Please contact me with any questions. A Fuel Cell Hardware Assembly consists of a pair of Poco Graphite Blocks with a precision. Machined flow-pattern and a pair of gold-plated connectors fastened with aluminum end plates. Gas inputs and outputs are through Swagelok fittings. 50SCH, 50 Square Centimeter Cell Hardware(No MEA Provided) $3210.00 RETAIL,
|
|
Nanosolar Frameless Utility Solar Panel 30 Volt 5.5 Amp(160 WATTS) Nanosolar 160 watt Frameless Utility Solar Panel 30 Volt 5.5 Amp This item requires freight shipping. Please contact us prior to purchase for a freight shipping quote. Rated Max. Power: 160W Voltage at Max. Power: 30.0V Current at Max. Power: 5.5A System Voltage: 1500V. 600V(UL) Open Circuit Voltage: 44.3V Short Circuit Current: 7.1A Fuse Rating: 25A Panel Dimensions: 76.25"H x 40.75"L x.25"W Individual Panel Weight: 76 lbs. This item requires freight shipping please contact us for a quote prior to purchasing. This is a frameless solar panel. The power generating solar cells in this panel are sandwiched between two sheets of glass. These are"new old stock" which means they were manufactured by the Nanosolar ... morecompany. Prepared for shipment to the customer, but were never installed. They were intended for installation in large Electric Utility Company installations to produce large amounts of power for the grid. These were never made available to individuals. So having them available now is rare. Because they were intended for very large installations they have certain efficiencies not normally found in smaller panels. One benefit of this panel is the ability to use them in strings of up to 1500 volts instead of the typical 600 volt panels. The individual power characteristics of this panel make it adaptable to a very small system as well as a large system. Limited number available so get your order in early before they are gone. $35.00 SHIPPING IS CRATING FEE ONLY. $35.00 SHIPPING IS CRATING FEE ONLY. This item requires palatalized freight shipping. If you would like us to arrange transport. Please do not pay until we have entered the quoted freight shipping rate in your eBay invoice. We are happy to assist in booking transportation for you and can add that service to your order. Please contact us if you would like a freight shipping quote. Local pickup is encouraged, which has no additional fee. PID 46880
|
|
|
Shell Solar ST10 Solar Module/ Solar Panel. 10 Watt. Used in good working condition. Discontinued. Specs: Maximum system open circuit voltage: 25V, Short circuit current: 0.77A, Rated current: 0.64A, Open circuit voltage: 22.9V, Rated voltage: 15.6V, Series fuse: 2A, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-142f99fddeb-0x103-
|
|
|
This is the same chip that is sold by HydroClubUsa here: This is flashed for a 1999 Plymouth Voyager mini van but can be easily re-flashed. I had this re-flashed once already(changed vehicles) and I think it cost me $15.00 for the re-flash. FAST AND FREE SHIPPING!
|
|
Meet the new cell design from Advance Tech Engineering! Incorporated in this new design is years of testing in collaboration with plating in the Semiconductor Industry. Our innovative designs alone show that we are leaders in the hydroxy industry. Buying our products is like investing in the future. With every purchase from us. We are able to move the future of energy closer. Our ultimate goal is to bring free/cheap energy to the world. This Cell uses and requires 220v and produces up to 15 LPM. ATE used this cell for testing and running vehicles on solely hydroxy. You can see this cell in action here: and here: To see more of our products please see our website at Our home page Advance Tech Engineering prides it's self on being the far most knowledgeable on all things hydroxy/hho. So ... moreif you have any questions at all, feel free to ask!
|
|
|
Up for auction is a water electrolysis unit that was purchased as part of an estate auction. It is being sold as-is and all sales are final. From what we know about this unit. It was used strictly to convert water into hydrogen/HHO mixture. By the looks of it, it was used very little. It appears to be a very high quality unit and is of stainless steel construction. We do not have any data on it, but it appears to have been custom made. We filled the unit with water and applied 12 volts to it for testing. It appeared to be producing gas at that point. But no futher testing was done. Unit measures approx 12 inches high by 4.5 inches wide. Buyer pays actual S&H. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-142f9a10403-0x101-
|
|
This tank was briefly used in an experimental hydrogen fuel cell vehicle. The vehicle has been stored in a University basement since about late 2007-2008. The tank is in very good condition. This is a Type 4 tank rated for 250 Bar = 3600 psi. It measures 18” in diameter and 51” long including the valve on the end. This includes the mounting brackets shown in the pictures as well as a high pressure transducer. The tank is due for inspection and re-certification in 2015. If you require a larger or higher pressure Tank please contact me. I also have a 350 Bar 5000 psi Dynetek tank measuring 23.7” in diameter and about 42” long including the valve manifold. This is a Type 3 tank and can store approximately 4.26 kg of H2. This too was used briefly in a fuel cell prototype vehicle. The vehicle was ... morealso stored in a University basement since around 2007-2008. The tank is in very good condition with few cycles and is certified until 2019. It includes mounting brackets and a 350 Bar refueling nozzle. This auction is just for the one Lincoln Composites Hydrogen tank. Like I said. Knowing the history of the company that built the vehicles and where they have been in the last 6 or so years it has seen very few cycles. Let me know if you have any other questions. I have been designing. Building, and integrating hydrogen storage systems and hydrogen fuel cell systems in vehicles for over a decade. If you need assistance with integration or design please contact me. I can provide turnkey solutions for almost any platform. H2 tanks are notoriously difficult to purchase in small quantities. With my industry contacts, I can help source hydrogen tanks of various sizes for your project. Winner must make payment within 3 days. Please note there is no paypal or CC on this item due to it`s value. This will ship by freight and added to the final price unless you make your own shipping arrangements. When the auction is complete I will email the winning bidder an invoice with shipping costs. For cost estimations assume 275 lbs. Thanks for
|
|
|
Hi. This is Don. This is a neat little item. Seems to be functional. Gears turn smooth. I don't know what this is from, or application, I put solar in the title because a fella bought a similiar gearbox from me that I think he used for some solar panel setup. This has several nicks. Dings, and scratches, and damage to one of the grease seals. It is filled with wheel bearing grease. The 5/8" shafts have scars, set screws ect, but not fit or function damage. Specs are; Input RPM- 1750, Input HP 1.5, Flange patterns; 1 7/8" X 1 3/8" Questions are welcome. You can email or call 740 745 3334 anytime. I will combine shipping for multiple items. Thank you very much for looking at my listing.
