|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Use this gasket material anywhere parts must be sealed to prevent leakage. Can be used on vehicles, tractors and in many other applications. Works well on water outlets, oil pan, timing cover, rear axle housing, fuel pump and more.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Cold Patch, Product Type Cold Patch, Base Material Recycled Asphalt Mix, Cure Type Pressure, Container Size 50 lb, Container Type Bag, Coverage 2 sq ft @ 3 in, Color Black, For Use On Surface Material Asphalt, Standards DOT Approved, VOC Content 0 g/L, Flash Point Greater than 622.4 Degrees F, For Use With Asphalt, Maximum Application Temperature 105 Degrees F.
Buy It Now
Free Shipping
Condition: New Location: Spartanburg, United States
XFasten Indoor Outdoor Carpet Tape for Area Rugs | 2" x 60 Yards.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Thread seal tape — commonly known as "Teflon tape", "PTFE tape" or "plumber's tape" — is a polytetrafluoroethylene (PTFE) film cut to specified widths for use in sealing pipe threads. The tape is wrapped around the exposed threads of a pipe before it is screwed into place.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
【Easy Installation】 Easy Peel and Stick application. Easy peel and stick application.
Buy It Now
Free Shipping
Condition: New Location: Magna, United States
This Pasco 9052 Tape is perfect for all your pipe wrap needs. Measuring 2 inches by 100 feet and made of 10mil PVC, this tape provides all-weather protection for your pipes. It's suitable for use in various industries, including business and industrial settings. The tape's brand is Pasco, and it comes in a unit type of feet. The package does not include a battery.
Buy It Now
$6.49 Shipping
Condition: New Location: Grand Forks, United States
The M12 10oz Caulking Gun Adapter for Quart Tubes is a carriage that holds quart-sized tubes of caulk or construction adhesive. It attaches to the M12 cordless caulking gun and increases the number of different products you can dispense for your projects.
Buy It Now
Free Shipping
Condition: New Location: Fredericksburg, United States
Superior Performance: Brush-on super glue with a patented additive works faster and holds stronger than ordinary adhesives.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
( 2 Pack ) Flex Seal MAX Aerosol Liquid Rubber Sealant Coating, 17 oz each ( 34oz Total), WHITE Flex Seal is actually liquid rubber in a can. It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Flex Seal coats, seals, protects and will stop leaks fast. It’s like a Handyman in a can.
0 bids Free Shipping
Condition: New Location: La Habra, United States
Quikrete Concrete Crack Sealant 1 Qt. Quikrete 1 Qt. Concrete Crack Seal is used for repairing cracks in concrete driveways, patios and sidewalks. The crack seal can be applied directly from the bottle and is gray in color to blend with the natural color of concrete.
Buy It Now
Free Shipping
Condition: New Location: Garden City, United States
STIKK Tape Duct Tape is a tough, versatile, and easy to use cloth duct tape. The PE coated backing and natural rubber adhesive provides an effective and long lasting hold in a wide range of temperatures both indoors and outdoors.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Buy It Now
$4.40 Shipping
Condition: New Location: Shipshewana, United States
FLEXIBLE ADHESIVE. VINYL, FABRIC, AND PLASTIC. Dries to a transparent and waterproof bond.
Buy It Now
Free Shipping
Condition: New Location: Clawson, United States
Gorilla All Purpose Wood Filler, 16 Ounce Tub, Natural (Pack of 1) - by Gorilla Glue.
Buy It Now
Free Shipping
Condition: New Location: Gadsden, United States
GE All Purpose Window and Door Silicone 1 sealant is a 100% silicone and 100% weatherproof caulk that is ideal for areas that could be exposed to harsh weather conditions. Ideal caulking for windows, doors, siding, trim work, and more.
Buy It Now
Free Shipping
Condition: New Location: Ferndale, United States
Debonder, 2 oz. Thin, 2.25 oz. Thick, 2.25 oz. Jel, 2.25 oz. Complete starter kit in a hardshell case! LOCAL PICKUP NOT AVAILABLE. 10 second bonding. 30 seconds to cure.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
Protected storage container for 12 caulk / grease tubes. Helicoil Thread Kits. Credit card information is always encrypted during transfer over networks. You agree to indemnify, defend and hold harmless J and B Tool Sales and our parent, subsidiaries, affiliates, partners, officers, directors, agents, contractors, licencors, service providers, subcontractors, suppliers, interns and employees, harmless from any claim or demand, including reasonable attorneys?.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Versatile And Dependable: Perfect For Indoor Or Outdoor Use, Epoxy & Adhesives, Plastic, Composite, Pvc, And More. Plastic Bonder Makes A Great Gap Filler And Dries Black In Color. Count On Us: For More Than 40 Years, Our Products Have Earned A Loyal Following From People Who Take Pride In Their Work.
0 bids Free Shipping
Condition: New Location: Ridgewood, United States
This Belzona 1212 product is perfect for your adhesive needs. It is a liquid glue or cement that can be used for various applications. With a quantity of two units, you can ensure that you have enough to complete your project. The brand, Belzona, is known for its high-quality products, so you can trust that this glue will get the job done. The model number of 1212 makes it easy for you to search and identify the product. This is a great addition to any business or industrial setting, and it falls under the category of adhesives, sealants, and tapes. Trust in the reliability of this product without worrying about its condition, as it is new and ready to be used.
0 bids $4.95 Shipping
Condition: New – Open box Location: Chillicothe, United States
Item DetailsCoroplast Wire Harness Tape 8440X. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Specialty Services. Pottery & Glass.
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
It provides significant resistance to mildew, cracking, peeling, and chipping. Rejuvenates and maintains roof appearance and color. May be applied with roller, brush, squeegee or sprayer.
Buy It Now
Free Shipping
Condition: New Location: Clawson, United States
ScotchBlue TA3-SB Painter's Tape Applicator Blue, with 1 Starter Roll, 1.41 in. x 20 yd ( 00638060262245 , 00638060262245 , 00638060262245 , 50638060262240 , 70638060262244 ).
Buy It Now
Free Shipping
Condition: New Location: East Syracuse, United States
MATERIAL: This plumbers tape is made of high density PTFE material for good stability. FEATURES: The thickness of the plumbers tape is thicker than the ordinary teflon tape, and the sealing performance is better,and the thread seal tape has the characteristics of corrosion resistance, aging resistance.
0 bids Free Shipping
Condition: New Location: Bensenville, United States
Package contents: ---1 Roll of Teflon adhesive tape, 1" x 33feet (25mm x 10m) ---0.18mm thickness Main Applications ---A. Coating of various high-temperature rollers, heating sheets, and de-moulding work-piece. ---B. Sealing of foods, chemicals, and plastic bags. ---C. Pad pasting for sliding chute, hopper, and aviation molds, also suitable for rollers of sizing machines and thermoplastic de-moulding. It can be repeatedly used and is easily replaceable. ---D. Suitable for surface treatment requiring anti-sticking, anti-corrosion, and high-temperature-resistant surface. ---E. Applied in the fields such as packaging, thermoplastic, compound, and sealing, electronics.
0 bids Free Shipping
Condition: New Location: 闵行区, China
Waterproof, leak-proof, good sealing, corrosion-resistant. All pictures are for illustration purpose only and Colours may vary slightly. Color: light blue. You can follow below process to chontact us.
Buy It Now
Free Shipping
Condition: New Location: Columbus, United States
Black Vinyl Acoustical Insulation Tape is perfect for use with Noise Grabber Mass Loaded Vinyl as a way to seal seams and prevent sound travel between seams of MLV. This product is not meant to be used as a standalone soundproofing product. Each roll measures 2 inches wide and 108 feet long, allowing long usage for each roll. This PVC tape can also be used as a sealing tape for other vinyl applications.
Buy It Now
Free Shipping
Condition: New Location: Baptistown, United States
Permatex 59214 High Temperature Thread Sealant. Each Permatex Thread Sealant is a HIGH TEMPERATURE thread sealant. Permatex thread sealant also prevents rusting, corroding. Permatex Thread Sealant is an eye and skin irritant.
0 bids Free Shipping
Condition: New Location: Hollywood, United States
It is especially useful for high viscosity materials that are hard to extrude, like hybrid adhesives and epoxies. It has an ergonomic rubber trigger and push release for better comfort and grip.
Buy It Now
Free Shipping
Condition: New Location: Brandon, United States
Model Weatherstrip and Gasket Adhesive. BONDS weatherstripping, headliners, gaskets and more. Material Adhesive. Size 5 fl. Color Black Super. Style Black Super. RESISTS oils, solvents, detergents and temperature changes for permanent repairs.
Buy It Now
Free Shipping
Condition: New Location: Dallas, United States
Product Description Elmer's Damaged Wood Repair System Wood Filler - Elmer's 2-Part Epoxy Damaged Wood Repair. Structural, simple, one-to-one mix. 100% Waterproof. Drill, screw and nail. Sandable, stainable, paintable. Non-toxic. No-run. Excellent for both interior and exterior repairs. - Color: Light Tan, Container Size: 2 - 6 oz., Material: Epoxy Resin and Epoxy Hardener, Pkg Qty: 1, Package Type: Box For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality. From the Manufacturer Adhesives and sealants have been Elmer's specialty. Our packages and products have been a familiar sight in workshops and craft rooms across the country for 60 years.
