|
|
Order by: |
0 bids Free Shipping
Condition: New Location: , China
This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039. gives more power to STIHL 029,M 90 MS310. The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved.
0 bids Free Shipping
Condition: New Location: 金东区, China
This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039. gives more power to STIHL 029,M 90 MS310. Cylinder 1.
0 bids $40.00 Shipping
Condition: New Location: 金东区, China
This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039. Cylinder 1. gives more power to STIHL 029,M 90 MS310.
0 bids Free Shipping
Condition: New Location: 金东区, China
The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved. Material: Alloy. Cylinder 1.
0 bids $550.00 Shipping
Condition: Used Location: Staten Island, United States
A 25hp electronic fuel-injected (EFI) engine, digging depth capacity of 48” (121.9 cm), maximum digging width of 8” (20.3 cm) and a slender profile give this machine the power to get the job done with the ability to access the tightest of spaces.
0 bids Free Shipping
Condition: New Location: Scottsdale, United States
All Quick Snap tools are designed to magnetically attach to our Universal Holder, which allows you to switch between Quick Snap tools without removing the holder. Holds carpenter pencils, grease pencils, pens and markers.
0 bids $550.00 Shipping
Condition: Used Location: Staten Island, United States
A 25hp electronic fuel-injected (EFI) engine, digging depth capacity of 48” (121.9 cm), maximum digging width of 8” (20.3 cm) and a slender profile give this machine the power to get the job done with the ability to access the tightest of spaces.
Buy It Now
Free Shipping
Condition: New Location: , United States
All Quick Snap tools are designed to magnetically attach to our Universal Holder, which allows you to switch between Quick Snap tools without removing the holder. Holds carpenter pencils, grease pencils, pens and markers.
0 bids Free Shipping
Condition: Used Location: Waianae, United States
It's easy to operate, making it possible for just one person to handle the job. Used by walking the machine backwards, leaving soil neatly stacked on the side of the trench.
0 bids Free Shipping
Condition: Used Location: Austell, United States
2006 Vermeer LM42 Walk Beside Trencher Vibratory Cable Plow in great working condition.Machine starts right up.The joy stick is off but doesn’t affect the operation of machine.Does not have bore attachment.2006 Vermeer LM42 trencher cable plow696 hours on meterDeutz diesel engine41 HPVermeer VP4 vibratory plow16" plow depthVermeer LD6 trencher48" dig depth26x12.00-12 tires3,335 lbs. base operating weight
Buy It Now
Free Shipping
Condition: Used Location: Falling Waters, United States
BARRETO TRENCHER 712-MT SELF PROPELLED WITH HONDA ENGINE. THIS EQUIPMENT IS DESIGNED FOR EASY TRENCHING. DIGGING FORWARD AND BACKWARD MAKES EASY FOR THE OPERATOR TO ACCOMPLISH A BIGGER TASK QUICKLY. THE 712 MT MICRO TRENCHER FEATURES A UNIQUE AUTOMATIC WHEEL DRIVE PROPULSION SYSTEM. IT UTILIZES A LOAD SENSING HYDRAULIC VALVE TO ADJUST THE TRENCHING WHEEL SPEED TOTHE LOAD ON DIGGING CHAIN
0 bids Free Shipping
Condition: Used Location: Morris, United States
2021 Groundhog T4 trencher in very good condition. Honda GX160 engine that runs great. It will trench up to 18" deep. Comes with a carrier hitch for hauling. If you have any questions or need a shipping quote please call Ben at [phone removed by eBay]. Thanks
0 bids Free Shipping
Condition: Used Location: Sulphur, United States
Components are protected yet easily accessed and maintenance costs are minimal. WHY BARRETO?. Electric start is standard on all models. Efficient and functional, the. In keeping with the Barreto standard, the.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039. gives more power to STIHL 029,M 90 MS310. The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved.
0 bids Free Shipping
Condition: New Location: 金东区, China
This is the complete engine motor suitable for STIHL MS290 MS310 MS390 029 039. gives more power to STIHL 029,MS290 MS310. Cylinder 1.
0 bids Free Shipping
Condition: New Location: , China
The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved. Material: Alloy. Cylinder 1.
Buy It Now
Free Shipping
Condition: Used Location: Southampton, United States
BARRETO TRENCHER 712-MT SELF PROPELLED WITH HONDA ENGINE. DIGGING FORWARD AND BACKWARD MAKES EASY FOR THE OPERATOR TO ACCOMPLISH A BIGGER TASK QUICKLY. THE 712 MT MICRO TRENCHER FEATURES A UNIQUE AUTOMATIC WHEEL DRIVE PROPULSION SYSTEM.
0 bids Free Shipping
Condition: Used Location: Sulphur, United States
With accessible yet protected components, maintenance costs are minimal. WHY BARRETO?. Trenching up to 48” deep and 6” wide, these trenchers will take on anything that is thrown at them. This gives outstanding traction on wet soil, clay, sand, or steep terrain while softening the impact on any existing landscaping.
0 bids Free Shipping
Condition: Used Location: Farmingdale, United States
Self Propelled Walk Behind Trencher. -Only 89 Hours.
Buy It Now
Free Shipping
Condition: Used Location: Morris, United States
2018 Barreto 20RTK trencher with 131 hours in good used condition. It has a Honda GX630 gas engine that runs good. It has been serviced and is ready to use. 6" wide combo chain with a 36" bar. It comes as pictured with a Barreto tilt trailer. If you have any questions or need a shipping quote please call Ben at [phone removed by eBay]. Thanks
0 bids Free Shipping
Condition: Used Location: Kingsport, United States
Floor Polisher Advance 2 G1600. Like new moving just don't need it works great no dents no cracks bumper made on polisher.great for a all office showroom this machine has no pads or scrubbing brush
Buy It Now
Free Shipping
Condition: Used Location: Scranton, United States
2006 vermeer tc4A trencher 2 cylinders diesel engine Very low hours only 360We shipBig iron equipment 1200 s 5th ave Scranton pa 1850457086222042679018439
Buy It Now
Free Shipping
Condition: New Location: , United States
Ground Hog Part Number: 60340. This one is fromGround Hog and isGENUINE.
0 bids Free Shipping
Condition: New Location: 金东区, China
For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Bore: 40mm. Cylinder 1. The alloy material is coated with anti-corrosion paint, the surface is smooth, and the service life is greatly improved.
0 bids Free Shipping
Condition: Seller refurbished Location: , China
Fits RD880, RD11, RD12-90, RD16-100 Wacker rollers. Wacker Neuson 0078795, 5000078795. This Flexible Coupling Kit has the following specification(s) We will get in touch promptly in 24 hours. Concerns wouldn't be necessary since we promised to be on your side.
0 bids Free Shipping
Condition: Seller refurbished Location: , China
Fits RD880, RD11, RD12-90, RD16-100 Wacker rollers. Wacker Neuson 0078795, 5000078795. This Flexible Coupling Kit has the following specification(s) We will get in touch promptly in 24 hours. Concerns wouldn't be necessary since we promised to be on your side.
0 bids Free Shipping
Condition: New Location: 金东区, China
For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Bore: 40mm. Cylinder 1. Replace Part # For 4134 020 1214.
0 bids Free Shipping
Condition: New Location: 金东区, China
Bore: 40mm. Cylinder 1. Replace Part # For 4134 020 1214.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039.
0 bids Free Shipping
Condition: Seller refurbished Location: , China
Fits RD880, RD11, RD12-90, RD16-100 Wacker rollers. Wacker Neuson 0078795, 5000078795. This Flexible Coupling Kit has the following specification(s) We will get in touch promptly in 24 hours. Concerns wouldn't be necessary since we promised to be on your side.
0 bids Free Shipping
Condition: Seller refurbished Location: , China
Fits RD880, RD11, RD12-90, RD16-100 Wacker rollers. Wacker Neuson 0078795, 5000078795. This Flexible Coupling Kit has the following specification(s) We will get in touch promptly in 24 hours. Concerns wouldn't be necessary since we promised to be on your side.
Buy It Now
Free Shipping
Condition: New Location: , China
This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039. Cylinder 1. gives more power to STIHL 029,M 90 MS310.
0 bids Free Shipping
Condition: New Location: 金东区, China
Bore: 40mm. Cylinder 1. Replace Part # For 4134 020 1214.
0 bids Free Shipping
Condition: Seller refurbished Location: , China
Fits RD880, RD11, RD12-90, RD16-100 Wacker rollers. Wacker Neuson 0078795, 5000078795. This Flexible Coupling Kit has the following specification(s) We will get in touch promptly in 24 hours. Concerns wouldn't be necessary since we promised to be on your side.
0 bids Free Shipping
Condition: New Location: 金东区, China
For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Bore: 40mm. Cylinder 1. Replace Part # For 4134 020 1214.
0 bids Free Shipping
Condition: Seller refurbished Location: , China
Fits RD880, RD11, RD12-90, RD16-100 Wacker rollers. Wacker Neuson 0078795, 5000078795. This Flexible Coupling Kit has the following specification(s) We will get in touch promptly in 24 hours. Concerns wouldn't be necessary since we promised to be on your side.
0 bids Free Shipping
Condition: New Location: , China
Bore: 40mm. Cylinder 1. For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Replace Part # For 4134 020 1214. The alloy material is coated with anti-corrosion paint, the surface is smooth, and the service life is greatly improved.
0 bids Free Shipping
Condition: New Location: , China
Bore: 40mm. Cylinder 1. For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Replace Part # For 4134 020 1214. The alloy material is coated with anti-corrosion paint, the surface is smooth, and the service life is greatly improved.
0 bids Free Shipping
Condition: New Location: , China
Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039. gives more power to STIHL 029,M 90 MS310.
0 bids Free Shipping
Condition: New Location: , China
The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved. Material: Alloy. Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Cylinder 1. Replace Part # For 4134 020 1214. The alloy material is coated with anti-corrosion paint, the surface is smooth, and the service life is greatly improved.
0 bids Free Shipping
Condition: New Location: , China
Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039.
0 bids Free Shipping
Condition: New Location: , China
Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039.
Buy It Now
Free Shipping
Condition: New Location: 金东区, China
The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved. Material: Alloy. Cylinder 1.
0 bids Free Shipping
Condition: New Location: , China
Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039.
0 bids Free Shipping
Condition: New Location: 金东区, China
For FT250 HT250 F 50 F 50R F 02 FS120 F 00. Cylinder 1. Replace Part # For 4134 020 1214.