|
|
Price Reduced from $85k- Need to move Stuart Energy/ Hydrogenics Hydrogen Fuel System 15 Nm3/h on-site hydrogen generator For a continuous production of hydrogen and oxygen based on the principle of water electrolysis. As a default. The HySTAT consists of a Process Part. A Power Rack and a Control Panel along with a complete set of interconnecting cables. The core component of the electrolysis skid is the HySTATTM pressurized electrolysis cell stack. The cell stack consists of circular electrolysis cells. Each containing two electrodes and an alkaline inorganic ion-exchange membrane. Process Skid The H 2 and O 2 are generated when current is supplied to the cell stack. The gases are then directed to the gas separator. Which is a dual stainless steel pressure vessel, and then rinsed in the ... moresmall pressure vessel located above the gas separator. An ISO 20’ high cube container designed and modified to house the 15 Nm3/h hydrogen plant. SPECIFICATIONS- One full generation unit. Unit contains all components and hardware. Approximate weight: 12.000 lbs. Does not include external storage tanks. Model: IGEN 1000/15/10 H2 OUTPUT-Flow range: 6 to 15 Nm3/h-Purity(before HPS: Hydrogen Purification System) 99.9% H 2 O saturated) O 2-Cell Stack(s) quantity: 1 POWER REQUIREMENTS-Estimated power consumption@ full flow(after HPS) with utilities: 5.3 kWh/Nm3-Voltage: 3 X 400 VAC ± 10% 3 X 480 VAC ± 10% Standard in US option) Frequency: 50 Hz ± 3% 60 Hz ± 3% Standard in US and CA option) Ultima X-series gas monitors- Ultracool Superplus chiller unit-Feed Water Treatment System-HPS(Hydrogen Purification System) Make Offer- Price Negotiable" Payment: All payments must be made within 14 days. Arrangements can be made for payment methods. Shipping: Arrangements can be made for loading and shipping at the buyers expense. Contact Information: Any questions. Please contact by email kantnecc@muohio.edu
|
|
|
These M190's(208) were part of a mis-shipment from a vendor and they were installed. They were supposed to be 240volt and nobody caught it. They were installed and did not work because it was a 240volt installation. It is safe to assume that they work perfectly and are ready to be installed. Judging buy the serial number 1212.they were manufactured then. Please check out my return policies and shipping before bidding. Thanks and good luck! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1431679b98e-0xe0-
|
|
|
YOU ARE BIDDING ON ONE USED VON WEISE LINEAR ACTUATOR MODEL V05679AK76U RATIO 115:1. THE MOTOR BEARS THE FOLLOWING MARKINGS: VON WEISE LINEAR ACTUATOR. 115VAC 60Hz MODEL V05679AK76U INT. DUTY RATIO 115:1. THERMALLY PROTECTED VWG-1 CLASS B OMSI; 40C. SERIAL M0800M. MM54000M74B LR 42492. E32557. SMALL MOTOR STAMP. P.N K14003-0004. MODEL 71902031. TYPE 90B1 V 115. E46205 E53469. ASSEMBLED IN MEXICO M4900. THIS ITEM WAS ACQUIRED AT LOCAL FACTORY AUCTION WHERE NUMEROUS PARTS AND ASSEMBLIES WERE OFFERED DUE TO RETOOLING OF A PORTION OF THE FACTORY. ITEM WAS SOLD AS OPERATIONAL. THIS DEVICE WOULD BE EXCELLENT TO UTILIZE TO MOVE AN ARRAY OF SOLAR PANELS TO MAXIMISE ANGLE TO THE SUN. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1432b4375ee-0x106-
|
|
|
Tested with DI water and guaranteed working. The dessicant pouch may benefit from a regeneration process: put in an oven at 200C for about an hour. Packed in double-wall box with closed cell foam padding. It will arrive in good condition. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1432eb9a458-0xe7-
|
|
|
This is an used Greenvolt concentrating PV module in working condition. This module is taking multijunction solar cells. Fresnel lenses and secondary optical components which has higher efficiency to transfer sunlight into electricity. Pickup only. Welcome to inspect it before buying. Sale as it is.