Buy It Now
Free Shipping
Condition: New Location: Bowling Green, United States
Buy It Now
Free Shipping
Condition: New Location: Fort Lauderdale, United States
Mixed at a ratio of 1-1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hoursto a dark grey color. A full cure is reached in 15-24 hours.
Buy It Now
Free Shipping
Condition: New Location: , United States
Manufacturer : XFasten. Withstanding up to 290F, our white RV sealant caulk lasts up to 5 years with top-notch sealing performance but still REMOVES CLEANLY, making this putty seal tape durable but removable.
Buy It Now
Free Shipping
Condition: New Location: Greensboro, United States
FLEX TAPE is a super strong waterproof tape that can instantly patch, bond, seal virtually anything. It can be applied on dry or wet surfaces and it even works underwater! Has a thick, flexible rubberized backing that conforms to any shape and object.
Buy It Now
Free Shipping
Condition: New Location: Glen Ellyn, United States
PC-11 is a white, marine grade paste epoxy that bonds and cures, wet, dry and underwater. PC-11 is a simple 1:1 mix. The epoxy can be shaped and molded and machined and painted after cured. Bonds to unlike surfaces.
Buy It Now
Free Shipping
Condition: New Location: Brookeville, United States
Paintable in just 30 minutes.
Buy It Now
Free Shipping
Condition: New Location: Longwood, United States
5 Color fluorescent rainbow stack, Fluorescent Pink, Green, Orange, Blue and Yellow. Pro Pocket Gaff Tape is a rubber based impregnated cloth tape with a matte finish. High visibility colors for marking of stairs, exits or sets.
0 bids Free Shipping
Condition: New Location: Tampa, United States
Nice Performance: the adhesive fabric tape has nice noise reduction and heat insulation performance, very suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection.
Buy It Now
Free Shipping
Condition: New Location: , United States
Suitable :Fills asphalt, concrete and expansion-joint cracks 1/4 in. to 1/2 in. Dia; Fill your blacktop cracks & joints permanently; For small asphalt, concrete cracks. Use Location : Driveway; For small asphalt, concrete cracks.
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
Free Shipping
Condition: New Location: Charlotte, United States
Our tape is fresh and made in the USA by major manufacturers. MADE IN THE USA! This tape is factory seconds. The label is blackened or removed from the core. This tape is fresh and is made in the USA.
0 bids Free Shipping
Condition: New Location: Stockton, United States
And 56 oz.
Buy It Now
Free Shipping
Condition: New Location: El Monte, United States
5 Color Vinyl Electrical Tape Insulation Adhesive Tape. Dielectric strength: > 39.37 KV/mm (1000 v/mil). Temperature class : 0℃~80℃. Cable Color : Yellow Red Green Blue Black.
Buy It Now
Free Shipping
Condition: New Location: , United States
The acid-free formula provides one-line coverage without producing copy or fax shadows. Excluded are Alaska, Hawaii, Puerto Rico, APO/FPO, PO Boxes and International locations.
0 bids Free Shipping
Condition: New Location: Winona, United States
Excellent for sealing or creating gaskets. Bonds to most surfaces.
Buy It Now
Free Shipping
Condition: New Location: , United States
Made to dry clear, the adhesive can be used to bond transparent or translucent plastics. The adhesive is easily applied directly to surfaces from the tube. This single-component trim adhesive is ready to use without any mixing.
Buy It Now
Free Shipping
Condition: New Location: Charlotte, United States
Tapered tip can be cut for bead size. High-Efficency Square/Quadro single-use Mixing Nozzles (static mixes) with 50% less waste.
Buy It Now
Free Shipping
Condition: New Location: Clawson, United States
Permatex 80345 White Lithium Grease, 1.5 oz. - by Permatex.
Buy It Now
Free Shipping
Condition: New Location: Denton, United States
1 ROLL RESCUE TAPE Self-Fusing Silicone Repair Permanent Waterproof 1" x 36 ft. This durable, black elastic tape has excellent electrical properties, water resistance, ozone resistance, and corrosion resistance.
Buy It Now
Free Shipping
Condition: New Location: Miami, United States
For securing electrical devices, use Gardner Bender 1/2 in. The low-lead PVC tape is rated for up to 600-Volt and is both UL. Electrical tape is also CSA listed. For general purpose electrical applications.
0 bids Free Shipping
Condition: New Location: Jamaica, United States
Situated at the industrial hub of India we specialize in providing complete tooling solutions. Our Advice :Check with ACTOOLS before you buy from anywhere else. Loctite 609 50ml High Strength :-. Typical applications include rotor to shafts in fractional and subfractional horsepower motors.
Buy It Now
Free Shipping
Condition: New Location: Brownwood, United States
DAX Lift Reflective Decal Kit. Introducing the new DAX Lift Safety Reflective Decal Kit. These high quality microprismatic vinyl stickers are easy to apply and provide high visibility for workers. The wraparound stickers for hard hats are ideal for night workers because they make workers more visible.
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Blue Monster PTFE Thread Seal Tape is a blue color-coded, professional-grade density thread sealing tape for thousands of applications. Blue Monster is not to thick and not too thin. It was developed by Mill-Rose in response to the demand for a higher-quality PTFE thread sealing tape that is easier to apply ensuring dependable, leak-proof joints.
Buy It Now
Free Shipping
Condition: New Location: Seattle, United States
Painting tape rolls are made of non-toxic, acid-free, and odorless crepe paper. Efficiently prevents paint bleeding. Premium Material: Our painters tapes are constructed of high-quality crepe paper and are suitable for use both indoors and outdoors.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Magic Crack is easy to use and has no shelf life so it's great to keep on hand. Magic crack filler. Installs easily. Fill hairline cracks. A+ Service! Certified Security.
Buy It Now
Free Shipping
Condition: New Location: , United States
Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours.
Buy It Now
Free Shipping
Condition: New Location: Olney, United States
NEW Waterproof Tape Rubberized Super Strong Tape, 4 Inches X 5 Feet, Black
Buy It Now
Free Shipping
Condition: New Location: Sandy, United States
HENKEL LOCTITE 404 INSTANT INDUSTRIAL ADHESIVE SUPER GLUE.
Buy It Now
Free Shipping
Condition: New Location: , United States
INDUSTRIAL GRADE - Provides excellent holding power for heavy-duty packaging and shipping, easy to use shipping tape that will not split or rip during application. STANDARD CORE - The clear packing tape rolls have a standard 3 inch core which is a common size for most tape dispensers. CLEAR PACKAGING - This multipurpose clear tape will keep your packaging nice and professional. ACRYLIC TAPE - The clear acrylic tape offers a high performance longevity which is ideal for cold storage applications. MULTIPURPOSE TAPE - The high quality tape can be used for many jobs such as packing, storage, organizing and moving.
0 bids Free Shipping
Condition: New Location: Dayton, United States
Capacity: 30ml. It can also prevent vibration. Airtight and Dust-Proof: With the features of strong, durable, airtight, dust-proof, and waterproof, our liquid electrical tape can ensure the safety of electrical connections.