0 bids Free Shipping
Condition: New Location: , China
The alloy material is coated with anti-corrosion paint, the surface is smooth and the service life is greatly improved. Material: Alloy. Cylinder 1. This is the complete engine motor suitable for STIHL M 90 MS310 MS390 029 039.
|
|
|
|
up for bid is 2004 BARRETO LANDSCAPE EQUIPMENT TILT TRAILER! BILL OF SALE ONLY! NO TITLE! 36"X 44" working area 8" rims great for landscape equipment. Portable generators, mid size tillers, whatever the job requires. 500-600 lb capacity nice handy unit. a contractor/rental grade tool. take a look at the pictures and decide. tired of renting? ready to own? very expensive new. unit weighs 400 lbs all equipment is sold AS-IS WHERE-IS w/ no warranty. shipping costs are the sole responsibility of the buyer. yes we ship to canada you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows pick-up is available On Nov-25-07 at 07:27:27 PST. Seller added the following information:
|
|
This is an E-Z Trench Groundsaw model EZ9100. It is powered by the always-reliable Honda engine producing 6.5 hp. The unit pictured IS the unit you are buying. As pictured. It is in good condition, and it has just been inspected, operated, and serviced. As such, it is being sold as job ready. The EZ9100 was built for durability and performance. It has a centrifugal clutch drive that is bathed in oil, which provides protection against extreme conditions and abuse. The Groundsaws are the fastest digging small trenchers on the market. Carbide bits cut right through tree roots and hard soils with our progressive biting blades. We offer shipping anywhere in North America at the buyer's expense. We can ship these units on a pallet to any business address with a loading dock or forklift for a ... morereduced price. E-Z Trench Groundsaw 9100 Specs: Please contact us for shipping quotes or with any questions through ebay messaging. Or call us at 1-866-444-4116.
|
|
|
PRE-OWNED. USED, GROUND HOG 18" GAS TRENCHER T-4-HS. RUNS GOOD. HONDA 5.5 HP. 3" X 18" BULLET CHAIN. DIGGING DEPTH = 18" PLUS OR MINUS. OPERATOR PROPELLED. WEIGHT = 250 LBS APPROX. CONDITION AS IS. PICTURES ARE ACTUAL. PAY PAL NOT ACCEPTED NOTES: CONDITION IS AS IS. NO WARRANTY IS EXPRESSED OR IMPLIED. FREE PICK UP DOES NOT MEAN FREE SHIPPING. ALL ITEMS WILL BE LOADED FOR SHIPPING FREE OF CHARGE. ALL SALES FINAL. NO RETURNS, EXCHANGES OR REFUNDS ALLOWED. THE SAFE USE OF THIS EQUIPENT IS THE BUYERS RESPONSIBILITY. SELLER WILL NOT BE LIABLE FOR USE OR MISS-USE OF THIS ITEM. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13de7eea427-0x100-
|
|
This is a very good running/ operating trencher that will dig up to 36" deep and 4" wide. Machine has both cupped and rock teeth(shark teeth) Sprocket is in about 60-70% condition. Teeth are in about 70% condition as well as the chain. Auger shows wear on edges as expected for age. But still works fine and won't need replaced. Honda engine is 13 h.p. gross- and runs great. The tires hold air. And the tread on drive tires are about 50% This machine features trenching speed setting. Which allows you to engage the trencher at proper speed, and not have to worry about controlling and maintaining the speed. I can ship Worldwide. Please contact me for quotes. Call me at 678.215.3489 Thanks We are a husband and wife team with no employees and the lowest possible overhead. That means ... morewe can sell quality used equipment at a lower price than anywhere else. We scour the country to find the best in quality pre-owned heavy equipment and machinery possible and pass the great savings of a small operation to you. We are large enough to find the piece of equipment you are looking for. But small enough to offer you the best price around. We take pride in representing our equipment honestly and call it as we see it. We strive to describe each machine thoroughly and accurately to give you the knowledge and peace of mind that the machine is what you are looking for and will operate in the way you expect it to. Even though we do not offer a warranty. Each machine is thoroughly inspected and tested prior to delivery and is ready to go to work when you receive it. We are proud to have delivered quality equipment across the US. Canada, Australia, Czech Republic, Poland, Bulgaria, Germany, Switzerland, Africa, Libya, Liberia and the UK. Our customers are satisfied when they receive their equipment as is shown in our 100% positive feedback. The cost of shipping is typically less than what you may expect as we deal directly with the trucking companies and do not use a broker. We pass these savings directly on to you and do not
|
|
|
DITCH WITCH TRENCHER MAKE DITCH WITCH MODEL 1230 SERIAL 111713 GX390 ENGINE 13HP 3FT DIGGING DEPTH MACHINE WEIGHS 820 LBS MACHINE IS IN GOOD WORKING CONDITION ALL ITEMS ARE LOCATED AT OUR BUSSINESS LOCATION 307 CROFT RD PEMBROKE VA 24136 PLEASE CONTACT JOSH AT 540-320-8606 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE WE DO REQUEST CASHIERS CHECK OR WIRE TRANSFER FOR ANY TRANSACTIONS OVER 1500 DOLLARS THANKS
|
|
2002 VERMEER SP15 Walk Behind CABLE PLOW– 2 Blades 2 CABLE Plow Blades KOHLER Engine(Command Pro 15) Runs Great! Original Owner! This Cable Plow is privately owned by a small business owner in Brooklyn MI. It has never been stored outdoors. It has never been left overnight on a job site. All vehicles and equipment owned by this company are stored in professional clean storage facilities. All vehicles are properly maintained and receive regular scheduled service. History files available on site. You simply will not find equipment of this age in better condition. This unit is ready to be put into immediate service. To see this item. Please call: 517) 592-3568 or(517) 438-2157 Payments accepted: Cashier's Check or Cash. NOTE* I am also selling FOUR CASE Cable Plows/ Backhoes ranging in price ... morefrom $6.900 up to $29,900. They can all be seen at the same location in Brooklyn, MI. 1980 CASE DH4 DIESEL CABLE PLOW/ HYDRA BORE/ BACK-FILL BLADE with 1214 HOURS- $6.900 eBay Classified# 21434317 2001 CASE 860 DIESEL TURBO CABLE PLOW/ BACKHOE with 3171 Hours- $29.900 eBay Classified# 21399767 2001 CASE 860 DIESEL TURBO CABLE PLOW/ BACKHOE with 852 Hours- $29.900 eBay Classified# 21432935 1999 CASE 660 DIESEL CABLE PLOW/ BACKHOE/ HYDRA BORE with 3540 Hours- $18.500 eBay Classified# 21433772 Also for sale are numerous Utility trucks and vehicles from this business liquidation(Underground Services) Please call for a complete list. 517-592-3568 or 517-438-2157 Buy with confidence. Please Call or Email me with any questions. I can usually answer you very quickly. Check out my! Be sure to add me to your!
|
|
|
For sale Ditch Witch 1030H 24inch trencher has GX390 13hp Honda engine. New tires and newer chain. Unit runs great and trenches great. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e04b31bce-0xf9-
|
|
|
THIS IS A'04 DITCH WITCH TRENCHER 1030. S/N 1Y2939* WALK BEHIND TRENCHER* HONDA GS340 11 HP GAS ENGINE* 2.5 FOOT BAR WITH A 5" CUT* NEW CHAIN RUNS AND OPERATES GREAT. PLEASE EMAIL BROWNEQUIPSALES@GMAIL.COM OR CALL VICTOR 423-760-0400 OR WES 423-779-8660 FOR ANY QUESTIONS OR SHIPPING QUOTES.
|
|
|
Vermeer RT100 walk behind trencher in excellent condition.No belts all hydraulic drives and cylinders.13 HP Honda.Serviced and ready to dig.Vermeer is top of the line unit and built to last.New sprocket and lower bearing added since pics were taken,You may send trucker and I will assist loading(forklift) but I will not ship.This unit sells new around the $15,000.00 price.Will sell for $3500.00.If owner picks up in person a certifide check with proper ID will suffice.Otherwise cash or bank to bank wire are the only other options,You may inspect and test before buying(recommended)Call Ken@ 715-874/5965.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e04b31c32-0xf2-
|
|
PRE-OWNED. USED, VINTAGE VENDO COCA-COLA MACHINE MULTI-VEND V-81. PICS = 65. THIS MACHINE HAS BEEN PROFESSIONALLY RESTORED COSMETICALLY. THE INSIDE IS ORIGIONAL. BUT LOOKS TO BE ALL THERE. THE COMPRESSOR IN THE BOTTOM IS ORIGIONAL. KEYS FOR THE DOOR ARE INCLUDED. THE OUTSIDE LOOKS ALL RESTORED. I BOUGHT THIS FOR MY OWN COLLECTION ABOUT 8 YEARS AGO AND ACTUALLY BOUGHT THE COKE IN GLASS BOTTLES AND VENDED IT TO MYSELF AT.10 CENTS EACH. THE OUTSIDE LOOKS BEAUTIFUL AND LIKE IT SHOULD ATLEAST TO ME. WHEN IT WAS LAST PLUGGED IN IT DID COOL AND VEND PROPERLY. MULTI-VEND WILL HANDLE: 8 OZ. 10 OZ, 12 OZ SIZES OF SODA BOTTLES. ALSO WILL VEND LONG NECK BEER BOTTLES. WATER BOTTLES AND JUICE BOTTLES. IT HAS A FUNCTIONAL NATIONAL COIN MECH. IT IS SET UP TO ACCEPT A TEN CENT COIN. CONDITION AS IS. PICTURES ... moreARE ACTUAL. PAY PAL NOT ACCEPTED NOTES: CONDITION IS AS IS. NO WARRANTY IS EXPRESSED OR IMPLIED. FREE PICK UP DOES NOT MEAN FREE SHIPPING. ABSOLUTLY NO SHIPPING. ALL SALES FINAL. NO RETURNS, EXCHANGES OR REFUNDS ALLOWED. THE SAFE USE OF THIS EQUIPENT IS THE BUYERS RESPONSIBILITY. SELLER WILL NOT BE LIABLE FOR USE OR MISS-USE OF THIS ITEM.
|
|
|
HI. UP FOR SALE IS A DITCH WITCH MODEL 1330 TRENCH CUTTER THIS UNIT COMES WITH A POWERFUL 11 HP HONDA ENGINE AND AN OPERATION MANUAL, THIS UNIT HAS BEEN TESTED AND IS IN GOOD WORKING CONDITION. THANKS FOR LOOKING AND PLEASE Check out my! Be sure to add me to your!
|
|
|
2006 RT200 walk behind trencher in excellent condition.No belts all hydraulic drives and cylinders.23 HP twin Kohler.Hour meter 166 hours.Serviced and ready to dig.Vermeer is top of the line unit and built to last.New sprocket and lower bearing added since pics were taken,You may send trucker and I will assist loading(forklift) but I will not ship.This unit sells new around the $20,000.00 price.Will sell for $4000.00This machine is built to last.If owner picks up in person a certifide check with proper ID will suffice.Otherwise cash or bank to bank wire are the only other options,You may inspect and test before buying(recommended)Call Ken@ 715-874/5965
|
|
|
Ditch Witch 1410 walk behind trencher. Runs but is missing the carburetor. Nice tires on back. Serial# 145732. 1106 hours on gauge. Kohler K321S engine. No cumber bar but I do have one listed that you may be able to adapt to fit. I have more pictures. Email address if you would like them. Buyer pays sales tax/title unless you are tax exempt. We can load for free. It can sit awhile as long as it is paid for in full. Questions call. Kevin 231-510-659two. Item is located in Michigan, about 3 hours north of the Indiana border.