|
|
|
Normal 0 MicrosoftInternetExplorer4 30 amp PWM from HYDROGENWATERPOWER.COM 30 AMP. 12V Multi Function HHO Pulse Width Modulator hardly used, purchased form hydrogenwaterfuel.com cost over 300.00. Works fine, had little use. As far as I know it’s 12 volts not sure of the max amp capability multi frequency. I don’t have the exact specs on it nor can I find one identical to get the specs, as the website for the company is not available last time I checked recently.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14353e9f0dd-0xfa-
|
|
|
Hydrogen kit for small engines up to 3.5 liters. Most of the kit is completely unused. Just a few parts were used for testing then cleaned. The kit includes the following: 1. HHO Dry Cell Generator 8 plate of 316L stainless steel 2. Reservoir Bubbler 3. Pulse-Width Modulator-PWM-30A. 4. EFIE. 5. LCD Display HHO Am meter- 30A. 6. Relay. 7. Toggle Switch 8. Relay Socket. 9. Fuse Holder with fuse. 10. Solenoid 11. Fuel Vaporizer. 12. Instructions for installation
|
|
|
Up for auction is a gaseous fuel mixture unit that was removed from an experimental internal combustion engine. This is a liquidation item that was part of an estate sale. And is being sold as-is. Liquidation items are NON-RETURNABLE for any reason, and all sales are final. This unit was apparently designed to mix hydrogen/oxygen with air to be burned inside a gasoline engine. But will probably work with propane, natural gas, and other gaseous fuels as well. It appears to bolt directly onto the engine, just as a regular carburetor would. The controls seem to move freely. Because we cannot test this item, it is being sold AS-IS, and for PARTS ONLY. Buyer pays S&H. Please email or call 508-923-9503 with any questions.
|
|
|
PWM HHO Hydrogen Generator. Dry Cell Used but working really good.
|
|
|
This auction is for a used AquaPulser D1400 Gated Pulse Generator. I used this unit for testing with HHO generators several years ago and have not used it since. I do not have any manuals or other info on this unit. The unit does power on and work. Feel free to ask if you have any questions.
|
|
|
This ballard power hydrogen fuel cell was part of a power backup system that was decommissioned in working order. Total time on the cell is just over 600 hours. Has been stored in a temperature controlled warehouse since removal. Rated at 4kw continuous power. But can be used for up to 12kw peak power. Depending on when/where this sells, shipment may call for'no freeze' handling. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144103f5bc1-0xe3-
|
|
|
The Seway Father NineBot 2014 Is A Personal Robot Join ouer Comunity for Global Economy NEXT WEEK YOU HAVE IT Adam Huber Huber Heights International
|
|
This large PEM fuel cell is a module that was made for use in a rack that housed multiple units so that hydrogen and cooling was shared. This module contains four separate fuel cells. I can find very little technical information on the individual modules but from searching on the internet it would appear that they are either 41W or 60W. You could probably call the company(Avista) to obtain the specifications but suffice to say they are rather large as this type of fuel cells go. These are hydrogen-air cells which means that they obtain the required oxygen from the air. Hydrogen-air cells can be run on oxygen for added efficiency but it is much easier to simply use air. The air that provides oxygen is also used to cool the cell and take away excess water vapour, the visible metal plate is covering ... morethe duct that channels air through the body and over the membrane, there are vents visible at either end of the module. To use the fuel cell you will need hydrogen gas. An easy gas to obtain by electrolysis or from any bottle supplier. You will also need some sort of air flow through the module, a blower fan would do nicely. As it is, each end of the module has two cells wired in series which will produce about 1.2-1.4 volts, all in series it will be about 2.6V which can be used directly or stepped up using a boost module to get higher voltages. Easy to disassemble and clean. If you want it as parts then the elements could even be re-purposed, there is a fair amount of platinum and other precious metals in there too. The case is very robust, there are many small springs that provide strong and even compression over the membranes. Dimensions are 43mm x 171mm x 267mm and weight is a little under 1.5kg. Shipping is from New Zealand. If you have a preferred shipping method then I will be happy to use that. NZpost charges about $45 for a package of this weight(1.5kg) to the US, UK, and Canada, and about $20 to Australia, these aren't guaranteed but I will endeavour to keep costs below that. NZ shipping is FREE! If you are
|
|
|
H-TEC Fuel Cell Solar Hydrogen System PEMPower 1 Junior Classroom Instruction Kit This kit appears in good cosmetic condition. The photos show the actual items. I did not test this other than checking the meters and the stopwatch. One meter appears to be working. The other one and the stopwatch did not show any readings but may just need batteries. I do not know how to test it beyond that so I must sell it as is. I will accept a return if you are not satisfied but I cannot refund the shipping charges. Includes what is shown. US shipping only on this item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Ovonic Solid Hydrogen Storage canisters utilize proprietary metal hydride technology to safely store hydrogen in a compact manner at a low pressure. Up to 250psig. The metal alloy powder contained in the canister is formulated to absorb and release hydrogen similar to a sponge absorbing water. Canisters are designed to operate at ambient temperatures with no requirement for added heat and can store several times more hydrogen than similarly sized high-pressure compressed hydrogen cylinders. These canisters can be charged and discharged infinitely with no related memory problems that batteries incur unless contamination is introduced. Canisters may be re-generated fully if contaminated by moisture using a simple vacuum pump. These metal hydride storage cylinders were purchased for a pilot fuel ... morecell project that was not funded for completion. over $950.00 usd orginal price. Current pricing is higher) These cylinders have been charged and discharged(fully and partially) as many as 10 times in a laboratory environment using dry. Fuel cell grade hydrogen. You are bidding on one(1) 900 liter(80 g) Aluminum pressure cylinder filled with Ovonic proprietary Metal Hydride storage medium with manual control valve. Pressure/temperature relief valve and 1/8" female NPT connection. Specification sheets and refill instructions will accompany each cylinder. These are fully functioning items. No Returns. Please ask questions before purchasing. See pictures for P-T curve and basic specifications. Shipped empty(no hydrogen) and sealed with 1/8" npt plug. Details The Solid Hydrogen Storage Canister(International) 900 SL uses Ovonics Standard"Air Shippable" DOT-SP13280-400 Alloy and provides a hydrogen storage capacity of 900 standard liters. The Ovonic Solid Hydrogen Storage canister includes a manual shut off valve and safety valves for over pressure and over temperature conditions. Technical Specifications Hydrogen Storage Capacity(nominal) 85g/ 900 Std. L(condition dependent) Diameter: 3.5in. 8.9cm Length: 16.