|
|
|
Coast to Coast Industrial C2Cindustrial.com rgnoll@comcast EST. 1998 Offered is a used 3m Jet Weld II Heated Adhesive Applicator Gun. This unit is in great used condition. Electrically heated pneumatic applicator dispenses adhesive at 250 degree F. For wood, plastics, and metal applications. Thank you in advance for your consideration& Bids on our offering. We are always striving to offer something aside from the standard fare for the needs/ interests of the Business and Private Folk. TERMS Notice* Bid Placement Indicates: You have agreed to the following terms: Buyer pays shipping costs of $20 to Lower 48 US States. Includes insurance. Local pickup can be arranged. As well as delivery for a reasonable fee(up to 50mi) Pickup and deliveries can be scheduled Monday through Friday. Saturday ... morepickups require scheduling. Notice* Our Business Hours: 9am- 6pm Monday thru Friday(some Saturdays) Notice* We are Not available on Sundays. Washington State Sales Tax is required and added to all Washington Sales. Unless a resale or manufactures certificate is provided. Payment is expected/ required within 3 days via Paypal& 5 days if via Postal Mail. We do not offer COD. Items are paid in full before shipping. Payments can be made thru Paypal. Shipping to a confirmed address may be required at our discretion. We also accept both business and personal checks as well as certified checks. Wired funding may be accommodated. We do Not take Credit Cards directly. Personal Checks Clear Before Shipping. As do Cashiers Checks(we verify authenticity) We welcome International buyers on many items. Please check with us prior to bidding. A Suggestion for Bidders/ Buyers with Email Filters. Spam Blockers, etc. If you are a bidder&or buyer of one of our items. It will be in your best interest to add our email address to your"Approved" list, otherwise you may not receive our emails. If you don't hear from us within 24hrs.it is most likely our emails are being blocked by your server. We are very diligent in our em
|
|
Techco Digital Fluid Dispenser TDS-984 Please refer closely to all photos before purchasing. Used. Good condition, light cosmetic wear, tested to power up. Digital fluid dispenser by Techco. Model TDS-984. Note that this unit is wired for 220 VAC power only. Thanks for looking- we appreciate your business! Please check out on eBay. Please Read: Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description. The images show the ACTUAL or an ACCURATE REPRESENTATION of item that you are bidding on. All images are photographed by us and are the exclusive property of TELEVISIONARY Communications and/or The Reuseum. Use of any material in ... morethis advertising is prohibited without express permission. Unless otherwise stated above. This item is sold strictly"AS IS, with no warranty. We TRULY& HONESTLY try to represent our auction items to the best of our abilities. Please understand that we are sometimes unfamiliar with an item. That said. You might notice times that the description is very brief or nonexistent. To compensate for our lack of expertise we start prices very low, with the intent that you might be interested in the item for its parts and AS IS condition. Please take this in consideration when bidding on our auctions. We try to take weekends off in order to preserve our marriages. If this auction is scheduled to end during the weekend. We'll be in contact with you on Monday. If you have technical questions, or need shipping quote information about this or any of our other auctions, please try to ask them by Friday morning. Any technical or shipping questions received over the weekend most likely will not be answered before the close of the auction. Shipping Information: Bidders outside the Continental U.S. including bidders in Alaska. Hawaii, Puerto Rico& our friends in Canada) MUST contact us to determine(non-freight) shiping costs! Any
|
|
|
EFD model 800 Just what is in picture is included Posted with
|
|
|
Nordson Module Used(AN95J. AN97K, AN98H) O-Rings missing on some These are used condition and have not been tested. The listing is for one Module. Please specify which one you want when you buy it. Listing will updated as they sell. Offers are also considered.
|
|
GRACO D200 SUPPLY SYSTEM CM9A59 IN GOOD WORKING CONDITION SERIES G10A Technical Specifications. Technical Specifications Volume per cycle. 192 cm3(11.7 in3) Cycles per 3.8 l(1 gal) 21 Fluid flow at 60 cpm. 10.6 lpm(2.8 gpm) Max fluid working pressure 23:1. 159 bar(2300 psi. 15.9 MPa) 36:1. 248 bar(3600 psi. 24.8 MPa) 68:1. 345 bar(5000 psi. 34.5 MPa) Max air input pressure 23:1. 7 bar(100 psi. 0.7 MPa) 36:1. 7 bar(100 psi. 0.7 MPa) 68:1. 5 bar(74 psi. 0.5 MPa) Fluid inlets without feed kits.1-1/4 npt(m) Max operating temperature Pump and platen. 70°C(158°F) Hoses. Valves and regulators. 100°C(212°F) Air inlet size. 1/2 in npsm(f) Pump fluid outlet size. 1 npt(f) Power requirements Compressed air. 700-1500 ltr/min Electricity voltage. 230 Volt. 1 phase, 50/60 Hz Peak consumption. ... more7.92 Kva Manuals. 313296
|
|
What a cool find. I have sold alot of melters. Never had one this big or as new before. It comes with just about everthing you will need to set it up. There are two sections with three piston pumps and three melting chambers each. It all works together. One unit has the Allen Bradly CPU for both units. Ltech system type KP-56/3 The manual says it works with any of todays melts. Built in Germany 2011. It runs on 400 volt 60HZ 3 Phase. Comes with a 480 to. 400 volt Y transformer to run the whole thing. Also has the switch gear and fuse box. You are also getting the heated hoses. Control cables for each hose that go from the machine to whatever type of applicator you are using. and some type of manifold. Althhough the manifold was designed for something specific you probably wouldn't use ... moreit, but it sure looks expensive. When I picked up the machine the Allen Bradly panelview was missing. So I picked up a new 700 series series to replace it. You will have to reprogram the system it to meet your application. Something I know nothing about. I'm assuming if your looking at this you probably know more about it than I do. I do have the manuals with specs that I can email to you. The second unit. Melters 4, 5, and 6 have never been used. The last picture is of the melting chamber. I can't even guess what this system cost. I got a great deal on this so you do to. I didn't count the hoses or cables when I put them in the crates I built for them. Assume your going to spend some money setting this up. But for the price I'm selling it for you can live with it. As is I'm 10 miles west of Milwaukee 53151 if you would like to inspect or pickup. Paypal or credit card for 1000 deposit. Balance by wire or good check unless you want to pay the 3% fees. Will ship. Jeff 262 227 7774
|
|
|
RED HEAD ADHESIVE ANCHORING SYSTEMS- E102 DISPENSING TOOL- IT IS MADE IN THE US AND IS ITW/RAMSET/RED HEAD DOUBLE CYLINDER TYPE DISPENSER. I USED IT AS A MECHANIC BUT NO LONGER NEED IT IN MY PROFESSION. RED HEAD ADHESIVE ANCHORING SYSTEMS. E102 DISPENSING TOOL. ITW RAMSET/RED HEAD FLAT RATE INSURED AND TRACKABLE SHIPPING IN THE US. EXCLUDING ALASKA AND HAWAII $8.75 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e28a5e785-0xfe-
|
|
THIS IS A NICE HILTI P5000 Adhesive/Epoxy Dispenser IN NICE SHAPE! CAME FROM A BUSINESS BANKRUPTCY. WORKS GREAT! SAVE $$ WHATS INCLUDED: HILTI P5000 GUN AS SHOW.BEEN CHECKED AND WORKS GREAT! Comes as shown in pics! Thanks Payment: All payments must be received within 1 day of the end of the auction. Seller retains all rights to withdraw an auction or deny sale of the merchandise. A Positive Feedback will be left for all successful transactions. By placing a bid on this auction. You agree to all the terms and conditions of the auction. If you have any questions or concerns please ask us before placing bids. PAYPAL only. Ship to confirmed/Verified address only. No Personal checks. Shipping: Item Shipped from: Portland. OR. LOWER 48 Only.All other destinations will be an extra charge. Thank you. ... moreItem will be shipped within Three business days from the completion of auction. Order will be processed within two business days. I ship to PayPal Verified/Confirmed address only. No Exceptions. If a package is returned to us due incorrect address or recipient non-availability to accept. There will be a shipping charge to ship package for the second time even if the original sale was shipped free of charges. Terms of Sale: 14 day return policy! Email confirmation must be received within 24 hours after the end of auction! Warranty through manufacturer if available. Posted with the
|
|
|
EFD Valvemate 7000 dispenser control with dispense head. Removed from working system. Item shows wear from normal use. Dispense head does not have any model markings. Dispense head contains cured RTV sealer and needs to be disassembled and cleaned.
|
|
For your consideration is a ITW Ramset/ Red Head Epcon Epoxy Anchoring Systems E101 Injector Tool. Good used condition. Thanks for Looking. Don’t miss out. Bid Now! Our Basic Policies We do not ship internationally, We pack as carefully as possible& according to post office recommendations. Insurance is up to the buyer to request prior to paying. If damage occurs you will need to bring all original packing to the post office for your claim. Our preferred method of payment is Pay Pal, Sorry NO Personal Checks, We will ship your item(s) within 1 business day after cleared payment, We expect payment within 3-5 days. If after 7 days unpaid we will open an unpaid item case, unless other arrangements have been made, All items are also available for free local pick up, We will combine multiple ... morepurchases whenever possible& save you $ on shipping, All measurements are approximate, Our Return Policy We offer a 14 day return policy, It is buyer’s responsibility to pay return shipping cost. With the item properly packaged& returned in the same condition it was shipped, We can work it out We are not perfect nor experts. Every effort is given to accurately describe the item(s) and its condition. If any misunderstanding does arise, I believe communication is the best method to resolve any issue, contact us. Our feedback is 100% positive and we’ll make every effort to keep it that way! Thanks again for your bidding! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
EFD 800 Fluid Dispenser This listing is for one. There are multiple units for sale so pictures may vary. EFD or Compatible with EFD All are used and show some signs of use but are working. Includes: Time pressure control unit Foot switch Air line(you will supply the proper hook to your air source. Power cord Dispense line and syringe adapter(Tell us what syringe size you want to use and we will try to accommodate the size at no extra charge and send a selection of tips from our inventory. Free of charge) Input voltage: Selectable 100/120/220 VAC 50/60Hz 26/20 VA Air input: 80 to 100 psi(5.5 to 6.9 bar) Internal voltage: 24 VAC Foot pedal voltage: 24 VAC 7¼ x 8½ x 2⅝" 3 lb 4 oz(18.4 x 21.6 x 6.7 cm) 1.48 kg) Air output: 0 to 100 psi(0 to 7.0 bar) Shipping: I do combine shipping ... moreon most items where possible. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
THIS WAS USED FOR ONE PRODJECT AND HAS BEEN SITTING AROUND SINCE. IT IS IN LIKE NEW CONDITION PERFECT WORKING ORDER ALL YOU NEED IS 4 AA BATTERIES. Even bead technology, No-drip tip design, Two speeds, Easy-load barrel, Powered by four AA batteries, Smooth and even caulk flow, Prevents messes, Quick tube replacement, Easy caulk gun control, For cordless convenience, Powered Caulk Gun, Tube Carrier, sealing tubs and sinks, sealing doors and windows, caulking trim and moulding after painting, FOR BEST DESCRIPTION CHECK OUT THE PICTURE.THEY ARE OF THE ITEM YOU WILL RECEIVE. IF YOU HAVE QUESTIONS OR NEED MORE INFO PLEASE ASK BEFORE YOU BID. BIDDERS OUTSIDE THE U.S. MUST PAY WITH PAY-PAL. THANX FOR LOOKING AND GOOD LUCK.