|
|
PLEASE CALL BEFORE PURCHASING! USED DITCH WITCH 1030. 2FT DIGGING DEPTH. GREAT MACHINE- RUNS GREAT AND READY TO WORK. HONDA ENGINE. CANY QUESTIONS OR SHIPPING QUOTES PLEASE MESSAGE US OR CALL RYAN@ 724)887-9375 DURING BUSINESS HOURS. THANKS FOR YOUR BUSINESS. ANY ADDITIONAL QUESTIONS PLEASE ASK. OR CALL RYAN OR TIM AT 724-887-9375 THANK YOU FOR YOUR BUSINESS*ATTENTION BUYER* ALL ITEMS SOLD AS-IS. WHERE-IS*ALL SALES FINAL* EQUIPMENT SOLD WITH A BILL OF SALE* ALL SHIPPING COSTS WILL BE COVERED BY THE BUYER. SELLER WILL LOAD PURCHASED EQUIPMENT AT NO CHARGE TO THE BUYER. SELLER WILL ALSO HOLD THE ITEM UP TO 30 DAYS AT NO CHARGE TO THE BUYER. THE BEST PLACE TO GET SHIPPING QUOTES IS FROM FREIGHTQUOTE.COM OR USHIP.COM· WE DO HANDLE SOME LOCAL DELIVERIES. WITH-IN OUR AREA. ANYONE WHO CARES ... moreTO HANDLE SHIPPING WITH THEIR LOCAL COMPANIES OR AFFILIATES ARE WELCOME TO DO SO. PICK UP CAN BE ARRANGED ANYTIME THROUGH OUT THE DAY BY PRE- ARRANGING IT WITH US. ANYONE IS WELCOME TO COME TO OUR PHYSICAL LOCATION TO TEST OUT ANY OF OUR EQUIPMENT FOR SALE. WE ARE LOCATED AT 1 WEDDING LANE MOUNT PLEASANT. PENNSYLVANIA 15666, APPROX 48 MILES SOUTHEAST OF PITTSBURGH, IN THE SOUTHWESTERN PART OF THE STATE· PENNSYLVANIA SALE TAX IS 6% IF YOU PICK UP EQUIPMENT AT OUR YARD. UNLESS TAX EXEMPT, YOU MUST PAY SALES TAX. IF EQUIPMENT IS SHIPPED OUT OF STATE, THEIR WILL BE NO SALES TAX· ANY QUESTIONS CONTACT US AT 724-887-9375
|
|
i000000. Walk Behind Trencher Ditch Witch 1020(Stock#1171) Description: The Ditch Witch 1020 walk-along trencher is designed for residential and short-run commercial service line work including gas. Water, sewer, electric and communications lines requiring trenches up to 6 inches(150 mm) wide and 30 inches(760 mm) deep. This unit is set up with a Honda 11.0 horse power motor. This unit is in very nice shape and is set up with a hard material chain with the carbide teeth. Unit is ready to go to work. So look close at the pictures and call with any questions@ 702-966-0194 or 702-448-3390 Thanks& have a wonderful day! Shipping: We encourage you to Call before you bid. And call if you have any Questions. Shipping: We are not responsible for shipping. But we will be happy to assist you in loading ... moreout. We have great loading facilities with forklifts and loading docks to assist in delivery and pick up. O wners and Operational Manuals: M ost of the equipment that we offer for auction is used. Typically these machines do not come with owners manuals. If we do have the owners manuals for the machine we will include it with the machine free of charge. Terms and Conditions We are a small reputable honest company. If you have any questions or concerns we are here from start to finish. Thank you for your participation and good luck bidding. Hey Life's full of choices let us help solve a few. Don't let this chance pass You up. We inspect each piece of equipment to the best of our mechanical ability. This listing has been prepared as a guide only. Based on the information that we have access to at this specific time. All of this information is believed to be reliable and accurate but is not guaranteed. Everything that is listed on auctions is free of liens and encumbrances. We will release the serial numbers to the winning bidder after the auction. Bid with confidence that you are buying quality equipment from a quality company. Payment: We Only accept Deposits made Via PayPal not to exceed $5000.00. The remaining b
|
|
|
2006 Barreto 1324D Ditch Witch Trencher and tilt trailer. Rebuilt hydraulic and blade motors($1800.00 worth of work) Honda motor. Please see pictures for condition. Call with any questions. Local pick-up or buyer must arrange freight. Thank you for looking. Please see our other items for sale.
|
|
|
Pace trailer in good condition. For sale by owner. Model:Journey. Tandem Axel 16'x8' Electric Brakes. Rear Ramp Entry. Peuter Metallic. Shipping not included. Please contact New England Lawn& Golf: John Lenhart jlenhart@gmail.com or 781-561-5687.
|
|
DITCH WITCH 1330 TRENCHER WITH TRAILER Up for auction is a 2006 Ditch witch 1330 trencher with trailer. This unit is in great condition and ready to go to work! It is powered by a 13 hp honda with Electric start. That starts and runs great! It has fresh oil, new air filter and spark plug. The chain is a heavy duty shark tooth combo chain, it has a 44" trench bar and hydraulic driven forward and reverse. It also has two speed transport and the tires are in good condition. It is a model# 1330HE, serial# CMW1330HH60000452. Please check with the manufacturer at www.ditchwitch.com for complete specs. This machine is expensive new. Heres your chance to save! The machine can be shipped via Interide Logistics or Vitran Express. Just give me your zip code and I will run a quote for you. All of ... moremy shipping quotes are to a buisness with unloading capabilities. If this is to be shipped to a residence please indicate. If you need a liftgate truck for delivery. Please specify. Please contact us for available Payment Methods. Buyer will pay a $25.00 fee to pallet the machine. Payment is due within 3 days of the end of auction. If shipping out of the country, buyer is responsible for any fees or taxes there country may impose. Colorado residents will pay an 7.1% tax. After payment is recieved I will coordinate shipping within 1-3 days. I do my best to accurately describe the items and test the items to the best of my ability. We staff a mechanic and are very knowledgeable. Used equipment will have dings. Dents, scratches in the paint, minor cracks and chips. Equipmentstop reserves the right to end an auction early. Not all items sold by Equipmentstop are weighable by Equipmentstop, therefore some items shipping weights are a best estimate. Feedback will be left after feedback has been recieved. If you have a question or concern, please ask before bidding. If you have an issue with the item after receiving it please contact me before leaving feedback. I will work to resolve the issue with in reason. I want happy customers an
|
|
2004 Ditch Witch 1030H Walk Behind Trencher This Includes: 2004 Ditch Witch 1030H 36" Bar Honda GX390 Gas Engine Axle Lock Condition: This is in used operating condition. It runs and operates. It does have wear, please see pictures for condition. Trades: We accept trades of construction electronics and specialty construction items. This includes Trimble. Topcon, Leica, Spectra Precision, Greenlee and many more quality brands. Please contact us through Ebay or call if you have a trade 360-798-7268. Shipping: This will ship freight. Please contact me for a quote. Payment: We Accept Paypal. Payment must be made within 3 days or transaction will be cancelled. Returns: We do accept returns for 14 days. Buyer pays return shipping and a 15% restock fee. Unless there was a listing error. Sales ... moreTax: Washington State sales tax of 7.8% will be charged when item is shipped to Washington Only About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions. We value your business!
|
|
Trench Master. Made by Brown. Model F702. Trench Master. Made by Brown. Model F702. This machine starts up and runs fine. It has a Wisconsin Industrial Motor- Model WE-180. The gas line tube has been replaced and it looks like one wheel may have been replaced. This will be shipped by freight or you may come and pick it up. Email me for shipping cost or pick up details. Please scroll up and look at all of the pictures in the listing. The pictures are detailed and help to describe the item. Email me with any questions. Please make all payments within 5 days of ending of auction. All items will be shipped within 5 business days of cleared payment. Please ask questions before the item is sold. I offer many different items through Ebay. That I have bought at local yard sales, auction or flea markets. ... moreI do my best to check them out and describe them. If I make a mistake please let me know so that we can work it out. If it is my fault I will correct it, please remember I am not an expert on the items that I sell so please view the pictures and read the descriptions completely, Thanks Farm2000 Please contact me with any questions are concerns about any item that I have listed or sold. I will email you back. Farm2000
|
|
Up for sale is a complete Ditch Witch PT30 Air Piercing Tool with reversible controller. Hoses and pierce arrow. This is a good working unit ready to go to work on your project today. This air over hydraulic rammer. Thumper, bore tool or whatever you want to call it can save you tons of time and money when installing pipe and conduit under finished surfaces using the trenchless method. If you have questions or want to have a look. Call me at 916two8713nine9. Thank you The Ditch Witch PT30 Piercing Tool is designed for short- to medium-range compaction boring projects. Pipe ramming and pushing and pipe pulling, Ditch Witch rammer piercing tools can successfully complete installations for municipalities, plumbing contractors, electrical contractors and landscaping contractors at a lower cost ... morethan Horizontal Directional Drilling HDD or Boring methods. The PT30 provides a low cost method of installing utility and service lines under sidewalks. Driveways, streets or other surface or areas where larger traditional open trench methods aren't feasible. Ditch Witch Piercing Tools perform short- to medium-range compaction boring projects, pipe ramming and pushing, and pipe pulling. KEY FEATURES: Quick reverse feature-Reliability as a result of 1/3 fewer parts than competitors-Ease of maintenance-Replaceable heads and multiple accessories available tags: hole hog trenchless underground mole piercing tool grundomat no dig mole pierce arrow landscaping plumbing tools line horizontal directional boring hammerhead vermeer landscaping irrigation excavation trenching hammerhead rammer thumper ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f5e7a0dc3-0xfa-
|
|
up for bid is 2003 BARRETO TRENCHER 1324D MODEL 4WD SELF PROPELLED W/ HONDA! AS IS NO RESERVE REQUEST A SHIPQUOTE BEFORE YOU BID! Designed for cable and telephone line installers. Irrigation contractors, and rental stores, the RT 200 packs plenty of power into a compact, easy-to-use unit. we can provide shipping for this unit but to a commercial/business address w/ semi access and load dock or large forklift. NO RESIDENTIAL DELIVERY. welcome to pick up item at OUR location zip code 44624 and we will help you load. NO TITLE/CERTIFICATE OF ORIGIN- BILL OF SALE ONLY! Honda GX390 engine nice handy unit. a contractor/rental grade tool. unit in good operating condition and runs and operates as it should. take a look at the pictures and decide. tired of renting? ready to own? very expensive new. ... moreunit w/accessories weighs 1000 lbs all equipment is sold AS-IS WHERE-IS w/ no warranty. shipping costs are the sole responsibility of the buyer. yes we ship to canada you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows call or e-mail for ship quote. or pick-up is available On Nov-25-07 at 07:27:27 PST. Seller added the following information:
|
|
|
VIBRATORY PLOW CAME OFF A DITCH WITCH 410SXD SOLD AS IS PLEASE CONTACT US WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE
|
|
SKU: SB60909 A: 0015000000bCw7m O: 0065000000O08Mk PA: 0015000000VvVTW View Photo Gallery. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a 2005 APT 131 Backfill Tamper in fair condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: APT Model: 131 Serial ... moreNumber: 700188 Shipping Weight: 75lbs Shipping Dimensions: 56"L x 10"W x 10"H Features/Specifications: Net Weight: 75lbs Impact Rate: 670 bpm Bore and Stroke: 1.5" x 5.5" AFM@ 90 psi: 38-42 Butt Diameter: 6" Condition: Former rental unit in fair overall condition- piece broken- see photos Unit is in average overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: Buyers will be assessed a $10 handling fee for the local pickup of item(s) as shown above. Please see the Shipping tab(below) for more details including the location of the item. We accept Paypal for items s
|
|
|
Excellent. Little used machine. Paint is still decent down by the cutters. Has a 5" blade on the machine,and also includes a brand new 7" blade and 2 brand new belts.Starts easy on 2-3rd pull everytime,if choked correctly.Once its warm,wont need to be choked at all,will start on 1 pull.5 horsepower briggs and straton engine.I never used this machine much,but i used it to bury cable for cattv.sorry for the foggy pictures,my camera lense kept fogging up. I cannot ship this so it will have to be picked up in Greensboro NC area. wanna call me i can be reached at 336-989-7051. No Reserve. i have included a video that shows it running and working properly.