|
|
This is for one Avista(Now ReliOn) Hydrogen Fuel Cell Blade Module with approximately 250 Watt Output and weighs 11 lbs. Great for science projects or to learn about fuel cell technology. This is used and was pulled from a working system. I have no way of testing the individual module. Sold As Is. Hydrogen enters and exits at the back two connections and air moves through the large opening. A series of fans should be sufficient to move the air. I have about 10 of these. I also have a complete 2000 watt system availablethat uses these hot swappable modules. See pictures for details. Let me know if you have any questions. Winner must make payment within 3 days. Thanks for looking. Check out my other auctions. I have a lot of fuel cell and hydrogen storage parts and systems. Let me know if you ... moreare looking for something.
|
|
|
For bid is used HHO generator. 2x 6” 21 plate dry cell generator was used in my Chevy Tahoe. Recently I am building 5 times larger wet cell and therefore my recent kit has to go. I purchased it 1 year ago on Ebay. I spent over $900 for the kit. You can have it for fraction of the price. Kit is in good working condition ready to install. What you see in picture that is what you get. For details check: http:www.ebay.com/itm/Best-HHO-6-21-Plate-Dr y-Cell-Generator-Kit-331064839649?pt=LH_DefaultDomain_0&hash=item4d15008de1&vxp=mtr.
|
|
This auction for a used Jadoo 100 Watt Hydrogen Fuel Cell. This shows signs of use but looks to functioning. I think the banged up appearance is from careless storage. When new this was rated for 100 watts and I was able to pull 50 watts from it. That's as far as my electric load would go. I can only say with confidence that this will produce 50 watt. See picture for voltage operating at 45 watts. I can not guarantee 100 watt output so please bid accordingly. This does not come with hydrogen storage. The winner will have to find a way to supply hydrogen to this system. Description from Jadoo: Jadoo’s N-gen is a fuel cell power unit that is both easy to use and reliable. The N-Stor refillable fuel canisters( not included) recharge the same the first time as the one hundredth. No memory ... moreas with traditional battery solutions. N-gen is capable of producing 100 watts of continuous power, perfect for recharging radios and cell phones in the field or powering surveillance equipment. The fuel cell system were originally developed to be battery replacements for in the field news cameras. See pictures for details. I have years of fuel cell experience so let me know if you have any questions or need assistance developing a system or solution. This is Sold As Is. Thanks for looking. Check out my other auctions for more fuel cells. If you are looking for something specific please let me know. I have a wide range of fuel cell parts. Stacks, and system available. Winner must make payment with in 3 days of the end of the auction.
|
|
Up for sale is a Plug Power“GenCore” 48Vdc. 5000 watt Hydrogen(PEM) proton exchange membrane fuel cell stack. There is less than 6 hours of actual run time on this stack before it was decommissioned from working Gencore fuel cell unit. Stack was removed and stored in heated warehouse since removal. It has been sealed with the protector caps the entire time it has been stored. It has never been exposed to freezing temperatures since then. It will need to be rehydrated before its next use. I have coolant that I can send along. Or can hydrate prior to shipping if you plan to use asap. Coolant is propylene glycol and distilled water) This would be a perfect replacement for a Plug Power Gencore system that needs a stack. Or would make a great project for hobbyist. Could also be a replacement for ... morean Ida-Tek or Ballard fuel cell system. Unfortunately I can’t keep this. Company is looking to recoup some of the costs. This is no longer made by Plug Power. However the replacement cost of the stack alone was $5800. I have all installation manuals/spec sheets. As well as extra Gencore parts/coolant that I can include in sale if requested. For a copy of manuals to look at. Email me at miscfuelman on gmail. Below are some specs that I know about this if you are looking to“play” with it. Specs: 46 to 56 volt operating range 5000 watt max continuous 0-109amp operating current range Actual hydrogen pressure into stack-1.2 to 1.8psig Maximum water emmisions-2 liters per hour@ full power load If looking for possible project with this(my knowledge) Top pipe on stack is for the coolant which houses a thermostat(just like a car. But opens at 120 degrees) There are two coolant pipes on bottom of stack. top one runs to a radiator just like a car to cool coolant when needed. One is the return to the stack, and the other goes to a coolant pump to keep stack from freezing when system isn’t running) Two AN connectors on back side are for the Hydrogen inlet. The second one is for the EGR blower(think car) which recirculates mixtur
|
|
|
This is a 40 amp PWM made by Hydrogen Boost Now. I purchased it for a project and never finished it. The unit works fine. Directions come with it. I never had it in a car just hooked up on my test bench when testing my cell. I know this unit works. So if you hook it up backwards and fry it, It's on you, no returns. Happy bidding. Ships to lower 48 only
|
|
|
It was used for 2 months. There is no original end plates but I added two pieces of plexi glass. Also. Barbs not included. No International Shipping!