|
|
|
IN LIKE NEW CONDITION. COMES WITH BOX AND MANUAL.
|
|
Tridak Adhesive Dispencer Controller Model 450A 115V 60Hz.25A 40/60 Pressure Item is incomplete. And will need repairs prior to use. As a result we are selling this item AS IS for a parts or repairable item. This listing is for(1)Tridak Adhesive Controller PARTS/REPAIR. ShelfM4 0213852JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, ... moreand fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
|
|
|
Sheepscot 9450 Potting Machine. Double Acting Meter/Mix and Dispense System, Approx. Ratio 14 to 1 The Model 9450 double-acting meter. Mix and dispense system provides continuous fluid output, which is a critical feature for satisfying the large output demand. With pneumatic supply pumps, and a low-viscosity epoxy supplied by Gougeon Brothers(Bay City, MI) Sheepscot determined that the Model 9450 could deliver upward of 1 gallon per minute of mixed material. This it em is complete and in good working condition
|
|
SquareTrade © AP6.0 IWASHITA IEI AD2000D AUTOMATIC DISPENSER AD 2000D Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 ... moreNormal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 This unit powers up. We sell it AS-IS, what you see in the pictures is the actual item you are going to receive.1529) Surplus Tech Mart is located in Israel. And we ship from Israel. Shipping time to the United States is typically 3-10 business days once your shipment has been received by the carrier. We ship worldwide with DHL or EMS. Items are shipped within 1-3 days of payment receipt. However. Most items ship within 1 business day. All items are packed professionally with bubble wrap and sturdy boxes. Please kee
|
|
|
THIS IS AN ADHESIVE INJECTOR GUN WITH ADJUSTABLE FLOW RATE IN GREAT WORKING CONDITION. SHIPPING TO THE LOWER 48 STATES ONLY.
|
|
|
Just in from a local aerospace company sale comes this Kahnetics KDS 834 Shot Meter w NEW treadlite T-51-SC36 foot Pedal. Payment due immediately/ Local Prepaid Pick-up available 8am-12noon weekdays from 91355/ CA sales tax required/ International welcome Paypal only/ 7-1
|
|
|
HILTI HDM 500 epoxy Dispenser gun in great condition. Comes with a epoxy pack. As seen in pics.
|
|
ITEM DESCRIPTION 1 USED NORDSON 220002 GLUE GUN BUTTON NOZZLE. SEE PHOTOS! RR1-2*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any overnight ... moreshipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selection of hydra
|
|
ITEM DESCRIPTION 1 USED NORDSON C274731A/15851 RTD SENSOR. WE ARE NOT SURE IF THIS IS NEW OR USED. SO WE ARE SELLING IT AS USED. SEE PHOTOS! RR1-2*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will ... moreno longer use your account number with Fedex or UPS for any overnight shipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife a
|
|
ITEM DESCRIPTION 1 USED NORDSON 271-596( STRAIGHT CONNECTOR. WE ARE NOT SURE IF THIS IS NEW OR USED. SO WE ARE SELLING IT AS USED. SEE PHOTOS! RR1-2*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I ... morewill no longer use your account number with Fedex or UPS for any overnight shipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, F
|
|
ITEM DESCRIPTION 1 LOT OF 2 USED NORDSON GLUE GUN NOZZLES. ONE PART NUMBER IS 238500 AN THE OTHER PART NUMBER IS UNKNOWN. SEE PHOTOS! RR1-2*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer ... moreuse your account number with Fedex or UPS for any overnight shipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many
|
|
ITEM DESCRIPTION 1 USED NORDSON 220003 GLUE GUN BUTTON NOZZLE. SEE PHOTOS! RR1-2*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any overnight ... moreshipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selection of hydra
|
|
ITEM DESCRIPTION 1 USED NORDSON 231003E SA02J GLUE GUN SPRAY NOZZLE. SEE PHOTOS! RR1-2*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any ... moreovernight shipments. PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selection of
|
|
|
3M JET WELD GUN WORKS BUT HANDLE IS BROKEN LOT 558. We had these at our company and I did not even know that it was broken until a dropped it and it broke off again. The gun does work but needs a nozzel. You can fix it or use it for parts. Thanks for looking.
|
|
Hello and Welcome! Up for sale is a MINT CONDITION Hilti MD2000 epoxy gun. Box, manuals and nozzle, everything you see in the photos, perfect, clean condition! Bought brand new and used for 1 small job. Made in Switzerland! The photos are the BEST description of the item and are MORE IMPORTANT than my written description! Try the"ZOOM" feature. It is a great way to take a closer look. Item comes ONLY what is in the photos. If it is not in the photos, it does not come with the item. Any paper currency or coins in photo(s) are for size comparison only and not included in sale. If you need additional photos, no problem! Questions? Just ask! RETURNS: I only accept returns under the following condition. 1. I made a significant error in the listing description that significantly changes ... morethe value of the item-OR- 2. If I sent you the wrong item. I DO NOT accept returns for any other reason such as; you changed your mind. You didn't like the color, it didn't fit you, you no longer want the item. Buyer is responsible for all return shipping charges SHIPPING: All shipping quotes are to lower 48 US States, AK and HI will cost extra. I do not ship internationally on this item. FEEDBACK: By bidding on this item. You are contractually agreeing that you will not leave negative feedback before you have contacted me and given me the opportunity to resolve any issues you might have. I strive to have a stellar eBay reputation and I look forward to serving you the best that I can. Very rarely does an issue arise that I cannot resolve to your satisfaction. TERMS: PLEASE READ! I try to describe items to the best of my ability however I am NOT an expert but I can sure talk. If you ever want to talk about an item I have listed. Send me an email and I will send you my number. PLEASE ASK QUESTIONS and I will try to help! Photos are the best description of the item and photos take precedent over written item description. Please ask questions before placing a bid, not after! Many of our items are for sale locally and we re
|
|
Electron Fusion Devices EFD 1500XL Fluid Liquid Expoy Adhesive Dispenser Module The 1500XL dispenser increases yields and reduces rejects in fiber optic assembly processes by using a timed air pulse to apply the same amount of adhesive on every part. Unlike hand syringes. Dental picks and other manual tools that rely on operator judgement to control the amount of adhesive applied, the microprocessor-based 1500XL makes it easy for any worker to make accurate, consistent deposits as small as 0.008 inches in diameter. Operation of the 1500XL is simple and efficient. The dispenser console is connected to compressed air and electricity. And adhesive is loaded into a disposable syringe linked to the console by a flexible air line. The convenient"teach" function makes it easy to determine ... morethe correct amount of adhesive to apply and compensate for changes in adhesive viscosity. Once the size of the first deposit is determined, the operator simply positions the dispense tip and presses an electric foot pedal to put an identical amount of adhesive on the next part. Input Voltage: 100/120/220 VAC. 50/60 Hz, 14/12VA Internal Voltage: 24 VDC Cycle Rate: 600/minute Air Input: 80 to 100 psi(5.5 to 6.9 bar) Air Output: 0 to 100 psi(0 to 6.9 bar) This unit has been tested to power on. A foot pedal is NOT included. A standard power cable is included. And the unit comes with a 30 day warranty. Owner's Manual(for informational purposes only) Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if
|
|
|
BT# 16641 M06C1-090.1Y You are looking for: SUREBONDER PRO9000A INDUSTRIAL GLUEGUN 120VAC 200W. USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: SUREBONDER. Additional info: INDUSTRIAL GLUE GUN. Model: PRO9000A 120 VAC 200 Watts Glue gun can dispense up to 7 pounds of glue sticks per hour Has some glue on the gun Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
BT# 16642 M06C1-090.1Y You are looking for: SUREBONDER PRO9000A INDUSTRIAL GLUE GUN 200W 120VAC. USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: SUREBONDER. Additional info: INDUSTRIAL GLUE GUN. Model: PRO9000A 120 VAC 200 Watts Glue gun can dispense up to 7 pounds of glue sticks per hour Has some glue on the gun Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
BT# 16643 M02A6-075.1Y You are looking for: SEW EURODRIVE EF030-503 EMV-MODUL FILTER FOR MOVITRAC 31C INVERTER 3X230V-500V. USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: SEW EURODRIVE. Additional info: EMV-MODUL FILTER FOR MOVITRAC 31C INVERTER. Model: EF030-503 U N =3x230V. 500V I N = 10A(400 V) Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
Here is a TRIDAK 450 Adhesive Dispenser Controller in good physical condition. Unit powers on and is responsive. Guaranteed against DOA. Please feel free to email or call with any questions. The ask a question link is on the left towards the bottom. Able Supply LLC Madison WI 53718(608) 669-3680 Thank you for looking. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1418b73a22a-0x102-
|
|