|
|
This auction is for a Bobcat 2021 Self Propelled Vibratory Plow Trencher Combo. This unit is being SOLD AS IS FOR PARTS OR REPAIR! Bobcat 2021 Same As Burkeen B30 Bobcat Bought Them Out! UNIT IS BEING SOLD FOR PARTS OR REPAIR! Splined Shaft For Rear End Is Broke And Needs Fixed Comes With 3' Trencer Bar Wit Fair Teeth And Works Good Vibratory Plow Works Good With A Fair Blade Comes With Bore Atttachment That Works Center Pivoit Has Wear Comes With Factory Wheel Weights Lost Of Good Parts On This Unit Or A Good Project There Has Been A Few Weld Reapirs Hatz 2 Cylinder Diesel Starts And Runs Good No Smoke SOLD AS IS FOR CASH SEE VIDEO! Please see all pictures and video. Please ask any questions you may have we will be glad to help. We can ship no problem! Please just email or call for a ... morefreight quote 24/7. We Give a 5 Star Service on Ebay and are ready to help in any way. If you have any questions please ask I Will be glad to help Just Email or Call(814)658-3066 Thanks Nick Payment: For payment we will take the following: $250.00 Paypal depoist due with in 24 hours of the auction close. Remainder due with in 5 business days. Shipping Costs: We DO NOT mark up any shipping prices. What it costs me it will cost you. There is no pallet fee. No loading fee and no banding fee. We get a 70% discount with our freight broker on LTL shipments and we pass that along to you. We make no money on shipping! Please understand diesel fuel is almost $5.00 a gallon. We are glad to help in any way with customer pickups also. Please when letting feedback on the DSR remember We are Providing a 5 Star Service and Would Like a Five Star DSR Rating In Return. Please if you have any questions call us we are glad to help(814)658-3066 Thanks Nick. PA Sales Tax: Please Read! PA Residents are subject to 6% PA SALES TAX! Unless you provide a PA Tax Exemption form for Resale or Farm Use. If you are from out of state and you have your item shipped to your state you are NOT SUBJECT PA SALES TAX! If it is shipped IN the stat
|
|
|
HERES A DAVIS TASK FORCE 500 TRENCHER WITH BACKHOE AND DOZER BLADE HAS A 2 CYLINDER WISCONSIN ENGINE WORKS GOOD(484)336-7709 RICH
|
|
1030 Ditch Witch Walk Behind Trencher New Honda Motor(7.1 Hrs) New Paint Check out my! I f you are not satisfied with your purchase for any reason. PLEASE give us an opportunity to make it right before leaving feedback. Positive feedback will be left the day item ships. All Items are shipped Monday through friday. Shipping- Freight or local pick up. Use freight.com above or contact us for more options. Payment- Payment is due within 3 days from close of auction. We accept Paypal. And E-Checks. If Paying with an E- Check. It can take up to the following times to clear, we can not ship until the payment clears: U.S. up to 4 business days Canada- up to 8 business days UK- up to 9 working days Australia- 7-8 working days Our Mailing Address is: Blue Star Rental& Sales 1007 Belvedere-Clearwater ... moreRd. North Augusta. SC 29841 PAYMENTS MADE USING PAYPAL CAN ONLY BE SHIPPED TO THE PAYPAL CONFIRMED ADDRESS. Return Policy- No return on this equipment. Ask all questions before you buy, we can provide more pictures or video if you would like. Our return address is: Blue Star Rental& Sales 1007 Belvedere-Clearwater Rd. North Augusta. SC 29841 Local Pick-Up- Local pick up is available on all items at our above address. State and local sales tax will be charged. The item must be paid for at the time of pick up. $1.00 handling fee will be charged.Please contact us for the details. Items may be picked up Monday thru Friday 7:00 AM to 5:00 PM. PLEASE KNOW YOUR AUCTION NUMBER. Powered by The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Aug-20-12 at 13:06:14 PDT. Seller added the following information:
|
|
This ad is for a 2007 Ditch Witch 1330 self-propelled trencher with trailer. This setup retailed for approximately $12.000 new, and this is your chance to own a good used one at a fraction of the cost! The 1330 is powered by an always-reliable Honda engine producing 13 hp. It has a general purpose chain mounted on a 30" bar. And the sprocket is in good shape. This unit has been operated, serviced, and inspected, and is being sold as 100% job ready. We have also inspected and serviced the trailer, which includes wheel bearings and lights. We offer local pick-up(30102) and can ship this unit to any business in North America that's equipped with a dock/forklift at the buyer's expense. Paypal can be used as a deposit. But we ask that items over $2500 be paid for via cashier's ... morecheck, bank wire, or some form of certified funds. Ditch Witch 1330 Specs: GENERAL Ditch Witch model 1330. Self-propelled, hydraulic, walk-behind, manually steered, two-wheel drive, rigid frame, chain-type trencher DIMENSIONS* U.S. Trench depth. Max. 36 in Angle of approach 35° Angle of departure 35° Trench width. Min to max 4.3 in- 6 in Boom travel. Down 60° Boom travel. Up 60° Centerline trench to outside edge of machine. Left 15 in Centerline trench to outside edge of machine. Right 18 in Headshaft height 8.6 in Transport height 47 in Transport length 84 in Wheelbase 32 in Spoils discharge reach 10.6 in Width. Transport 33 in Tread 26 in OPERATION U.S. Vehicle speeds Maximum transit forward 120 fpm Maximum transit reverse 96 fpm Digging chain speed. Max. 275 fpm Spoils handling(single. Open-end auger) auger-size Outer diameter 12 in Inner diameter 4 in Length 9 in Trencher cleaner type: Mechanical Trencher cleaner size 4 in- 6 in Operating weight(based on roller boom and narrow-width digging chain) 920 lb POWER U.S. Engine Honda GX390 Type 4-stroke. Overhead valve Fuel Gasoline Cooling medium Air Number of cylinders 1 Displacement 23.7 in3 Bore 3.5 in Stroke 2.5 in Manufacturer's power rating 13 hp Rat
|
|
|
EquipmentCity.com- Used Equipment for Sale 131 Hours, CAT DIESEL WATER COOLED ENGINE, HYDROSTATIC DRIVE. INFINITELY VARIABLE FROM ZERO TO MAXIMUM, LEVER OPERATED SPEED/DIRECTION CONTROL, Boring Attachment, ARTICULATED-FRAME STEERING ENABLES THE 410SX TO MANEUVER AROUND TREES AND OTHER OBSTACLES. VIBRATORY PLOW WITH SHAKER, WILL PULL PIPE UP TO 3" DIAMETER, OSCILLATING REAR AXLE ALLOWS FOUR-WHEEL DRIVE TO PROVIDE EXCELLENT TRACTION. Stock# 1178, Serial# CMW410SXC50000062, If you have any questions. Please call Luke at(309) 524-5877. Illinois buyers will owe 6.25% sales tax. All equipment is sold as/is but is in the condition that is described in our ads. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-140a594f55e-0xf0-
|
|
|
2007 Ditch Witch 420sx. Already has the bore, trenchor and plow attachment. Tractor on its own has a value of 45,000 new and each attachment is an additional 8,000 to 12,000 for each. Total value of equipment with attachments 75,000.
|
|
Barreto 912HM Walkbehind Trencher Honda 9hp gasoline Engine This trencher was being used to trench into sandy dirt to run Pvc piping for security company cctv system. It has been very well cared for. It has low hrs of use. It has always been stored indoors. There is nothing broken on it or about to break. The trailer is also in excellent conditions! The engine is a Honda GX290 9hp Pull Start gasoline unit. Turns right on. On first pull. idles great. Trailer is also included. Unit will come with its paperwork for you to register at your local tag agency. Unit is in excellent working conditions. You will not be disappointed. This unit sold for $13.000 including the trailer. The unit has recently been serviced and oil levels checked. Hydraulic oil filter changed, spark plugs and air filter replaced. ... moreAll bearings greased. Pictures posted are of the actual trencher in its current conditions. This is not an abused or retired fleet unit. Please compare this unit with those currently on ebay. No comparison in conditions. Unit ships to the lower 48 U.S. States via Freight Carrier. Canada Shipping also available. Unit will be strapped to a pallet and sent Insured. You must have a commercial address and a way of unloading from rear of freight trailer. You may also pick up at your local freight company. Residential deliveries will be $150.00. Commercial deliveries will be free. Ready to work as soon as it arrives. Unit is perfect. This is truly an amazing deal. This unit comes with the larger boom size available. It is preowned so it does have its normal scratches and scuffs. These trenchers in these conditions have been selling in machinerytrader.com for about $7.500 and who knows its history. This one will sell to the highest bidder at end of auction! Unit will be ready to ship as soon as payment is made. Thank you and good luck! Shipping Only* We are trying to grow our business here on ebay. We strive for customer satisfaction! We want you to be happy with your purchase and save us as your favorite seller for future pu
|
|
You are bidding on a good used Baretto 1324 D trencher.It is powered by a 13 HP Honda engine. 24" bar with carbide teeth. This trencher is all hydraulically powered. No belts to change or slip. Commercial grade unit. Buyer is responsible for all shipping cost. I can arrange freight shipping, email me with zip code, and if commercial or residential. I can deliver for approx $2.00 per loaded mile. Shipping price will vary depending upon your location. NYS residents, ALL pickups, and deliveries to a NY address add 8% sales tax, unless you are tax exempt with proper form. Money orders, cashiers checks, and wire transfers ship immediately. Personal checks take 10 days to clear. Deposit is required to consider machine sold. Balance is due within, 10 days, contact me within 3 days of auction ... moreend. Please take a minute to check out my other auctions. Buyers always welcome to come pick up at central NY's largest architectural salvage yard, Shaver Brothers 32 Perrine st. Auburn, NY 13021 give us a call@ 1-800-564-7206 or email me with any questions. Visit my about me page. VIEW MY OTHER AUCTION ITEMS effepbdc Finance This Equipment For Your Business- Click Here
|
|
|
Trencher Information Below: Year: 1996 Type: Trencher Make: VERMEER Model: V3550 Hours: 424 Attachments: This is Trencher and trailer combo. Machine is in good condition, it has low hours for the year and everything works as it should Price: $10 995 OBO Description: This 3550 was bought in 1998 and has been used very little. The service work has always been performed by Vermeer. This machine is said to be in work ready condition. Very clean, and straight body. The Do-Little 16' trailer comes with the machine and will not be for sale separately. I have included a picture of the hour meter off of the machine and the SN:plate more pictures are available upon request.
|
|
VERMEER RT-60 TRENCHER HONDA MOTOR WORKS GREAT ONLY 37 HOURS OF USE VERMEER RT-60 TRENCHER HONDA MOTOR WORKS GREAT ONLY 37 HOURS OF USE. THIS UNIT HAS SEEN VERY LITTLE USE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. ... moreOUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Excavator Trencher Sand Dirt CONVEYOR How-To Build PLANS Plans to build the Super Scooper. Designed for removing dirt from a excavation. The dirt is hand shoveled into the buckets and travels up the scooper and is automatically dumped into a wheel barrow. Truck, or trailer. Can be built to whatever size you need. Powered by a small electric motor. Built with commonly available materials. This is an original 3 page magazine article from 1970. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Complete Instructions, SHIPPING TERMS: Buyer to ... moreprepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority mail service. Add $1.75 to total if you would like insurance with delivery confirmation. $3.00 for shipping to Canada. $5.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
|
|
|
Ditch Witch cable plow attachment. Complete, good tires, vibratory cable plow, new blade, PTO drive, Priced to sell. Call 304-346-5938 with any questions. Additional photos available.
|
|
This ad is for a 2010 Ditch Witch RT12 self-propelled trencher with trailer. This unit only has 206 hours of use! It retailed for approximately $15.000 new, and this is your chance to own a good used one at a fraction of the cost! This RT12 is powered by an always-reliable Briggs and Straton engine producing 16 horsepower. It has a general purpose chain mounted on a 36" bar, and the sprocket is in good shape. It has just been operated, serviced, and inspected, and is being sold as job ready. We have also inspected and serviced the trailer, which includes wheel bearings and lights. We offer local pick-up(30102) and can ship this unit to any business in North America that's equipped with a dock/forklift at the buyer's expense. Paypal can be used as a deposit. But we ask that items ... moreover $2500 be paid for via cashier's check, bank wire, or some form of certified funds. Serious buyers. Please contact us for shipping quotes or with any questions through ebay messaging, or call us at 1-866-444-4116.
|
|
|
This is a Burkeen trencher that was repainted Case colors. The machine is in excellent operating condition. The chain is 4 inches wide with rock and regular cutting teeth. Chain has little wear. A Onan 16 HP gas engine that starts and runs with no smoke and plenty of power. Front tire was just replaced and rears have good tread. This trencher has a high and low range. Forward and reverse chain travel, rear wheel steering, hydraulic boom up and down etc. I used it last to install a water line from well to house. A good operating easy to use machine. Hour meter shows 801. Pickup 20 miles west of Philadelphia. Pa. 19342- Payment at pickup after operating is OK.