|
|
|
I was cleaning my garage and found the HHO kit I use to use on one of my cars I nolonger have. This Kit was working and did raise my milage but depending on the vehicle you install it on you may need a controller. 1. The generator is a 9 plate 6" 1/8 gasket Best HHO dry cell generator. 2. Tank with 5 Ports 3. Amperage Gauge with 37.5 trip amp DC Circuit Breaker and 10ga wire 4. Relay and socket 5. all the used hose 6. 2 New O2 sensor extensions(I never got around to installing these) 7. 3/8 x 1/4 npt nylon hose barb for the intake 8. The instruction sheet I got with the generator. All Sold AS-IS Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14596985e2d-0x103-
|
|
|
Used condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145a07e6fb5-0x114-
|
|
|
Set was used 2 months. There are no barbs and no end plates- but I added 2 plexi glass. I ship to 48 US States. no shipping to Alaska, Hawaii, Puerto Rico and the US Virgin Islands) no International shipping. Payment must be received within 48 hours of the close of the auction. Otherwise. I reserve the right to cancel the order and relist the item. Returns: I accept returns within 7 days. When returned. Item must be in the same condition as when shipped. Buyer pays shipping on returns. I will usually ship within 2 business day of receiving cleared payment. DELIVERY CONFIRMATION INCLUDED. IMMEDIATE PAYMENT REQUIRED.
|
|
Used working great condition pull from working unit. I used in on my Madza 5 for 6 months and it did save me some money. What you see is what you get. I might send you the instruction if I can find it(consider I can't find it right now) I bought it from GreenSource 2 years ago for approx. $200 include the Pulse Width Generator. Basically connect the Red to 12V and black to negative. The 2 spades connect to the top of the fuel cell. I consider you do have some experience in connecting/ installing the fuel cell as i wasn't able to provide any technical support. Consider this kit as spare parts or junk. This kit includes: 1. H ydrogen generator reaction vessel with stainless outer(up to 4L engine) 2. Stainless Steel electrode pack 4. braided reinforced tubing(you might need longer) 5. ... moreFlashback arrestor 6. Fusible link(fuse and holder) 7. 16 gauge) red primary hook up wire(for 12 volts) 8. 16 gauge) black secondary hook up wire 9. 1 toggle switch 10. spade. Quick Disconnect” connectors for connecting to the toggle switch 11. Comes with PWM(Pulse Width Modulator) 12. Throw in 2 black rubber seals and one input connector for the fluid Comes with PWM(the circuit from the photos) If you require substantial HHO output. You need a PWM. PWMs control the current inside the generator, thus the HHO flow, and the temperature of the operation. Using PWM if: 1. You use KOH or NaOH as an electrolyte 2. You do not want to risk overheating the hydrogen generator 3. You live in a warm climate and/or require the generator to be working at higher flow rates. Ie. near their capacity. No warranties/ non return and ship in USA only.
|
|
|
This Hydrogen Generator works great. Comes with Wiring Diagrams and Instructions.