CPO Condition: Reconditioned. Model 2641-80. List Price: $239.99, CPO Price: $166.99, You save: $73(30% Availability: In Stock, Shipping: FREE Shipping Like New. For Less Save an average of 25-30% vs. new. Without sacrificing quality. CPO is the top retailer of reconditioned tools and home improvement products. With a wide selection of thousands of manufacturer tested and certified items that are backed by a full warranty. Big Savings, Like-new Performance, 60-Day Money Back Guarantee, Some items may show slight usage. But are guaranteed to work like new! PHOTO IS REPRESENTATIVE of the model and condition you will receive. 950 lbs. of dispensing force for the highest viscosity materials, Variable speed trigger allows for maximum control of flow rate and bead width, Constant Flow technology ... moreresults in steady material flow rate and even beads at all viscosity levels, Anti-drip mechanism instantly stops material from expelling upon trigger release, Rotating quick-change collar accepts all Milwaukee quick change configurations- 10 oz. carriages. Quart size carriages, and 20 oz. sausage style barrels, Six setting maximum speed dial optimizes flow rate from 0 to 21-in per minute based on application, Cordless, Yes, Coverage, 21-in/ min, Carriage, 10 oz. Weight, 4.8 lbs. Voltage, 18V, Series, M18, Battery Type, Li-Ion, 18V Cordless M18 Lithium-Ion Caulk/Adhesive Gun with 10 oz. Carriage(Bare Tool) 2641-80, 10 oz. Plunger Rod, Piston Assembly, Bare Tool- Batteries and Charger Sold Separately, 1 Year Limited, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/convert
|
|
|
Nordson Series HM IX Hot Glue Unit-Serial Number AA92861708-Electrical 220/440 Volt. 1/3 Ph, 50/60 Hz-7896 Watts Max. 32.9 Amps Max. Overall Dimensions 36” L x 14” W x 21” H@ approximately 50 lbs. Condition: Used as is-This unit came off a running machine and has been in dry storage for a few years-Only includes what is shown in pictures. No hoses or guns included. No charge for securing to a pallet for shipping-Buyer is responsible for shipping cost and arrangements-No charge for loading during normal business hours-Shipping from Morris Connecticut 06763-Payment by Paypal. Bank Check or Cash only-Payment due within 5 days of auction end
|
|
|
Nordson gear pump bracket or housing with drive shaft Part for VL500 melter Used Buyer pays shipping Accept Paypal
|
|
THIS LISTING IS FOR AN EFD VALVE DISPENSE CONTROLLER MODEL: 7000 Input Voltage: Selectable 100/120/220 VAC 50/60 Hz 10/9VA Internal Voltage:12 VDC Feedback Circuits:5 to 24 VDC NC solid-state switch 250mA maximum Initiate Circuit:5 to 24 VDC signal or foot pedal Air Input:70 psi(4.8 bar) Air Consumption:Approximately 1.5 SCFM at 400 cycles per minute Cycle Rate:Exceeds 600 per minute Time Range:Programmable 0.001 to 9.999. Or 00.01 to 99.99 seconds ITEM WAS IN GOOD USED WORKING CONDITION WHEN REMOVED We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or ... moreif you would like to pick up this item and save shipping please let us know. We will ship to locations other than the continental US. Please contact me for a shipping quote. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED IN OUR STORE.
|
|
|
Nordson motor drive control Pt. 273611A Used. Good functional condition Buyer pays shipping Accept Paypal
|
|
|
Nordson Signal Encoder Cable 10' Long
|
|
|
Nordson Signal Encoder Cable 7' Long
|
|
|
Up for auction is a JDSU EFD 1000XL-15 Fluid Dispenser with Extra's AS-IS. This unit cannot has been power tested and turned on. However, no further testing has been done, as such this unit is being sold AS-IS for parts or repair only. Cosmetically this unit is in fair condition with heavy signs of prior use; the unit you see pictured is the exact unit you will receive. You will receive ONLY what is shown in the pictures provided. Nothing else is included, if you have questions about what you will receive contact us BEFORE making an Offer or Buying.
|
|
|
C10810. OK Industries Model OK9150 Adhesive Dispenser Module- No Accessories- Powers up as shown- No other testing done. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges,
|
|
|
PAM adhesive sprayer HOT MELT complete SUPPLY system EXCELLENT Up for auction is a high end adhesive sprayer by PAM. Model: 600 SPRAYMATIC EXCELLENT CONDITION. Pulled from a working environment. Very low usage. Auction includes what can be seen. For more info. on this unit see this website: Low starting bid and no reserve. Thank you. ALL COMMUNICATION MUST ORIGINATE AT THE EBAY SITE. Alaska. Hawaii, U.S. Territories( Guam, Puerto Rico, Virgin islands, Etc) APO’s and FPO’s will cost more. INTERNATIONAL SHIPPING IS AVAILABLE. BUT SHIPPING FEE MAY BE SUBSTANTIALLY MORE. I strive to describe the merchandise as honestly and completely as I can. I also strive for all 5 stars on my DSR. Please contact me if you plan on leaving anything other than a perfect score. Thank you.
|
|
|
Hilti MD2000 epoxy gun. Robust dispenser suitable for hard job site conditions. No post flow dripping after pressure release: clean job and no waste. Injection of 330 ml HIT foil packs for rebar and anchoring application. This auction includes the gun without box or cartridges. There are some scratches and product residue. In great used condition. Posted with
|
|
EFD. Inc. 1100D Semi-Automatic Fluid Dispenser, Foot Pedal& Accessories Features are as follows: Quick-Connect Air Hose· Foot Pedal· Air Tube with syringe connector· Input Power: 120V. 1 Phase, 60 Hz· Dimensions: 3" L x 4.5" W x 2.5" H Mechanical condition: Being sold as is. No refunds or exchanges. Used– limited testing. Plugged unit into wall. All motors/fans sound operational. No broken or missing function buttons. No temperature. Air or timing test Cosmetic condition: unit is used& does show signs of normal use– see photos for details Please note: if you require shipping services other than stated or you wish to use your own UPS account( preferred! please request prior to payment/shipping. Continental US shipping: UPS ground plus $5.95 packaging/handling- ... moreincludes insurance for purchase price if UPS is used. Tracking on every purchase. Other shipping methods may be arranged. Please request prior to purchase. Canada: See rates below if available or inquire. Other than Canada. UPS or federal express(your account) Questions– please contact us prior to placing and offer/purchase and specify the item number please. Payment: Payment must be received prior to removal&or shipping. Texas residents add 8.25% unless TX Resale or Usage Certificate remitted with payment. We accept PayPal& other forms of payment; please see selections below. Check out my! Be sure to add me to your! Please visit our ebay store for more great items. We specialize in Printed Circuit Board Assembly(Electronics Manufacturing) Equipment. Semiconductor, Wire& Cable Processing, Business& Industrial Auctions; Appraisal, Project Valuation& more. Thanks for visiting! Remember Buying used&or refurbished equipment is eco-friendly and helps preserve our non-renewable resources. Internal no. 13980
|
|
Kahnetics KDS 808 Shot Meter/ Fluid Dispenser. Foot Pedal Controller& Accessories Features are as follows: Foot Pedal· Air Tubing w/syringe attachment· Quick-Connect Air Hose· Includes EFD 5113CP-8 55cc Disposable Reservoir System· Input Power: 120V. 1 Phase, 50/60 Hz· Dimensions: 5" L x 5" W x 9" H. Approx. 5 lbs(actual weight) Mechanical condition: Being sold as is. No refunds or exchanges. Used– limited testing. Plugged unit into wall. All motors/fans sound operational. No broken or missing function buttons. No temperature. Air or timing testing. Cosmetic condition: unit is used& does show signs of normal use– see photos for details Please note: if you require shipping services other than stated or you wish to use your own UPS account( preferred! ... moreplease request prior to payment/shipping. Continental US shipping: UPS ground or USPS plus $5.95 packaging/handling- includes insurance for purchase price if UPS is used. Tracking on every purchase. Other shipping methods may be arranged. Please request prior to purchase. Canada: See rates below if available or inquire. Other than Canada. UPS or federal express(your account) Questions– please contact us prior to placing and offer/purchase and specify the item number please. Payment: Payment must be received prior to removal&or shipping. Texas residents add 8.25% unless TX Resale or Usage Certificate remitted with payment. We accept PayPal& other forms of payment; please see selections below. Check out my! Be sure to add me to your! Please visit our ebay store for more great items. We specialize in Printed Circuit Board Assembly(Electronics Manufacturing) Equipment. Semiconductor, Wire& Cable Processing, Business& Industrial Auctions; Appraisal, Project Valuation& more. Thanks for visiting! Remember Buying used&or refurbished equipment is eco-friendly and helps preserve our non-renewable resources. Internal no. 13983
|
|
|
Automatic Adhesive Dispenser/ Dispensor Syringe Machine Removed form working machine. Ship from Thailand to Worldwide 299 $ by register small packet-air 14-21 working days Payment by PayPal Thank you.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14386ff977b-0xdb-
|
|
|
MIXPAC DMA 50 ADHESIVE DISPENSER. DISPENSER SYSTEM FOR 2 PART ADHESIVE MIXES. USED IN SILICONE ADHESIVE DISPENSING- EXCELLENT CONDITION.