|
|
|
Up for sale is my Ditch Witch 410SX. It runs good. I have owned it for a couple of years. The only flaw to it is the paint. I thought of painting it first then it would look really good but decided to sell it as is. It has the trencher. Boring unit and the plow comes with a pipe pulling blade and I have a wire pulling blade as well. Model: 410SX Comments: VIBRATORY PLOW MAX DEPTH 14" TRENCHER MAX DEPTH 24" WIDTH 45" HEIGHT 42" LENGTH 151" 34HP DIESEL LISTER-PETTER ENGINE, OPERATING WEIGHT 3900LBS, MAX SPEED FORWARD 2.4MPH, MAX SPEED REVERSE 1 MPH, MAX TRENCHING SPEED 5000 FPH, MAX PULLING SPEED 8000 FPH/IN GOOD SOIL,
|
|
EZ Trench Groundsaw Trencher. Model EZ 9100. Trenches 2 1/2" x 13" deep. S/N 910684. This unit is in great condition. The N Groundsaw model was built for durability and performance. It has a centrifugal clutch drive that is bathed in oil. Which provides protection against extreme conditions and abuse. The Groundsaws are the fastest digging small trenchers on the market. Carbide bits cut right through tree roots and hard soils with our progressive biting blades. Uses: Irrigation LP/Propane Gas Lines Low Voltage Electrical Drainage Root Pruning Silt Fence(erosion barrier) Rental Specs: Rate of Cut: Approximately 100’ in 5 minutes. This is subject to soil conditions) Progressive Cutting Carbide Blade: Cuts hard soils and tree roots. Replaceable heavy-duty carbide bits are very durable. ... moreNeat& Clean Trench: 2 ½” wide trench from 0 to 13” deep. Engine: Honda provides ample power& torque for trenching in tough conditions. The new wet clutch drive system protects your equipment and investment. Weight: 250lbs. Easily loaded and transported without having large trucks or special trailers. This unit as sold new today. Cost about $4,500.00. Getting parts is no problem, check the EZ Trench website, for more information. PLEASE SEE ALL PHOTOS. ALL ITEMS ARE SOLD AS IS. NO WARRANTIES OF ANY KIND ON ANYTHING. About us: We are the only Buy. Sell, Trade Commercial equipment location in the area. Formerly Beverly Rental Depot, LLC. We have a large stock from our rental store that is now our current inventory. A lot of items for sale here on ebay and locally. If you have a Zero(0) feedback. Call before bidding or bid will be canceled. Pickup only items: Pickup location is: K& L EQUIPMENT. LLC BEVERLY RENTAL DEPOT 131 5 TH ST, BEVERLY. OH 45715 M-TH 8am– 3pm. Friday and Saturday by Appointment If buyer wants item shipped. Buyer will send us bill of lading at FAX 740-984-2607. We have loading facilities. And will assist with palletizing, and loading free of charge. We will NOT quote shipping. Arrange shippin
|
|
GROUND HOG T-4 18 INCH TRENCHER HONDA MOTOR WORKS GREAT GROUND HOG T-4 18 INCH TRENCHER HONDA MOTOR WORKS GREAT. THIS UNIT HAS SEEN VERY LITTLE USE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER ... moreIS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
VERMEER RT 200 Walk Behind Trencher. 48" bar with rock tooth chain. Kohler 23hp Command twin cylinder gas engine. Has 326.0 hours on it. No trailer. Runs and operates as it should. Vermeer RT200 Pedestrian Trencher Specifications BASIC UNIT U.S. Weight- Base Tractor 1300 lbs Length- Base Tractor 79" ENGINE 1 U.S. Model& Make Kohler Command CH-23 Fuel Type Gasoline Gross Horsepower 23 hp Displacement 41.1 cu-in Number of Cylinders 2 Cooling Medium Air Maximum operating angle(fore/aft) 25 deg Maximum operating angle(left/right) 25 deg CAPACITIES U.S. Fuel Tank 5 gal Engine Oil w/ Filter 2 qt Hydraulic Tank 8 gal Hydraulic System.5 gal GROUND DRIVE U.S. Type Hydrostatic STEERING U.S. Type Two Wheel- Hydraulic Outside Turning Diameter 30' Maximum Turning Angle 23 deg TRENCHER ... moreU.S. Chain Speed 512 ft/min Chain Tensile Strength 34000 lbs Auger Type Single Auger Size 18" OD Drive Type Hydrostatic PLEASE SEE ALL PHOTOS. ALL ITEMS ARE SOLD AS IS. NO WARRANTIES OF ANY KIND ON ANYTHING. About us: We are the only Buy. Sell, Trade Commercial equipment location in the area. Formerly Beverly Rental Depot, LLC. We have a large stock from our rental store that is now our current inventory. A lot of items for sale here on ebay and locally. If you have a Zero(0) feedback. Call before bidding or bid will be canceled. Pickup only items: Pickup location is: K& L EQUIPMENT. LLC BEVERLY RENTAL DEPOT 131 5 TH ST, BEVERLY. OH 45715 M-TH 8am– 3pm. Friday and Saturday by Appointment If buyer wants item shipped. Buyer will send us bill of lading at FAX 740-984-2607. We have loading facilities. And will assist with palletizing, and loading free of charge. We will NOT quote shipping. Arrange shipping, or pay for shipping. period) Shipping: Items with shipping charges will be shipped 1-3 days after payment has been received via UPS or USPS. UPS will not ship to PO Boxes. We do not ship out of the USA. Payment: We accept Paypal. We will accept green money if picking item up. Other forms of payment may or may not be acc
|
|
VERMEER RT 200 Walk Behind Trencher. 36" bar with rock tooth chain. Kohler 23hp Command twin cylinder gas engine. Has 201.8 hours on it. No trailer. Runs and operates as it should. Vermeer RT200 Pedestrian Trencher Specifications BASIC UNIT U.S. Weight- Base Tractor 1300 lbs Length- Base Tractor 79" ENGINE 1 U.S. Model& Make Kohler Command CH-23 Fuel Type Gasoline Gross Horsepower 23 hp Displacement 41.1 cu-in Number of Cylinders 2 Cooling Medium Air Maximum operating angle(fore/aft) 25 deg Maximum operating angle(left/right) 25 deg CAPACITIES U.S. Fuel Tank 5 gal Engine Oil w/ Filter 2 qt Hydraulic Tank 8 gal Hydraulic System.5 gal GROUND DRIVE U.S. Type Hydrostatic STEERING U.S. Type Two Wheel- Hydraulic Outside Turning Diameter 30' Maximum Turning Angle 23 deg TRENCHER ... moreU.S. Chain Speed 512 ft/min Chain Tensile Strength 34000 lbs Auger Type Single Auger Size 18" OD Drive Type Hydrostatic PLEASE SEE ALL PHOTOS. ALL ITEMS ARE SOLD AS IS. NO WARRANTIES OF ANY KIND ON ANYTHING. About us: We are the only Buy. Sell, Trade Commercial equipment location in the area. Formerly Beverly Rental Depot, LLC. We have a large stock from our rental store that is now our current inventory. A lot of items for sale here on ebay and locally. If you have a Zero(0) feedback. Call before bidding or bid will be canceled. Pickup only items: Pickup location is: K& L EQUIPMENT. LLC BEVERLY RENTAL DEPOT 131 5 TH ST, BEVERLY. OH 45715 M-TH 8am– 3pm. Friday and Saturday by Appointment If buyer wants item shipped. Buyer will send us bill of lading at FAX 740-984-2607. We have loading facilities. And will assist with palletizing, and loading free of charge. We will NOT quote shipping. Arrange shipping, or pay for shipping. period) Shipping: Items with shipping charges will be shipped 1-3 days after payment has been received via UPS or USPS. UPS will not ship to PO Boxes. We do not ship out of the USA. Payment: We accept Paypal. We will accept green money if picking item up. Other forms of payment may or may not be acc
|
|
2005 Ditchwitch 1330 Trencher Hydraulic Chain Drive Frost Chain- higher strength with tooth at every link 6" setup w/ 1/2 cup cutters and 1/2 rock teeth 24" bar- max dig depth Pivot assembly tight. Good sprocket and chain. Hydraulics strong. No leaks. Engine runs great. This machine is ready to use. If you have any specific questions pertaining to the machine. Please call Dennis at 704-880-4942, between 08:00 and 17:00 Eastern Time. We will not discuss pricing- that is what bidding and make offer buttons are for. This unit is for local pickup only. However, if you arrange for shipping we do have a loading dock and the ability to load this onto a truck, which we will handle without additional charge. Sale Conditions: If you have fewer than 3 E Bay transactions please contact us first! ... moreThe $500 deposit is due within 24 hours of auction close. Please note that PayPal is only required to bid and pay the $500 deposit. WE WILL NOT ACCEPT PAYPAL FOR ANY PART OF THE REMAINING BALANCE! Payment must be by cash upon pickup or wire transfer. And is required within 7 days of auction close. If you have any questions about the payment method. Contact us before you bid. $500.00 due within 24 hours of auction. The rest is due with cash or wire transfer within 7 days of auction We reserve the right to end this auction/listing early. This machine is for sale locally We will not handle shipping of the machine or be responsible for binding it to your truck or trailer. But are more than willing to help load. There are many brokers out there that are your best bet for getting a decent price on shipping. Do an internet search, and be sure to get 2 or 3 prices. It's actuall y surprisingly reasonable. Specs for shipping info can be found at ditchwitchdotcom Sales to those with a North Carolina address must be charged sales tax at 6.75% Outside of North Carolina. Tax payment and re porting will be the buyers responsibility.
|
|
Vermeer Diggin Dutchman Ditch Digger Machine Operators Manual M Series M30 Please scroll down the page for more pictures. Manual is in excellent clean condition. Seperate sections marked M30 M437 M450 M465. M147A. M50. T600. T400. T 218. Feel free to make an offer. Shipping quote includes insurance and/or delivery confirmation as well as extra packaging materials to assure safe delivery of your item. RETURNS WILL ONLY BE ACCEPTED FOR A SUBSTANTIAL ERROR OR OVERSITE IN THE LISTING. I try to do my best to describe the items but am NOT an expert on many of these items I sell. Please LOOK AT THE PICTURES CAREFULLY.these are part of the description. Ask questions if you have them! Most of the items will be out of Wisconsin estates and are used and will not be perfect! If you have no Paypal account ... moreplease contact me for options. Shipping costs have gone up A LOT recently. Be sure to observe the postage options(usually a couple)I try to ship Priority Mail. But a lot of the time it is just out of line for cost. You see the shipping cost given in this listing.that is what you will pay. If you think there is a mistake please get in touch before auction end! After you win the auction: IF YOU BOUGHT MORE THAN ONE ITEM. you will have to wait until I see about combining your shipping and sending you the modified invoice I CANNOT give a combined shipping discount if you pay BEFORE you get this combined invoice. Look in your" My Ebay" which is accessible by clicking at the top of Ebay pages.for status of your purchase and tracking. Powered by
|
|
|
This is a very good condition privately owned(not used commercially) 2011 Ditch Witch RT12 hydrostatic walk behind trencher with a miniscule 95.2 hours on it. When not in use. It has been stored in a heated garage. Operating this trencher is a lot easier than the old-school walk behind trenchers that you have to strong arm to steer. The drive tires are hydrostatic controlled independently by two separate levers. The Engine is a 16 h.p. Vanguard by Briggs& Stratton. With a fresh oil& new filters(Oil& Air) The drive tires show little wear and the chain& teeth are in very good condition. Also, a tilt trailer for it(with new lights& wiring) is included. This trencher will easily make trenches up to 6" wide and 36" deep all day long.