|
|
Normal 0 false false false MicrosoftInternetExplorer4 This is a used Plug Power GenCore 5T PEM fuel cell system. You need to supply pure hydrogen. And it will deliver up to 5,000 W at 48VDC. I have the operations manual and specifications. But I do not have the ability to test and certify the condition. However. These were fully functional upon decommissioning a several years ago. I cannot verify the hours of runtime on the stacks. Stack was removed and stored in heated warehouse since being decommission several years ago. Tubing is sealed with the protector caps. This is a good educational or learning tool. Or could be a great hobby project. Please don’t expect this unit to be refurbished and run for many years. It is an older model and not fully supported. I can put you in contact with some ... morecommunity colleges and ogther experts with knowledge of this unit. the replacement stack price used to be $5.800) and the complete system new was over $30,000. The unit is 48VDC and 5.0kW maximum power. Fuel input is 75 slm of pure H2 supply at max power. The total weight is 500 lb. There is no inverter. Only 48VDC output, but you can add an inverter or batteries, and/or solar DC for a complete system. You could pick up locally(SE Michigan. North suburb of Detroit) and I have a fork truck here on site. Alternatively, I will palletize, and ship via freight truck at your cost. I have three units available for sale. If you desire spare parts or redundancy. Normal 0 false false false MicrosoftInternetExplorer4
|
|
|
I am selling all 3 devices in this listing: 1 The Protium Fuel saver Mass air flow sensor tuner has three knobs( I had this on a Dodge Dakota 5.9 that I sold) 2 Hydrogen single Oxy sensor adjuster( comes with instructions) one knob one switch( I had this on a Dodge Dakota 5.9 that I sold) 3 If My memory serves me. I believe its a Eagle Research EFie kit that was assembled but not tested.eagle-research.com/cms/store/fuel-savers/efie-device-kit The first two did operate when I removed them The last one has not been tested All Sold AS-IS
|
|
Used 1 Plug Power Hydrogen Fuel Cell Graphite Bipolar End Plate from a GenCore Fuel Cell Stack One side has a flow field and the other is blank. The active area is approximately 245 cm2. The plate has internal cooling channels. The cooling ports can be seen on the edge of the center manifold. Put a PEM membrane(MEA) between two of these and you have your own single cell fuel cell or electrolyzer. These have molded in rubber seals on both sides of the plates so you won't need an O-ring or gasket. Overall the plates are in good usable condition. They came out of operating fuel cells that were only in operation for six months for a test project then they were decommissioned. If you have any questions contact me. Check my other listings for more fuel cell parts. Stacks, and systems. Sold As-Is ... morewith NO Warranty Local pick up or can be shipped. Buyer pays actual shipping. Cash in Person or PayPal Payment must be made within 3 days or item will be relisted. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1477f0a4bb3-0x10b-
|
|
|
This is a small hydrogen generation tank designed to fit underneath the hood of most automobiles. Everything is assembled. But installation will require some automotive knowledge. This tank has never been used. But I used one identical to it on my'93 Toyota pickup 4-cylinder gas engine. The hydrogen comes out of the top of the tank, and I hooked it into a vacuum line going into the intake. Its a fragile process to get everything set up right, but once it is, fuel efficiency and horsepower both increase. Some claim these devices can double efficiency, but I saw about a 5mpg increase, and about a 20HP increase. I urge you not to buy these components unless you are familiar with hydrogen devices.
|
|
Up For Sale: Stan Meyer Replicators kit: Phase Lock Loop driver circuit: This kit includes a replication of Stan Meyer's Phase lock loop driver circuit which includes the following circuits on a single circuit board: Cell Driver Circuit-Gated Pulse Frequency Generator circuit-Phase Lock Loop circuit-Resonant scanning circuit-Pulse indicator circuit-Variable Pulse Frequency Generator circuit The circuit board connects to the VIC and switches it on and off with a gated pulse train. The frequency is manually adjustable. But in auto it will sweep across a range of frequencies as it looks for resonance. When it finds the resonant frequency it locks onto it. As you can see from the pictures the circuit board is in complete working order. The circuit produces a gated pulse train in which the ... morepulse frequency. Gate frequency, and gate duty cycle is adjustable using small trim pots on the circuit board. The circuit also comes with it's own ac adapter-power supply. The Circuit board was purchased from Globalkast.com VIC coils and Bobbins Included is one set of ferrite U cores. These cores are very fragile and have been repaired in several places where they cracked. see pictures) There are also 3 bobbin sets included in the kit(See pictures) Both the VIC and Circuit board are housed in a plastic project enclosure for protection. see pictures) What you'll need As you can see from the pictures the coils have been partially taken apart and modified. If you want to make an exact replication of Meyer's circuit you'll need some 29 or 30 awg wire to re wrap the coils You'll also need a HV ultrafast diode for the coil as well as a water cell. Although this circuit performs exactly as it should replicating Meyer is no easy task. This kit comes with no guarantees that you'll have a successful replication. If you are operating this you should have some electronics knowledge so you don't damage the circuit. Yourself or someone else, or property. By purchasing this kit you agree to assume all responsibilit
|
|
Complete GenCore 5T Hydrogen Fuel Cell System- 5000 Watts This is a used Plug Power GenCore 5T PEM fuel cell system. You need to supply pure hydrogen. And it will deliver up to 5,000 W at 48VDC. I have the operations manual and specifications. These were fully functional upon decommissioning a several years ago but I cannot verify the hours of runtime on the stacks. The stack was removed and stored in heated warehouse since being decommission several years ago. Tubing is sealed with the protector caps. This is a good educational or learning tool. Or could be a great hobby project or used as backup power. The unit was made in 2004 and the complete system new was over $30,000. the replacement stack price alone is $5,800) The unit is 48VDC and 5.0kW maximum power. Fuel input is 75 slm of pure ... moreH2 supply at max power. The total weight is 500 lb. Due to the nature of the item. I am selling as-is and the item is located in Toronto, Ontario. If you want the item shipped, I can put the item on a pallet and ship internationally as well- but the cost will vary depending on location. Please contact me for proper shipping quote, but the item is quite heavy and large, so please keep that in mind
|
|
Famed producer of HHO units Denny Klein passed away last year and left very little behind but a legacy of stimulating the field of alternative energy. I knew him personally for years and we were completing a private label deal with him to produce our units for Kleangas when he passed away suddenly. He lived a larger than life kind of existence and never expected to die so he left no last will and his heirs suffered for it. Of the few things his son was left with is this HTA unit that Denny himself used for experiments and he would bubble the gas through his drinking water and would breathe it as well. I saw him many times in his back-shop with this unit"doing his thing" The unit for sale here is his personal unit and I promised his son that I would put it out there for sale so that ... morehe would have some funds to offset the costs of his father's passing. Included in the sale is the operators manual and the buyer will receive a personalized thank you. Note from Denny's son Greg Klein. This is primarily to help the family of this legendary man. Shipping is at buyers expense and via buyers specified method to be arranged post auction. This is a two man lift unit and extra charge will be added if crating is required. Basic handling charge of $80 is in any event. Item is for sale off-line also but if auction makes it to the final 24 Hrs it will be sold on EBay.