|
|
Lightly used Nordson Hot Glue Hose- Length is 16 ft. Material 274796D. Rated for 1.500 PSI, 240 VAC, and 435 watts You are buying the exact item shown. All my items are guaranteed as described. Not to be DOA, and functional as intended for a period of 30 days. Please carefully review the Item Title. The description, and the detail in the photographs and make sure this is the correct one for your application. Payment is by PayPal only. Please pay within 4 or 5 days of purchase or successful bid closing. Shipping is by USPS. I ship within 2 days of payment receipt into my paypal account. And only to PayPal confirmed addresses unless directed otherwise. I do NOT mark up shipping and never charge you for packing, crates, boxes, etc. Thanks for checking out my item. I have sold with perfect feedback ... moreand exceptional customer service on EBAY since 1999. Please contact me with problems and give me a chance to resolve any issues that may occur with your shipment or merchandise. 122609 On Jun-26-13 at 10:44:21 PDT. Seller added the following information:
|
|
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ DEVILBLISS QMG 10 GALLON GALVANIZED PRESSURE POT A very clean pot that has had one owner and only one user. Good seal with newer gauges. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of coverage 3. Please call(630-229-6705) or email( info@360degreemachinery.com) us for full freight options. There will be an additional $25 crating charge on this item if shipped common carrier to protect against theft and damage. 4. Illinois ... moretransactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10.000 to protect against freight loss/damage
|
|
NORDSON Electron Fusion Devices EFD 1000XL Fluid Liquid Epoxy Adhesive Dispenser Electron Fusion Devices EFD 1000XL Fluid Liquid Epoxy Adhesive Dispenser Module Lights up when power applied. Input voltage: 100/120/220 VAC. 50/60 Hz, 16/13 VA. Internal voltage: 24 VDC. Foot-pedal voltage: 9 VDC. Air input: 80 to 100 psi(5.5 to 6.9 bar) Air output: 0 to 100 psi(0 to 6.9 bar) Cycle rate: 600/minute. Time repeat: ±0.1% This unit has been tested to power on. A foot pedal is NOT included. A printed manual is included with this item. Click the link at the bottom of the listing to see all of the tech specs at the manufactures website. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. We care enough to take multiple pictures of our items ... morefor sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. CMB_gsrx_vers_526(GS 6.6.6(526)
|
|
|
NORDSON EFD 2000XL Model Valvemate Dispense Controller Electron Fusion Devices Specs are available by clicking link on bottom of page. Printed manual also will be shipped with unit. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. CMB_gsrx_vers_526(GS 6.6.6(526)
|
|
|
Used in fine working condition. Posted with
|
|
|
140728 Used. Nordson SA10M Glue Block, M10-1.0 thread, Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 140728 Location: GRG-R02-P015-S03-A-0001575
|
|
Ivek 520117-A01ZAC Multispense 2000 Pump Controller 100/120/220/240VAC From our inventory. We are selling an Ivek Multispense 2000 Pump Controller. Specifications: Model# 520117-A01ZAC More Information: 100/120/220/240VAC The Multispense 2000 series uses a multi-channel controller that drives a patented linear actuator module connected to a ceramic pump module providing linear flow control. The controller is designed with Eurocard(modular) circuit boards. ST53-2 26 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower ... morequality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 26 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple
|
|
JOHNSTONE JPC1001-S1-8-HDE 55 GALLON DRUM DISPENSE PUMP#16 Make: Johnstone. Model/ Part# 1: JPC-1001(JPC1001) Model/ Part# 2: 1001-S1-8-HDE. Description: Air-Operated(Pneumatic) 55 Gallon Drum Unloading Pump; Unit is configured exactly as pictured. Includes all/only items pictured. Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. ... moreYou will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have[5] days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! Payment We accept the following forms of payment. PayPal. Sales Tax For shipments to Arizona addresses. We are required by State law to collect 7.8% Sales Tax. Shipping All items under 100 lbs will be shipped either USPS or Fedex. Any items over 100 lbs will be shipped freight through a freight carrier of our choice. Customer Service If you have any questions before or after your purchase please use the ask a question button. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-143c895ef99-0xf4-
|
|
|
For Sale: Cox 50ml Epoxy Adhesive Dispenser Gun. Condition: Like new. Used once. Ship to lower 48 states Paypal only
|
|
|
This kit i bought new a few yrs ago as you can see in photos it could use some clean up some caulk residue is on the side it is a used tool and is sold as you see it needing some clean up works very well battery is newer as i had to replace the old one this one has about 4 charges on it shipping is lower 48 contact for other 4t1015
|
|
|
This auction is for 10 sealant guns as seen in the picture. the tool may have some marks and or dried sealant. it is used(the new ones are over $100) The tool has a 4 foot hose with a standard end. sorry I don't have the tube long or short but am working to fab some. I have several of these and would be glad to do volume discounts. tell your buddies or buy him one for the tool you broke. This is a great price and wont last long. If you have any questions give me a shout. thanks for looking and check out my other auctions for aircraft related tools and manuals.
|
|
|
Lot Pneumatic Press ADF Generic Adhesive Dispenser Clippard Barber-Colman Motor 22” tall. Nice Pneumatic press. Pneumatic cylinder moves up and down. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with Fedex ground to lower 48 USA. AK. HI, PR to pay actual shipping. International to pay actual shipping. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. zmw3-r4-s1_gsrx_vers_526(GS 6.6.6(526)
|
|
|
LOCTITE Henkel Glue Adhesive DISPENSE SYSTEM 97106 90FE091 Dispenser Pot Made in Germany. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with Fedex Ground to lower 48 USA. AK. HI, PR to pay actual shipping. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. zmw3_gsrx_vers_526(GS 6.6.6(526)
|
|
|
This is in good condition however it is missing the left side round Aluminum pushing part. Sold as is.
|
|
|
Epcon Epoxy anchoring E101 injector tool. Used and has signs of use but in good working condition.
|
|
ASTRO PACKAGING 2-15 HOT MELT GLUE ADHESIVE MACHINE Make: Astro, Model/ Part# D2-15, Volts: 120, Amps: 20, RPM: 86, HZ: 50/60, Phase: 1, Gun Head Model/ Part# AD31/ 18381HI, Volts: 120, Includes all/only items pictured. Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning ... morebidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have[5] days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! Payment We accept the following forms of payment. PayPal. Sales Tax For shipments to Arizona addresses. We are required by State law to collect 7.8% Sales Tax. Shipping All items under 100 lbs will be shipped either USPS or Fedex. Any items over 100 lbs will be shipped freight through a freight carrier of our choice. Customer Service If you have any questions before or after your purchase please use the ask a question button.
|
|
|
Simpson expoxy tie tool. one has a broken corner but has been repaired with epoxy and holding strong. See pic. 3 avalable. auction is for one dispenser but 3 are avalable.
|
|
Clean Musashi Engineering MS-10D Precision Pneumatic Fluid Dispenser with Hand Switch Details: Manufacturer: Musashi Engineering. Inc. Model: MS-10D Includes hand switch. As pictured Condition: Good cosmetic condition with some signs of previous use. See photos for more detail) Tested: This unit was removed from a working environment. But I do not have the resources to fully test it. Tested for power on only. Warranty: 14-Day Right-of-Return_ Terms and Conditions Only the items pictured will be included. If it is not pictured or mentioned in the description it is not included. If you have any questions. Please contact us before bidding or buying. Payments: Payment must be received within three(3) days of the date of purchase. We currently only accept PayPal. If you are having trouble completing ... moreyour purchase. Please feel free to contact us. All California buyers wil be charged 8.375% sales tax. Shipping: Buyer is responsible for all shipping costs. Including return shipping in the event of a return. All items will be securely packed and shipped with the buyers requested method. If you would like to add shipping insurance, please conact us for rates, and coverages. Warranty*Please see listing above for the warranty that applies to this item. As-Is. No Returns: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been altered or damaged. We maintain the right to use our descretion when choosing between a replacement or refund. Returns: NOTE: Original shipping charges are Non-Refundable Defective/DOA: We accept returns for
|
|
ITEM DESCRIPTION 1 USED NORDSON C538184 0210L3 NOZZLE. SEE PHOTOS! Q6-6*IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. Items include ONLY what you see in the photo. If you need an accessory that is not pictured-ASK! PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any INTERNATIONAL ... moreOVERNIGHT SHISPMENTS PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selection of h
|
|
|
LEADER industrial glue gun. 125 Watts. 400 degrees. Works fine. Comes as pictured.