|
|
HELLO! UP FOR SALE IS THIS MODEL T-4 TRENCHER BY GROUND HOG INC. ALTHOUGH IT DOES EXHIBIT SOME VISIBLE WEAR FROM PREVIOUS USE/STORAGE. THIS WALK-BEHIND TRENCHER IS UNDAMAGED; IT STILL RUNS WELL AND IS IN GREAT CONDITION TO BE USED ONCE AGAIN. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. The Ground Hog T-4 Trencher is a small. Operator propelled, chain-type trencher designed for jobs requiring up to a 12 or 18 inch deep trench. Heavy gauge powder coated steel is used throughout the T-4's construction as well as tapered roller bearings and double-row ball bearings to ensure trouble-free service. Over 60 years of experience in the Rental, Construction and Landscape industries has produced a design that is very durable and easy to maintain, which leads to a fast return on investment. ... moreSPECIFICATIONS: Engine Power, 4 kw(Honda& Briggs) 4.3 kw(Subaru) Maximum Trench Depth, 12 or 18 inches(depends on model) Trench Width, 3 or 4 inches(depends on model) Maximum Chain Speed, 180 feet/Minute(60 meters/Minute) Weight, 230 lbs. 104.5 kg) Length, 60 inches(152 cm) Width, 24 inches(61 cm) Height, 41 inches(104 cm) $300 SHIPPING THANKS FOR LOOKING! Check out my! Be sure to add me to your!
|
|
|
2012 Ditch Witch XT855. Only 534 Hours. This unit is like new. 31.5 HP Kubota Turbo Diesel. Tracks are 100% Very Clean. Well Maintained Unit. Seldom Used. Always Kept In A Heated Garage. Payment Is By Way Of A wire Transfer Only. This Is A Great Price! These Units Usually Sell For Over 40K. No Problem. This Unit Is For Sale Locally. Seller Reserves The Right To Cancel This Offer At Any Time. Payment Is By Way Of A US Funds Money-Order or Wire Transfer Only. Paypal Is Not Accepted. FREE DELIVERY IN CONTINENTAL USA
|
|
|
NO RESERVE: DITCH WITCH V252 VIBRATORY PLOW 1262 HOURS ON METER ONAN 25HP ENGINE TWO SPEED HYDROSTATIC TRANSMISSION 3/4 X 8" BLADE ROTO SWITCH CONTROLS SERIAL 4D0058 I am the 2nd owner. User and maintainer. 3-motorcycle trailer pictured can be included for additional $100. Please call to discuss(732)493-8196- Manny. Do not hesitate to ask any questions, will discuss& consider all legitimate offers. Item is also advertised locally.
|
|
|
I have a 2007 vermeer rt100 trencher with vermeer tilt trailer. Trencher has a 48 inch bar and runs and operates great. 311 hrs. Honda 13 hp engine. Ready to work. The nice thing about using a vermeer trailer is never needing to tie it down as it has a mechanical locking mechanism built on the trailer. Very nice setup. Call josh with any questions 4195660675 No Paypal unless you want to pay the 3 percent fee. I will ship at your cost or can help arrange shipping. Note I'm pricing this way below any other rt100 trencher trailer combinations with only 311 hrs. Bid today. Look on your equipment sites and you will find that this is a great deal. Just Lowered Price. $3300. In the spring it would be $4500. Posted with
|
|
|
Trench depth 24" width 4" Spacers can be added to make trench 6" wide Kawasaki 15 hp gas engine 2.1 gallon gas tank Hydrostatic drive Very simple. Low maintance design. Weight around 1200 lbs Transport dimensions 100" L) x 35"w) x 48" H) Unit Has been tested and has no known problems We can put on a pallet and load. My zip is 95376. Approximate shipping cost to commercial address with loading dock: $400 up to 1.000 miles. $650 up to 2.000 miles. $650+ to 2.000+ miles.
|
|
|
Burkeen trencher. Has trencher. Boring, and vibrating plow. Everything works as it should. Diesel engine, 4x4, articulating steering. Comes with some used boring rods. New belts, oil change, oil filter, hydraulic fluid, hydraulic filter, belts, and ignition. Burkeen B30. Great for installing irrigation systems and boring under driveways, streets, sidewalks. Running plumbing or electric. Tractor, skid steer, zero turn, backhoe, loader, trailer, equipment 901-351-7882 Posted with eBay Mobile Posted with
|
|
|
DMR FR600 Wire/Cable Trencher. This used trencher is in great condition. Just tuned up and inspected with a clean bill of health(as usual) I bought this trencher new in 2006 for the purpose of trenching dog fence wire for my business. This trencher will bury the wire up to 6" deep depending on soil conditions. The blade is an upgrade to the"Radical Blade" and has carbide teeth. All of which are in excellent condition. The trencher was used conservatively since 2006, it is not excessively or overly used. The trencher has been kept up to date with maintenance and runs, trenches and buries the wire perfectly smooth. This trencher is available for local pickup only. Feel free to contact me with any questions.
|
|
|
2000 ditch witch 255sx awd runs good but could use tires soon. Comes with pull blade and feed blade and a honda 24 horse engine. We are looking to buy a bigger machine so have to sell this one. Does need a battery but will start with a jump. Does have the hydro bore but no rods. This machine could pay for itself on its first job. Selling as is to highest bidder. Works great for sprinkler or utility lines. Fits through fences. Save money and buy a nice used machine. Item is in Lincoln ne but can deliver up by Minneapolis mn as well. Feed blade is brand new never put in ground yet and cost over $600.00
|
|
|
2008 EZ Trench Cable Installer. Install hidden pet fence. Low voltage lighting, control wires and more all in one operation. The EZ Cable Installer digs a trench, lays a wire or cable and backfills the trench. Honda GX200 starts and runs good. Well maintained. Includes extra set of belts and owners/parts manual. Pick up only. Call Jeff with any questions at 260-489-1450
|
|
|
Great condition! Trailer included in price TRX- 20 Only 265 hours 20 HP Trenches up to 36" deep- Adjustable Track drive increases hill-side stability Hydraulic drive Easy to use controls 19" diameter wheel to tooth Kawasaki Engine Compact size with big performance! Tracks in great condition Call Jon Struckhoff or Tom Noltkamper at 636.745.3311
|
|
|
2001 Ditch Witch 36" Trencher Starts easy and runs great. The previous owner recently replaced the belts and it has had very little use since then. Normal wear from use. Everything operates fine. He only traded it in due to lack of use. Buying as is. Feel free to come try it out. This item must be picked up at our location in Cumberland. VA 23040. 5.3% sales tax will be charged to final price. Call or email with any questions. Thanks!
|
|
|
Up for sale is one Burkeen model B16 trencher in very good condition. It has an ONAN 18hp gas engine. The trencher chain is 4" wide and 32" depth. We have two extra chains and one extra hydraulic pump that go with it. The hour meter reads 166. But it is broke. Everything runs and works well. We will load it to your truck for no additional fee. We won't set up or pay for shipping. If the buyer wants to set that all up. We will gladly load it. All forms of payment accepted. Personal and business checks must clear the bank prior to shipping. Feel free to email with any questions. Please look at my other auctions!
|
|
|
Great trencher starts and runs great with combo chain. 2 brand new spare tires and wheels Buyer responsible for pick up or delivery Posted with,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-143badfd769-0xef-
|
|
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 917365 A: 00130000002zo0b O: 0065000000NKYsq PA: View Photo Gallery. Request Freight Estimate. Location: Sacramento. CA 95826 Item Description. You are bidding on a Barreto 1624D Walk Behind Trenche r in parts and repair condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Barreto Model: 1624D Serial ... moreNumber: Unknown Shipping Weight: 900lbs Shipping Dimensions: 98"L x 38"W x 46"H Features: Hydrostatic drive Rubber tires V-twin engine Specifications: Engine: Vanguard 16HP Trench depth: 36" Trench width: 4" Tire size: 16x6.50-8 Ground speed: 180FPM Chain speed: 260FPM Condition: Former rental unit in parts and repair condition- engine does not start or run- all major components intact Chain and sprocket show normal wear for age Tires are in good condition Unit is in good overall cosmetic condition for age See photos for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights, dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: Buyers
|
|
|
I think it is about a 2005-2006 model. It has an 11 HP Honda engine. It came from a local cable company. Where they thought they would use it, but did not. It has probably installed about 50 drops. It comes with cable plow blade, cable spool holder and Honda engine. Runs great. No problems. It is ready to work. For specs on item. Visit the Ditch Witch website. Buyer is responsible for pick-up or shipping.
|
|
|
Used Great shape Good working order. Payment due paypal only at time of aution ends. Buyer pics up or arainges shipping. 9 H.P DIRECT MOLE Horse Power: 9 Weight: 115(52kg) Torque: 97 Width: 33" 89cm) R.P.M. 600 Length: 59" 150cm) Gearbox: 6 to 1 Wheels: 15" x 6" 38x15cm) 7 Extension Rods 1 rock bit 1 CLAY REAMER 1 pvc Cable Puller
|
|
|
Everything works out very well like brand new. Has only 449 hours, beautiful and perfect for irrigation systems and burning cables jobs contact number: 678 891 9557
|
|
DITCH WITCH 1330 13 Hp WALK BEHIND TRENCHER DIGGER W TRAILER SERIAL-CMW1330HH70000842 HOURS-679 THIS IS A NICE LOW HOUR TRENCHER WITH MATCHING DITCH WITCH TRAILER. WE STAFF A MECHANIC AND WHO HAS GONE OVER THE UNIT.IT IS READY TO GO TO WORK. THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION.WE GET GREAT RATES.EMAIL ME FOR A QUOTE! THERE IS A $25 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items ... moresold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladl
|
|
|
If you are interested in buying. Please before bidding contact me at suswell36@gmail.com to get shipping quotes. I would like to explain the TERMS of sale. Buy it now option available. Contact me at my work e-mail suswell36@gmail.com Only used 7-8 times at one job site to trench through soft dirt. Comes with Trailer Unit has the expensive combination Shark Tooth Chain and Longer Boom Powered by Vanguard's 16hp Electric Start gasoline engine Unit is not refurbished or reconditioned. It comes with its bill of sale. Owners Manual and Registration for Trailer Unit is immaculate and will not disappoint. It truly is perfect and ready to work.