|
|
This is a working low voltage 2 kw alkaline electrolyser system that has been field tested since 2005. Hydrogen production capacity is up to 15 standard cubic feet/hour and has made well over 30 Mwh of zero emission energy from various RE sources It creates 99.9% pure hydrogen at 2000 psi. Meets or exceeds ISO standards. It is directly coupled to the RE source and can be coupled to wind or PV system simultaneously. Will automatically switch from RE power to grid power. System includes 2-1.4 Kw of PV(12 VDC nominal) Package includes: All electrical and computer controls. Data logging program, Historical performance data Fail safe safety system, 80 Kwh of H2 storage, Hydrogen purification system. Some spare parts and 15 gallons of Potassium Hydroxide solution Set up and training are also included. ... moreThis system comes with a money back guarantee. This is a large and heavy system with multiple components so delivery costs will be determined by final destination
|
|
Parker Balston Hydrogen Generator 75-31 Mdl. 75-31NA Used Thank you for choosing us! If you have any questions. Please ask any questions through EBAY MESSAGES. Exactly what is pictured is included. If you have doubts about what is included. Please ask before purchasing and we will be happy to clarify. We strive for 100 percent satisfaction with every sale. If there is a problem of ANY kind with an item you purchase from us. Please contact us through Ebay and give us the chance to make it right. We use a numerical rating system. Please refer to the item's condition number and the explanation of each number below The Condition of the item in this listing is: 2 Item descriptions are defined as follows: 1. Means the item is new/unused. 2. Means the Item is fully working with a 14 day warranty. ... more3. Means the item has some working issue or damage. If not explained above. Please ask or refer to pictures. This is being sold as-is. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Regardless of the origin of the equipment. Photographs provided in the listing, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified, recommended for, or offered for sale for any specific use and seller is not liable for any injuries or damages associated with the equipment. It is the buyer’s responsibility to have this item professionally tested and certified by an authorized technician prior to use. We accept Paypal. Please contact us ONLY through EBAY MESSAGES with questions. We do our best to ensure the safety of your item. We have bubble wrap. Packing peanuts, and high quality corrugated cardboard boxes. We w
|
|
Digital EFIE For Wide Band Oxygen Sensors Wide Band Quad EFIE For 6 and 8 cylinder engines that have wide band oxygen sensors. Vehicles that have wide band oxygen sensors. Only use them upstream of the catalytic converter. The downstream sensors will still be narrow band. This digital EFIE has 2 wide band and 2 narrow band EFIEs. It has one potentiometer that controls the 2 wide band and another pot for controlling the 2 narrow band. It will work with all types of wide band and AFR(Air/Fuel Ratio) sensors. It is the EFIE to choose for four and five wire oxygen sensors. Also note there is a variation of the 5-wire sensor that uses 6 wires. This device will work with these also. SLIGHTLY USED. I bought this off the"Hydrogen Generators USA" website. I used it a few weeks. It worked ... moregreat, and then I upgraded so I no longer need it. It was $99 brand new, so I'm sure you'll get it much cheaper buying it used from me. Happy Bidding.
|
|
|
These are electrodes taken out of operating hydrogen/oxygen generators. They are composed of a nickel mesh. They are better than stainless for use in electrolizers or HHO cells because they will not decay with use even when strong electrolytes like KOH. I will sell these 2 ways as full 24 plate sets 12 positive 12 negative or as individual plates. This auction is for a full set of 24 plates tied together in 2 sets of 12. The pictures are of a set that I cut some individual plates off for testing you will receive a full set with none removed. Please look at my other auction for sets of 2 single plates. I have a couple dozen full sets so a bulk deal is possible. Thanks Posted with
|
|
HHO 44 PLATE DRY CELL IS USED BUT IN VERY GOOD CONDITION. VERY LITTLE USE. This is a 44 plate Dry cel. the picture is of one identical but smaller. 44 Plates of 316L Stainless Steel Plates* Demensions: 12*6*6 inch* High temperature Cast Acrylic end Plates* Quad 1/4" 90 Degree Bronze Elbows with Hose Barbs* Neoprene Rubber Gaskets* Net Weight: 3kg* Our Dry Cell is expandable. Plate size is 4*4 inch* Plate's thickness: 1.2mm/18 Gauge* Production: 1LPM to 6LPM. Working at 10v to 30v. 3amp to 50amp. SHIPPING: YOUR ITEM WILL BE SHIPPED WITHIN 48 HOURS AFTER PAYMENT IS RECEIVED. YOU WILL RECEIVE AN EMAIL FROM US AFTER WE SHIPPED THE ITEM. WE WILL GIVE YOU THE TRACKING NUMBER SO YOU CAN FOLLOW YOUR ITEM VERY EASILY. PAYMENT: PAYPAL IS PREFERRED. PLEASE TRY TO MAKE THE PAYMENT WHEN YOU PURCHASED ... moreTHE ITEM OR IN 48 HOURS. PLEASE MAKE THE PAYMENT SOON THAT YOUR ITEM CAN BE SHIPPED TO YOU AS SOON AS POSSIBLE. SERIOUS BIDDERS ONLY PLEASE. THANK YOU. Return