|
|
Model: 223838C Length: 20 feet Volts: 240 VAC Watts: 572 CLICK HERE to see more information on this item Payment: PAYPAL Preferred. Payment is expected within 5 business days of accepted bid. M/C. Visa, AmEx, Discover Accepted Thru PAYPAL. WARRANTY: Not DEAD ON ARRIVAL. You may return this item within 14 days from the day you receive shipment only if unit is"D.O.A. or"Not As Advertised" on this page. Buyer pays return shipping costs. Items must be returned in the same condition as received. If item was"NEW IN BOX" Original packaging must be returned with purchase. All items are marked for identification to prevent fraudulent returns. Returns due to ordering the wrong item are subject to a 20% restock fee. NO WARRANTY from the manufacturer is implied. By purchasing ... moreyou agree that you understand this. If you have not contacted us within 14 days we will assume you are satisfied. POLICY: We accept no responsibility on the correct application or installation of this item. This item is to be installed and maintained by qualified individuals. By purchasing this item you agree to hold GEARHEAD ENGINEERING only liable for the purchase amount. FEEDBACK: Once your item arrives in satisfactory condition. Please leave feedback for us and we will do the same for you. Ebay will ask you to rate us on 4 different performance criteria with a rating of 1 to 5 stars. This“FEEDBACK” process is a powerful and important tool to provide Ebay with a satisfaction grade for sellers. We want to earn your Five Star Rating. If you feel we don't deserve a 5 star rating. Please contact us before leaving feedback. We will work to solve any problems or concerns you may have. Our goal is your satisfaction and we'll work hard to earn it. eBay Seller ID: gearheadeng INTERNATIONAL CUSTOMERS: ALL PAYMENTS MUST BE MADE THROUGH PAYPAL. NO EXCEPTIONS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country'
|
|
Nordson 115580A Cable Item Condition: Used Quantity: 2 unit Cosmetic Condition: 8 Functionality: Remarks: Actual Weight: 1.4Kg Dimension: 5x33x37- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140103-WLM. PB4446-2(2) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ON EACH SALE WARRANTY: ... moreAll NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item shipped to South America via DHL, please send us email after paying for the item, oth
|
|
|
Nordson Adhesive System Model: PA-2510 Unit No: 306945A Volts: 230 H: 250/60 Amp: 30 Watts(Max) 5900 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144712694ab-0x106-
|
|
|
Comes with all five modules. Note that one is already installed. Heats up. I have another one listed. This is the better cosmetic condition, so the price is higher.
|
|
HILTI HIT-CB 500 Caulking Manual Dispenser w/t New Epoxy Adhesive HIT-RE 500-SD Used In Good Working Condition Ready To Ship- Free Shipping Items are shipped out within 1-3 business days. Monday through Friday. Tracking information will be emailed to you once the item has shipped. Most items are shipped via USPS Or UPS. Shipping speed varies by location and the speed of the postal service. Items shipped via USPS can take up to 10 business days. And rarely can take longer. Please be patient and I assure you that all items are shipped out promptly. Paypal is the only method of payment accepted. Payment is expected within 5 days. All non paying bidders will reported to ebay. By bidding on an item you're entering into a legally binding contract to complete the purchase. Feedback and Detailed ... moreSeller Ratings: Positive feeback and DSR ratings are extremely important to me. I would appreciate positive feedback and 5 star ratings from all of my buyers. My number one goal is customer satisfaction. If you have any problems. Questions, or concerns about the merchandise that you purchased please contact me before leaving negative or neutral feedback.
|
|
|
NORDSON SERIES 6000 HOT GLUE APPLICATOR MACHINE PART#125385A. We have a used. Nordson Series 6000 Hot Glue Applicator Machine Part#125385A. It came out of a research lab that has been closed. The item powers up, heats, and melts the glue. The hose also heats up as well. That was all the testing we were able to perform. Additional information can be obtained from: PICK-UP ONLY on this auction. ITEM can be sent freight but is the responsibility of the buyer to arrange. Pl ease check our feedback and bid with confidence. Please check out our other auctions as well. Including other parts, accessories, and machinery.
|
|
Nice 3M Scotch-Weld PUR Hot Melt EZ Adhesive Applicator Glue Gun Air/Electric Selling With No Reserve! Hi! I have for Auction here a good hardly used 3M Scotch-Weld 62-9845-99308 PUR Easy Adhesive Applicator. Hot Melt Glue Gun. This gun has not been used very much. It uses caulk like tubes that you buy to put in here then it heats up the whole tube and pushes it out with air pressure. There is a dried up tube inside the gun so you know what to buy. Nice Tool! See Pictures. Get yourself a great deal here. NOTE: I add a $1.50 on all my Priority Mail& $2.00 on regular packages for handling and supplies plus the 9% that eBay charges me on shipping(which is already included in the shipping) I have people leaving low DSR's on shipping cost's and I really need you to decide that it is ... moreokay to pay the shipping that I have on here before you bid or don't bid on my items. Low DSR's cost me a lot as it won't bring me up in search results as quick and I also loose a 20% discount off my eBay fees. I'm selling on eBay to make a living for me& my family and I can't do the shipping for nothing. I realize that shipping prices just went up again with shipping companies but it can't be taken out on the sellers. Thanks for understanding Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always
|
|
Harbil Paint Colorant Dispenser. Model 12SC 80232. Harbil Paint Colorant Dispenser. Model 12SC 80232. This paint dispenser has been used but does work. The cylinders have been cleaned but there is some paint on some parts. It has 11 cylinders and 12 motors. It is missing 1 cylinder. You may want to rinse it before using. It will be taken apart to ship- You are also welcome to come pick it up. Please scroll up and look at all of the pictures in the listing. The pictures are detailed and help to describe the item. Email me with any questions. Thank you. Please make all payments within 5 days of ending of auction. All items will be shipped within 5 business days of cleared payment. Please ask questions before the item is sold. I offer many different items through Ebay. That I have bought at local ... moreyard sales, auction or flea markets. I do my best to check them out and describe them. If I make a mistake please let me know so that we can work it out. If it is my fault I will correct it, please remember I am not an expert on the items that I sell so please view the pictures and read the descriptions completely, Thanks Farm2000 Please contact me with any questions are concerns about any item that I have listed or sold. I will email you back. Farm2000
|
|
|
Nordson Hot Shot Manual Adhesive Applicator w/ Hose& Gun Works Great!
|
|
|
CountryGoldandPawn You are bidding on(1) Sears Craftsman Hot melt Gun#980523! No returns! SOLD AS IS! No glue sticks included. What you see in the photos is what you will get. Review all pictures and ask questions before bidding. Payment is expected within 24hours of purchase if that is a problem please contact us and make payment arrangements. If no response we will open an unpaid items case against you and relist the item. This could effect your buying and selling privileges on eBay. WE WANT ALL OF OUR CUSTOMERS TO BE SATISFIED. PLEASE CONTACT US iBEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK. WE WANT YOU tO BE SATISFIED. THANKS TO ALL OUR BIDDERS& BUYERS! Posted with
|
|
Click to Enlarge) Product ID# C107545 This EFD 1500XL Fluid/Epoxy Dispenser with Foot Switch looks to be in good cosmetic condition. Showing some minor signs of wear. It powers up, and the digital display is bright and clear, and it clicks and counts to the set point when the foot pedal is pressed. However, this is the extent of my testing of it, and it is being sold as-is. It will include a power cord and foot switch, but no other accessories are included. Approximate overall unpacked dimensions: 11"L x 9"W x 5"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below ... moreShipping. Buyer pays a fixed shipping and handling fee of 17 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 7 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out
|
|
Nordson 1068941B RTD Nickel Item Condition: Used Quantity: 1 unit Cosmetic Condition: 8 Functionality: Remarks: Actual Weight: 0.2Kg Dimension: 2x20x22- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140103-WLM. PB4466-10(1) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ON EACH SALE WARRANTY: ... moreAll NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item shipped to South America via DHL, please send us email after paying for the it
|
|
Nordson H201.ZTF 810075A 220/240V 260W Item Condition: USED Quantity: 2 unit Cosmetic Condition: Functionality: Remarks: Actual Weight: 1.4Kg Dimension: 5x17x16- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140103-WLM. PB4482-11(2) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ON EACH ... moreSALE WARRANTY: All NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item shipped to South America via DHL, please send us email after paying f
|
|