|
|
|
For more detailed info please call or text Luke at 419-231-1803 asking 1500 or best offer might be able to help with shipping Posted with
|
|
Ditch Witch 255sx irrigation pipe puller/trencher. This unit has been serviced by Ditch Witch of New England in Shrewsbury. Ma and all service records are on file there. I have had the battery replaced, vibratory plow piston replaced, all 4 tires in 2013, fuel tank sent out and had it boiled and recoated, u joints, tie rods replaced and bearings repacked. Engine runs real strong. Machine has 1419 hrs on it. I will include a plow blade but not the one that it pictured. New this machine is $20,000. They still make this exact same machine with no changes. I also have the Operators manual and parts manual on hand. I have been the sole operator of this machine, I don't have any employees, I work a full time job and Install irrigation on the side by word of mouth, I only put in about 4 new systems ... morein a year so this machine has very little use and will pay for itself in one season depending on how aggressive you are. Please feel free to call me 978-979-0474 I have over 600 positive transactions with nothing to hide. WILL NOT SHIP LOCAL PICK UP ONLY $100 PAYPAL DEPOSIT DUE AS SOON AS THE AUCTION ENDS NO EXCUSES. REMAINING BALANCE DUE IN CASH UPON PICKING THE MACHINE UP. THIS MACHINE WILL FIT IN THE BACK OF A FULL SIZE PICK UP TRUCK ITS APPROX 1500 LBS;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143ec8e72cd-0x109-
|
|
|
I have a Vermeer RT60 walk behind trencher for sale. It works as in should and looks good for its age. It runs a Honda gas engine. Can ship via freight. Ask for shipping quote. Ask all questions before bidding. Call or text 770-862-4653 with any questions. Posted with
|
|
|
I have a EZ Trench TP310 wire and cable trencher for sale. It has a Honda engine that runs good. Can ship via freight. Ask for shipping quote. Ask all questions before bidding. Call or text 770-862-4653 with any questions. Sold as is. Posted with
|
|
VERMEER V430 TRENCHER 32hp DEUTZ DIESEL DOZER Backfill Blade 4 WAY DOZER BLADE 4 WHEEL D R IVE HEAVY DUTY TRENCHER OPEN ROPS TRENCHER IS FOR SALE LOCALLY This trencher runs and opperates and was used on a job as you can see the mud on it. But does need some things. One the hoses going to tilt on the blade busted and the hydro system needs flushed, trencher chain needs tightened, breaks need adj. or new pads works with pedal but not with parking brake, the battery cables need new ends you have to wiggle them sometimes to get conection to start. the top is a golf cart top comes with it but needs something to hold up the front, it was a quick fix to block the sun in july here in florida. There may be something Im missing so you should come and inspect before the end of auction because this unit ... moreis being sold as-is where is. so pickup only I dont offer shipping I require a $300 non refundable deposit by paypal( to cover Ebay fee's) and the remander cash at pickup. must be picked up and payed for withen 14 days from the end of auction.
|
|
|
2010 Hinowa 23.12 Crawler Aerial Manlift. Only 161 Hours. This lift Is In Showroom Condition. New These Lifts Are Over $185,000. This Unit Was Our Demo Unit Only. Very Little Usage. Hinowa Is The Top Brand On The Market. This Lift Is Only 34" Wide, Weighs Only 6,600 lbs. And Can Reach 76 Feet. To See This Lift In Action Simply Go To You Tube And Search Hinowa 23.12 This Unit Is Sold FOB Grand Portage, MN. Payment Is By Way Of Wire Transfer Only. Paypal Is Not Accepted. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1440a9045e2-0xfa-
|
|
|
2001 Vermeer V2050 Trencher. Kohler Gas Engine. Turn Key Start. Brand New. 12 volt battery. Hydraulic drive& operation. 50 inch Rock chain. Starts Runs& works good. Shipping Quotes. Nation wide trucking and WORLD Wide Shipping rates available on request Questions? Offers. Please e-mail or Call for details.503-545-0007 Serious Buyers and Winning Bidders Some type of Contact is Required with in 72 hours To Secure Sale* This item is also Advertised in other Publications. First come First Serve. DON'T WAIT BID Today. Payment
|
|
|
Walk behind trencher with a 36" digging bar. The chain has heavy duty carbide teeth. The engine is a Honda GX390 13 hp gasoline engine. This machine is a low 87 hour clean machine that comes with the single axle trailer as shown in the picture. If you are the winning bidder $500.00 is due within 24 hours of the auction end. The balance is due within 7 days( cash or wire transfer) We reserve the right to end this listing at any time. This machine is for sale locally. We will assist in loading, shipping is buyers responsibility. We will charge sales tax if the purchaser is from North Carolina. Ditch Witch S/N: CMW1330HE80001444 Trailer S/N: 1DSB071A571700508 This unit comes with a bill of sale only(No title)
|
|
|
This is a great running/ operating walk-behind trencher that is in very good condition. Chain has both carbide tipped cupped teeth and carbide tipped shark teeth for rock. Machine is ready to work. And a 2008 Ditch Witch trailer is included.I will let the pictures do the rest of the description
|
|
|
The machine is in perfect working condition. Auger has some cosmetic damage but does not affect operation of the machine. Boom can cut to 48" depth 6" wide. low hours on the 18 HP Honda motor! Only 312! Auction includes Ditch Witch trailer pictured.
|
|
2003 BARRETO 1824D SERIAL# D2269 18 HP Honda motor Pull Start 36inch max depth 4 wheel drive Combo digging chain(carbide shark/cup) NEW chain roller ALL owners manuals included 2001 Ditch Witch S1A Trailer Tilt D-rings Removable coupler( can put any size coupler on) comes with 2 inch 2000lb GVW Length-78 inch Width-54 inch Tires are dry rotted(size 5.70-8) 5 lug bolt pattern CONDITIONS OF SALE*ATTENTION* WHEN BIDDING FOR AN ITEM ON EBAY THE BUYER IS RESPONSIBLE TO SEEK ANY AND ALL INFORMATION HE MAY NEED ABOUT AN ITEM HE WISHES PURCHASE FROM THE SELLER. VIA PHONE, FAX, OR EMAIL. THE BUYER ALSO ACKNOWLEDGES THE ITEM IS SOLD“AS IS“ AND“ WHERE IS“ BUYER IS RESPONSIBLE FOR ALL STATE TAXES… BUYER IS RESPONSIBLE FOR ALL EXPENSES RELATED TO SHIPPING. PACKAGEING OF THEIR PURCHASE… BUYERS MAY ALSO ... morePICK UP THEIR PURCHASE. MONDAY-FRIDAY DURING NORMAL BUSINESS(CLOSED HOLIDAYS) HOURS BY CALLING AHEAD… ITEMS RELEASED. AFTER PAYMENT IS RECEIVED… ALL SALES ARE FINAL* SELLER RESERVES THE RIGHT TO REFUSE TO SELL SAID ITEM TO ANYONE NOT IN AGREEMENT WITH EBAYS OR SELLERS RULES OR TERMS OF SALE. INSPECTION. OF THIS EQUIPMENT DESCRIBED BY THIS NOTICE OF SALE IS SOLD"AS IS" AND"WHERE IS" TAYLOR RENTAL AND ITS EMPLOYEES OR AGENTS ARE NOT AUTHORIZED AND HAVE NOT MADE ANY STATEMENTS. REPRESENTATIONS OR WARRENTIES. WRITTEN OR ORAL, REGARDING'THE PERFORMANCE OR CONDITION OF THE USED EQUIPMENT. BUYER ACKNOWLEDGES THAT PRIOR TO BUYING THE ITEM(S} HE HAD A FULL OPPORTUNITY TO EXAMINE AND INSPECT IT(IN OPERATION IF APPROPRIATE) AND HE IS AWARE OF ITS CONDITION AND IS SATISFIED THAT THE PRICE AGREED UPON FAIRLY REFLECTS THE CONDITION OF THE ITEM AND TAKES INTO CONSIDERATION ANY DEFECTS KNOWN OR UNKNOWN. OF THE ITEM. WAIVER OF WARRANTY* TAYLOR RENTAL CTR. EXPRESSLY DOES NOT MAKE AND BUYER HEREBY WAIVES ANY AND ALL WARRENTIES. EXPRESSED OR IMPLIED, INCLUDING ANY WARRENTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRENTY REGARDING QUALITY. CONDITION OR SAFETY. BUYER RELEAS
|
|
|
2007 Ditch Witch S1A Trencher Trailer. Tilt, 2000lb. GVWR, 6'6' Long x 54' Wide, 5.70-8 Tires. Very Nice Trailer Heavy Built For Shipping Quotes Call ECHO LOGISTIC 312-784-2008 We will palletize and assist getting items ship ready. CAROLINA SPECIALTY PRODUCTS specializes in good used equipment from Aerial Lifts. Skid Steers& Attachments, Trenchers, Trailers, Air Compressors, Generators, Lawn and Landscaping to Hand Tools and much more. We strive to sell good ready to use equipment. For any questions, information, more pictures please give us a call. 336-859-5505 Located 5595 NC Hwy 49 Denton NC 27239 Hours are Monday- Friday 7:30-5:00 Saturdays 8-1 Items are also sold locally.
|
|
|
used walk behind trencher trench master model F1201 ser# 1941 9 hp honda runs good but may need carb cleaning as it needs choke on tires hold air but are weather checked.i will assist loading to shipper or truck of your choice but would prefer pick up at my location
|
|
Up for Auction is this Preowned/ Like New: Toro TRX-20 Walk Behind Track Trencher You are bidding on a like new Toro TRX-20 Walk-Behind Track Trencher. Unit has only 62 hrs of use. Unit is not refurbished or reconditioned. It is practically in new conditions. Comes with everything pictured including Custom Trailer. Unit will arrive with its paperwork to register in your state. This is a gasoline powered. Hydraulic trencher with Kawasaki V-twin FS600v 24hp electric start engine. This trencher is amazing, its quality surpasses those Ditch Witch models. This unit has the bigger boom size and combination dirt/shark tooth chain. This trencher including trailer sold for $16,000 including sales taxes when purchased in 2013' Please Google model number and read owner testimonials, there is not ... morea better trencher out in the market today. This unit will sell to the highest bidder at end of auction. Item will arrive exactly as pictured. It will not be used and has not been used since the taking of these pictures. Shipping is $625.00 to the lower 48 U.S. States Canada Shipping is $1.100.00 Insurance is included. No Local pickups PayPal preferred. Other payment methods accepted as well. Thank you and good luck bidding! Customer satisfaction is our upmost concern. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this item fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is received. We usually have items ready to ship by the end of auction. We are an e-commerce business. We sell strictly online. We do not offer local pickups. We don't have the proper place of business or the proper insurance requirements to greet o
|
|
|
This is a 1983 ride on ditch witch trencher. Runs and trenches flawlessly. It has just over 1000 hrs on the Koehler engine. Very reliable. Chain and teeth are only a couple years old and have seen very little use. This is my personal trencher not used for commercial work. Tires are foam filled so no need to worry about a blow out. Ignition switch has been replaced with a key switch and push button. 4-way plow plenty of power. I have a video but cannot find a way to post it on eBay so. If anyone would like to see it I can text or email it to you. THIS IS A NO RESERVE AUCTION! Someone will get a great machine. I can deliver for a fee. Don't wait for the auction to end, the buy it now price is a very good price. Go ahead and compare to many others on eBay. Posted with
|
|
Check out our video of this machine running/ operating in our yard This is an excellent running/ operating hydrostatic walk-behind trencher. This model is so much easier to operate and run with hydrostatic power and steering which allows the operator to steer and maneuver with ease. Honda engine runs just as it should. Machine is ready to work. Trenches 4" wide trench and 36" deep. Teeth are both cupped and rock shark teeth. Sprocket is 90% and machine is just as it should be at only 328 hours. Worldwide shipping is available- including AQIS cleaning available for Australia and New Zealand Please call me at- 678.215.3489 We are a husband and wife team with no employees and the lowest possible overhead. That means we can sell quality used equipment at a lower price than anywhere else. ... moreWe scour the country to find the best in quality pre-owned heavy equipment and machinery possible and pass the great savings of a small operation to you. We are large enough to find the piece of equipment you are looking for. But small enough to offer you the best price around. We take pride in representing our equipment honestly and call it as we see it. We strive to describe each machine thoroughly and accurately to give you the knowledge and peace of mind that the machine is what you are looking for and will operate in the way you expect it to. Even though we do not offer a warranty. Each machine is thoroughly inspected and tested prior to delivery and is ready to go to work when you receive it. We are proud to have delivered quality equipment across the US. Canada, Australia, Czech Republic, Poland, Bulgaria, Germany, Switzerland, Africa, Libya, Liberia and the UK. Our customers are satisfied when they receive their equipment as is shown in our 100% positive feedback. The cost of shipping is typically less than what you may expect as we deal directly with the trucking companies and do not use a broker. We pass these savings directly on to you and do not charge any additional shipping or handling fees. Call or email us f
|
|
|
For sale is a Ditch Witch 100sx vibratory plow. The plow has dual tires. All four tires appear brand new. The motor is an 11hp Honda and was a replacement at some time or another. Starts on first pull even when very cold. No leaks or burning of the oil. Shaker box functions properly and does not appear to have any major issues. I bought to install irrigation pipe but have decided to go another route. Machine is used so it has chain rash on parts of the frame and handle bars. Machine could use a new pair of hand grips and the throttle cable reattached. Does NOT come with a plow blade. Use the Buy it now and I will deliver for free within 100 miles or so of Columbia. MO 65202 Shipping is possible if necessary. Contact me and we can get anything worked out. Posted with
|
|
up for bid is a 2004 GROUND HOG T-4 18" WALK-BEHIND 5.5 HP TRENCHER WITH HONDA GX160! Easy to use. Operator-friendly controls- Fits through narrow gates and doorways- Will trench close to walls. Fences, etc. 3 operator controlled depth settings digs 3" wide trenches Maximum Chain Speed 180 feet/Minute(60 meters/Minute) Weight 230 lbs. 104.5 kg) Length 60 inches(152 cm) Width 24 inches(61 cm) Height 41 inches(104 cm) a rental/contractor grade unit. take a look at the pictures and decide before buying at the store. expensive new. unit weigh total 250 lbs all equipment and parts is sold AS-IS WHERE-IS w/ no warranty. shipping costs are the sole responsibility of the buyer. yes we ship to canada. you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows ... morethis will ship freight. Call or email for ship quote or pick-up is available
|
|
|
Ditch Witch 410SXC vibratory plow with sod cutter and skid shoe kit purchased new May 2008. Has H400 digging attachment w 36" roller boom. Has 183 hrs. 3013C Caterpillar engine. Comes with 10 RW and other attachements. Will deliver free within 50 mile radius otherwise you will need to make pick up arrangements at your expense. Selling the machine because we just don't use it enough. Purchased for over $35.000 new. Selling as is with no warranty. Please email me if questions.