Policy: If you are not completely satisfied with your product simply return it with all accessories. Original packaging and manuals in"like new" condition within 48 hours of receipt for a refund, minus postage and handling and a 7% restocking fee to cover eBay and associated fees. products, accessories, original packaging or manuals not returned in original condition or showing signs of use or abuse will be subject to a 20% restocking fee. Return postage is the responsibility of the Buyer. Please take a moment to read our"Terms and Conditions" before you bid or buy. Terms and Conditions: TERMS AND CONDITIONS PAYMENT We only accept PayPal. Most major credit cards are accepted through PayPal. NON PAYING BIDDERS m. Non-paying bidders will be reported to eBay. Payment is expected no later than 3 days after the close of the auction. SHIPPING Usually your order will be shipped in 24 to 72 hours.But in most cases, we ship them out in the same day it is received Monday thru Saturday. We do not combine shipping. TRACKING NUMBERS You will receive a tracki
|
|
|
800x600 Surrey. Council, Corporate Reports, Regular Council, 2012 14.00 Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE Experimental Hydrogen Fuel cell unit. Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE
|
|
|
atago pocket pal 40-s sodium hydroxide digital meter great for measureing naoh in youre hydrogen generator works good
|
|
|
This is a H2o hydrogen generator kit that I purchased to convert your automobile engine to run on water. These were popular years ago when the gas prices sky rocketed. I have never used it or tested it. It has new components such as the water bottle filter cartridge w/SS plates(generator) Amp meter gauge, a back flow check valve and the starter solenoid. There is also some SS fittings. Bid accordingly for parts or whatever. See the photos. What you see is what you will get. Low starting bid& shipping. Shipped to the lower 48 states only. NO International Bidders Please. All sales are final with NO returns. Good luck bidding!
|
|
Plug Power SU1 hydrogen fuel cell generator plant. Has a large methane reformer section to convert natural gas to hydrogen. 5kw PEM fuel cell stack that outputs DC power, and a power inverter and battery bank to make AC power output. Tons of interesting goodies inside for the backyard inventor/scientist/experimenter. If nothing else there is about 20 kilograms of catalyst beads and also the PEM membranes that are full of platinum and rhodium. Govt surplus from research project. Has been in storage several years. Although it appears complete, due to the complex specialized nature of this type equipment it is impossible for me to test, therefore it is being sold as pictured in as-is condition for parts or repair. I may have access to several more of these units in time. Located near Fort Worth. ... moreTX Viewing welcome. Local pickup is encouraged. Because of weight of this item it can only be shipped truck freight. If you want it shipped, you the buyer are 100% responsible for making and paying for your own shipping arrangements from zip code 76112. I can deliver up to 100 miles radius of 76112 for $2.mile. Shipping weight is near 2800 pounds Size is about 6' long 40"wide and 6' tall. USA bidders only!
|
|
|
FOR SALE A USED PAIR OF HYDROGEN GENERATORS. THESE SELL FOR $58.00 A PIECE NEW. THEY ARE HYDROCLUB USA HHO DRY CELL HYDROGEN GENERATORS. I INSTALEED THE KIT ON MY DODGE TRUCK AND THEY WORKED GREAT BUT SOLD MY TRUCK TO GET A DIESEL TO PULL A LARGE BOAT. THESE ARE 9 PLATE STAINLESS STEEL GENERATORS. JUST ADD THE 12VDC POWER AND WATER AND WATCH THE HYDROGEN GAS COME OUT. THESE WILL INCREASE YOUR MILEAGE. JUST PLUMB THEM INTO YOUR INTAKE AND WATCH THE MPG GO UP. WILL NOT HURT YOUR CAR. GET 2 FOR LESS THAN THE PRICE OF ONE PLUS FREE SHIPPING.
|
|
Plug Power SU1 hydrogen fuel cell electric generator plant. Has a large catalytic methane reformer section to convert natural gas to hydrogen. 5kw PEM fuel cell stack that outputs DC voltage, and a power inverter and battery bank to make AC power output for grid connection. Tons of interesting goodies inside for the backyard inventor/scientist/experimenter. If nothing else there is about 20 kilograms of catalyst beads and also the PEM membranes that are full of platinum and rhodium. Origional cost was approximately $100,000. Untested Government surplus from a research project. Has been in storage several years. Appears complete but due to the complex specialized nature of this type equipment it is impossible for me to test, therefore it is being sold as pictured in as-is condition for parts ... moreor repair. This doesn't mean its broken, just that I am not able to test functionality. I may have access to several more of these units in time. Located near Fort Worth. TX Viewing welcome. Local pickup is encouraged. Because of weight of this item it can only be shipped truck freight. If you want it shipped, you the buyer are 100% responsible for making and paying for your own shipping arrangements from zip code 76112. I can deliver up to 100 miles radius of 76112 for $2.mile. Shipping weight is near 2800 pounds Size is about 6' long 40"wide and 6' tall. USA bidders only!
|
|
|