FOR SALE] Hilti HDE-500-A18 Li-Ion 18 Volt Cordless Adhesive Dispenser. Battery& Charger This unit has had little use with few scuffs but the cartridge holder pin has been cut off. This was done so that it is easier to load and un-load cartridges. Please view picture 10 to see this removed pin. This does not effect the units operation it only makes it easier to use. Unit is in great working order guaranteed to work on arrival. Comes with one battery. Hilti 4/36-90 charger and empty cartridge as picture only, no other accessories included. View are detailed images for more info. Click on the link below for PDF manual/ user guide. PDFOperating instructions HDE 500- A18(EN-US) 2.3 MB- Hilti 13764. We have the BEST RETURN POLICY of any seller on Ebay. We will provide a return label for any ... moreitem that qualifies for a return Items that you change your mind about or are not sold for parts or repair. Or are sold with no returns per our ebay terms and conditions DO NOT QUALIFY FOR A RETURN LABEL. We love our customers and want you to have a good buying experience. So please contact us and let us respond first if you have any issues. OUR NUMBERS ARE(435)674-9100 or(435)656-8500 We will return your call if you leave a voicemail. We do allow a 14 day return window on items that are listed with a return policy. Please allow 48 hours or a response for an item that qualifies for a return. We do not answer emails on the weekends so please allow us till Monday to respond to any return issues. Items listed for parts or repair non-working and do not function as intended and are not fully operational cannot be returned for any reason! AS-IS items marked with no returns or parts or repair cannot be returned. Items that are returned because you do not want them or ordered the wrong item will incur a 15% restocking fee.LTL FREIGHT ITEMS DO NOT QUALIFY FOR RETURNS. NO SHIPPING COSTS WILL BE REFUNDED ON THESE ITEMS. BUYER IS FULLY RESPONSIBLE FOR RETURNS AND ALL COST ON LTL FREIGHT ITEMS. Items must be returned in the original
|
|
Nordson 753462A Cable Item Condition: Used Quantity: 1 unit Cosmetic Condition: 8 Functionality: Remarks: Actual Weight: 2Kg Dimension: 5x35x36- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140103-WLM. PB4464-6(1) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ON EACH SALE WARRANTY: All ... moreNIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item shipped to South America via DHL, please send us email after paying for the item, other
|
|
STORE ADD TO FAVORITE SELLERS FEEDBACK CONTACT 3M Scotch-Weld Hot Melt Applicator TC w/Quadrack Converter& Palm Trigger 9990, COSMETIC CONDITION, VERY GOOD CONDITION. FUNCTIONALITY, TESTED. WORKING CONDITION. WARRANTY, All our items have a 14 days money-back guarantee unless specified otherwise in the item description. If you have a problem with your order. Please contact us within 14 days of delivery. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE, EMAIL US BEFORE LEAVING A NEGATIVE FEEDBACK! WE CAN SOLVE ANY PROBLEM! 100% SATISFACTION! PRODUCT INFO, Items Included: Gun, Manual, Original Box, Item ID: A2064 Feel free to contact us if you have any questions. CONTACT INFORMATION, Our number one priority is your satisfaction from purchase to delivery. If you have any ... morequestions or concerns please feel free to message us via eBay message system. We are open Monday- Friday 9am-5pm CST, PAYMENTS, PayPal is our only accepted form of payment(PayPal allows to pay by credit cards through their system) For shipments to Illinois addresses. We are required by State law to collect 6.25% Sales Tax. We reserve rights to refuse any non-confirmed address payments. Payment must be received within 3 days of auction closing. Including weekends and holidays, otherwise our software will automatically file an Unpaid Item Dispute. SHIPPING, All orders are shipped the same or the next business day the payment is cleared. We ship to the USA lower 48 states ONLY. Also we use Global Shipping Program to ship international. Please check if your country in the list of this program. Powered by
|
|
|
Item removed from working environment comes mounted on rolling cart with transformer. Call for additional details. 765-661-1563 Posted with
|
|
|
up for bid are 3 Hilti MD2000 and 1 MD2500 epoxy guns. All work. one of the MD2000 is missing the black thing that holds the tube. Sold as is with no returns
|
|
|
Black and Decker cordless caulk gun Model CG100:
|
|
Pulled from decommissioned/ working machine. Please see picture with name plate for specifications Non Canadian and non USA buyers please email me for shipping cost* Item is guaranteed not to be DOA. For replacement or refund within 14 days of receiving. Item is sold as pictured(money refunded, less shipping) Payment details: Paypal payments only thanks. You must contact me in 3 days and pay in 7 days or the item will be re-listed Please. Do not pay until we email you an invoice unless you live in Canada or USA in which case you can pay right away. Canadian customers must pay Canadian Taxes Shipping details: QUOTED shipping and handling in Continental USA and CANADA. Buyer is responsible for duties. Customs brokerage and taxes. International buyers please email me for shipping cost We will ... moreNOT ship on your courier account number( no exceptions) Unit can be picked up if desired for $5 USD. LANG- LOCATION V1/V2
|
|
OUR PROMISE: We are committed to accurate listing descriptions. Fair surplus pricing, reasonable shipping options and professional packaging. DESCRIPTION: EFD FLUID LIQUID DISPENSER 1000 V-100 Model# 1000 V-100 Condition: Used surplus in good cosmetic condition with only light signs of wear. Detailed description: This item powers on but we have not done any further function testing. There sticker residue and some fluid stains on this unit. More Info on the Web: N/A Please be aware. This listing does not include any power cables, software or manuals except for what is depicted in the photos or explicitly stated in the description. Warranty& Returns Policy PLEASE READ: Business Hours: Monday- Friday. 8:00am to 4:30pm PST. Payment must clear prior to 2:00pm PST to ship the same day. Please ... morepay within 3 days of receiving your invoice. Please review our Store Policies. Fed Ex is our standard carrier for all domestic shipments to the 48 contiguous states. USPS Priority is our standard carrier for all other destinations. We are happy to negotiate other shipping options at the buyer's request. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Please review our Shipping& Handling for more details regarding shipping options including freight shipments. Have a question? Please view our FAQ page or contact us! Why not click here and subscribe to our bi-weekly newsletter? For lots more items visit our eBay storefront at Burchams Surplus. Powered by SixBit's eCommerce Solution
|
|
|
Very nice used 3M POLYGUN EC Glue Gun. Electronic Control, 5.5lb/hr, 120V. Comes as pictured. Shipping will be $9 in the lower 48 states. Please email with questions.
|
|
|
dual caulking and adhesive gun great shape only used on 1 job works great thanks for looking and good luck bidding
|
|
|
Hi. Here's a model 125 Newborn caulking, adhesive, glue gun in great shape for being used. Works like new. Has spout cutter too. Thanks for Looking* Ship US Only
|
|
|
YOU ARE Looking at A 3M Scotch-Weld easy 250 polyurthane reactive pur Adhesive Applicator gun(62-9845 has air hose and electric cord and plug. Gun is clean and in like new condition yet look at pictures shiping shown on e bays calculator any other questions let me know 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-144da90a780-0x110-
|
|
Click to Enlarge) Product ID# C107661 This EFD 1500XL Fluid/Epoxy Dispenser with Foot Switch looks to be in good cosmetic condition. Showing some minor signs of wear. One of the plastic side panels is a little banged up(please see photos above for detail) It powers up, and the digital display is bright and clear, and it clicks and counts to the set point when the foot pedal is pressed. However, this is the extent of my testing of it, and it is being sold as-is. It will include a power cord and foot switch, but no other accessories are included. Approximate overall unpacked dimensions: 11"L x 8"W x 5"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless ... moreotherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 17 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 7 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations wit
|
|
|
The gun alone is going for around $60 new. The mixers are expensive as well. There are 11 mixers. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144e0dcac69-0x10b-
|
|
Nordson 460246 Valve Item Condition: Used Quantity: 2 unit Cosmetic Condition: 8 Functionality: Remarks: Actual Weight: 0.2Kg Dimension: 5x2x7- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140210-RLN. PB4533-16(2) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ON EACH SALE WARRANTY: All ... moreNIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item shipped to South America via DHL, please send us email after paying for the item, other
|
|
|
MIXPAC ADHESIVE DISPENSER PL050-02; 2:1. DISPENSER SYSTEM FOR 2 PART ADHESIVE MIXES. USED IN SILICONE ADHESIVE DISPENSING- EXCELLENT CONDITION. SHADOW OF NAME WRITTEN ON IN SHARPIE ON TOP VIEW.
|
|
|
Kit has 2 spare rods. Good battery, charger. Complete kit. May have been lightly used, but works perfectly. Check photos, what you see is what you get. Posted with
|
|
|
Good working condition silicon dispencer Include machine. Pedal and power cable only! Posted with
|
|
|
Butyl extruder bez- double sided coating of rectangular and shaped spacer frames- automatic nozzle head adjustment- infinite height adjustment. Excellent shape. It is hooked up and working. Serious inquires send me a message and we can give you more information about it.
|
|
I am selling a WellMade Tools AG400 Pneumatic Caulk Epoxy Gun Dual Component Applicator. It was only used for a couple of small projects and is now up for sale. Its in very good condition and is ruggedly built and should last a long time if treated properly. The retail price of these is $499.00 and you can buy it on Amazon for $400.00 and several other stores sell them also like Sears and several online tool suppliers. I am selling this one CHEAP! Here are the specs- Air in" and"Air out" features enable power forward and power reverse for ease of operation Supplied with built in air regulator at base of handle for added stability Thrusting Force 1500 lb Max Air pressure: 100psi Item Weight, 11.4 pounds, Product Dimensions, 22 x 9.2 x 6.5 inches, Item model number, AG-400, PLEASE- ... moreNO International bidders. I will only ship to the lower 48 states! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144f15ff7a7-0x105-
|
|
|