|
|
|
Ditch Witch C99 9HP very good working condition can be shipped frt collect or prepaid
|
|
|
13" Heavy Duty Blade for Walk Behind Trencher 5lbs- 13" diameter- 1" Center Hole- 1/4" thickness I listed this blade as Used but it has touch the ground for about 60 seconds. It's too heavy for my trencher so it won't turn fast enough to get in the ground. The only wear and tear is what little dirt I couldn't clean off and a few rust spots from the moisture in the dirt. Once I realized it wouldn't work I took it off and it's been back in the box ever since. I bought the blade from a company online called Wes/Tech Resources and they made it special based on the specifications of my trencher so I can't return it. There is absolutely nothing wrong with this blade.
|
|
|
Up for sale is a Ditch Witch 410SX. We purchased a lot from Bell South Communications. All machines come with Trencher, Plow and boring unit. All have been serviced by their fleet department and field tested by us. All units are very tight and ready for the field. This is our 3 rd lot from bell south we had great success with the first two lot's and these 6 look no different than the previous. The one pictured by its self is the one up for this auction. Any questions email me at jlturf@hotmail.com We have a loading dock and can help with shipping
|
|
BROWN BED EDGER TRENCH MASTER W/ WISCONSIN ROBIN 6HP ENGINE. IN GOOD SHAPE WORKS GOOD. PLEASE LOOK AT THE PIC'S FOR MORE INFO AND COND. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII ... moreAPO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
|
|
|
SELLING FOR A FRIEND OF MINE. YOU CAN CALL WITH ANY QUESTIONS 317-691-5143 Said everything works as it should. has a kholer 12 hp and 36 inch dig
|
|
|
Ditch Witch SK500 Spare Parts. Hydraulic Motors. New Sprockets, Track Frames. Also New Hydraulic Pump Assembly. New These Parts Are Over $8.000. FREE SHIPPING" When Using. Buy It Now"
|
|
|
LineWard L2 walk behind vibratory plow with B-2 boring attachment. Everything is here including manuals and instructional video's. Includes 2 pull blades. Large feed blade, and root blade for plow, 5 sections of drill rod, 2 bits, transport box and job box. Kohler 16HP engine starts right up and runs great. No Warranty"AS IS" No Returns- Buyer responsible for pick-up or shipping.
|
|
I'm selling a 2005 Vermeer RT200 Trencher with only 235 hours. The trencher is powered by 23 hp pro kohler commander. Has 62" trencher bar, electric start, it starts easily and runs great. These RT200 trenchers are great units, they have steerable rear wheels(steers hydraulically) This particular RT200 has one of the larger 62" trencher bar- it digs 62" Best part of all this comes with a matching tilt trailer that is designed for this unit, requires no ties down as it has a mechanical locking system built for the trencher. I like these little Vermeer trailers, I've hauled scissor lifts on this, atv's, makes a nice small utility trailer. I've towed the trailer recently a few hundred miles with no issues. You are welcome to come in and inspect this unit before ... morebidding, I assure you if you are in the market for a Vermeer Trencher, this is a great unit. Compare this unit with listing's here Price to Sell- NO Reserve- first bid only $3750 I will work with a shipper of your choice. Payment due within 7 business days. Paypal only for Deposit of 500 after 24 hrs end of auction. I will accept paypal for the entire amount. But I will have to up charge the total 3% to cover paypal fee's. Unit is for sale locally and I reserve the right to end auction early. For any questions please give me a call at 419-566-1173.
|
|
|
UP FOR BIDS IS A LITTLE BEAVER KWIK TRENCHER. IT RUNS GREAT AND EVERYTHING WORKS AS IT SHOULD. WELL MAINTAINED AND KEPT INSIDE. IT WAS A RENTAL UNIT SO IT WAS SERVICED ON A REGULAR BASIS. PLEASE FEEL FREE TO CONTACT ME WITH ANY QUESTIONS. 804)437-9734. HERE IS THE LINK TO THE COMPANY WEBSITE THESE TRENCHERS ARE SO MUCH FASTER THAN CHAIN STYLE DITCH WITCH OR VERMEER TRENCHERS. AND CAN TURN A TRENCH WITH EASE WHERE AS A CHAIN STYLE REALLY STRUGGLES. HERE IS A YOUTUBE VIDEO ALL ABOUT THE MACHINE. wwhttpsw.youtube.com/watch?v=JgTWlLzndDA HERE IS A VIDEO OF THE ACTUAL MACHINE RUNNING
|
|
|
Kwick trench earth saw made by little beaver. Has a honda 8 horse engine. Will make a 12 inch trench. Very good for underground irrigation and dog fences. Buyer will pay for shipping.
|
|
|
Ditch Witch 255sx cable plow. 24 HP Onan. Runs and works great. 786 hours. Has the boring option. If you have any questions. Please call 614-746-9939. I would recommend Uship if you need it transported. Thanks for looking and no PAYPAL on this item.
|
|
HELLO. YOU ARE BIDDING ON A USED Ground Hog Honda Powered T-4 18” Trencher. THIS ITEM IS LIGHTLY USED AND IT IS IN EXCELLENT CONDITION. THIS GROUND HOG T-4 IS IN EXCELLENT CONDITION HOWEVER IT DOES NOT HAVE THE DIGGING CHAIN INCLUDED. WE ACQUIRED THIS GROUND HOG ON 9/28/11 AND NOW IT’S AVAILABLE FOR SALE. THIS GROUND HOG HAS BEEN SITTING NEAR MY WORK STATION INSIDE SINCE WE RECEIVED IT ON 9/28/11. TODAY 3/19/14 IT’S STARTING FOR SALE ON eBay. WE CONTACTED GROUND HOG AND THEY HAVE BOTH CUTTING CHAINS AVAILABLE FOR THIS T-4-H. THE 18” Bullet Cutting Chain is $315. Or if you would prefer the Shark Cutting Chain. That sells for $378. COSMETICALLY THIS TRENCHER IS IN GREAT SHAPE. IT IS USED AND THERE’S SOME MINOR DIRT AND GREASE RESIDUE FROM NORMAL USE. I HAVE PERSONALLY INSPECTED AND TESTED THIS ... moreTRENCHER AND IT WORKS GREAT. IT’S DEPTH CAPACITY IS UP TO 18” DEPTH. IT RUNS GREAT AND IT COULDN’T FIND A SINGLE PROBLEM WITH THIS ENTIRE TRENCHER EXCEPT FOR THE CUTTING CHAIN IS MISSING. NEW CUTTING CHAINS COST FROM $315 TO $378 DEPENDING ON THE CUTTING CHAIN YOU CHOOSE. THE PHOTOS IN THE GALLERY OF THIS AUCTION ARE OF THE EXACT ITEM THAT IS BEING SOLD; THEY ARE NOT COPIED FROM THE MANUFACTURER’S WEBSITE. PHOTOS OF A SIMILAR ITEM OR E-BAY’S STANDARD PHOTO. THEY ARE THE EXACT ITEMS THAT ARE OFFERED IN THIS LISTING FOR SALE. WE USE MORE PHOTOS THAN NECESSARY SO YOU WILL KNOW THE EXACTLY WHAT YOUR BIDDING ON; SO THERE ARE NO SURPRISES! EVERYTHING THAT IS INCLUDED IN THIS AUCTION IS SHOWN IN THE PHOTO GALLERY. IF YOU DON’T SEE IT IN THE PHOTO GALLERY THEN IT IS NOT PART OF THIS AUCTION. PLEASE LOOK AT ALL OF THE PHOTOS CLOSELY TO AVOID ANY CONFUSION. MANUFACTURERS CHANGE THEIR FEATURES& SPECIFICATIONS WITHOUT NOTICE; SOME FEATURES MAY INCLUDE OPTIONAL ITEMS THAT ARE NOT ALWAYS IN OUR AUCTIONS. WE DO OUR BEST TO KEEP OUR DESCRIPTIONS AS ACCURATE AS HUMANLY POSSIBLE. THANK YOU! We strive to make every transaction a 5-Star experience in all categories. If you have any questions or comments please contact us before leaving feedb
|
|
|
VERMEER LM-42 WALK BEHIND COMBINATION TRENCHER S/N: 1VRM112L051002764(2005) DEUTZ 3CYL. 159 HOURS) RUBBER@ 95% RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144dc240d14-0x112-
|
|
up for bid is a 2005 VERMEER RT200 23 HP CHAIN TYPE WALK-BEHIND TRENCHER WITH KOHLER ENGINE! UNIT MUST GO ON FLATBED TO BE SHIPPED TO A COMMERCIAL YARD ONLY WITH LOAD DOCK AND SEMI TRUCK ACCESS/ REQUEST SHIP QUOTE BEFORE YOU OFFER OR BUY! 225 HRS ON METER Tractive Drive Number of drive wheels or track: Drive type to wheels or track* Trencher Ride-on or pedestrian: Operating weight(lbs) Max cutting depth(ft/in) Cutting width: Max chain speed(ft/min) Chain drive type* Dimensions Max travel speed(mph) Transport length(ft/in) Width(ft/in) Height(ft/in) a rental/contractor grade unit. take a look at the pictures and decide before buying at the store. expensive new. unit weighs total 1500 lbs all equipment and parts is sold AS-IS WHERE-IS w/ no warranty. shipping costs are the sole responsibility ... moreof the buyer. yes we ship to canada. you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows this will ship freight. Call or email for ship quote or pick-up is available
|
|
|
Ground Hog Trencher T-4*Honda 5.5 H.P engine. This cost 2700.00 before tax! Very well maintained. The unit has a new sprocket/and NEW SHARK TOOTH CHAIN. Never touched soil. Starts in 1 pull and throttles up great. Tires in great shape. Touched up some surface rust. I have checked units like this that have"sold" and most guys list them when the chain is tired or shot. This one has a 400.00 dollar chain and is ready to go to work. I can drive within 200 miles if you use the buy it now price. You can ship but it would be up to you to pay and set it up. Thanks 952-936-0045 for any additional questions. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1450ebe00f4-0x10a-
|
|
|